Is there anyway to update the firmware on an SA switch?
-
- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
HS4 Pro - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant -
I think the only "official" way is send it to the factory, or maybe WebMountain?
I had spoken to them about doing something (since I've worked with PIC's before), but never came to fruition.
What are you trying to flash? Personally, I'd like to have multiple Links for my US2-40, one for single tap, one for Double Tap.
--DanTasker, to a person who does Homeautomation...is like walking up to a Crack Treatment facility with a truck full of 3lb bags of crack. Then for each person that walks in and out smack them in the face with an open bag. -
Thanks Dan.
It probably doesn't matter; just wanting to see my US2-40's all at the same firmware level when looking at them with Upstart.
Yup one of my US2-40 is at a 01.15 level and the rest are at 01.17 FW level.
Many now are multitoggle and been using multiple links...a little bit at a time...(multi-tap toggling and multiple button switches are high on the WAF lately).
I have a real hodgepodge though of UPB switches; PCS, HAI and SA.- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
HS4 Pro - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home AssistantComment
Comment