Announcement

Collapse
No announcement yet.

4-way example for HS-WD100+ or HS-WS100+ ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    4-way example for HS-WD100+ or HS-WS100+ ?

    Does anyone have an example of how to wire a HS-WD100+ or a HS-WS100+ with two HS-WA100+ in a 4-way circuit?


    Attached is my awesome MS Paint rendition of what I expect I'd do. Grounds not shown and color squares are wire nuts.
    Attached Files

    #2
    Sorry, you got it right.
    Attached Files

    Comment


      #3
      All done. That one was a bit tricky as there are 5 runs of 14/2 and two runs of 14/3 coming into the 2-gang box. I'd hate to see the box fill calculation on that one. It took a while to map everything out, but it's buttoned up and two HS-WD100+ sit in the box and two HS-WA100+ are remotely connected to one of the.

      Comment


        #4
        This is basically what I ended up with as the source was in one of the boxes where an HS-WA100+ was going to be placed and not where the HS-WS100+ was to control the load. Grounds are not shown and each colored circle is a wire nut. I didn't use the second neutral hole on the HS-WS100+ for the WA on the left because another switch lives in the same 2-gang box and it is getting its line and neutral off of this WS' extra holes.
        Attached Files

        Comment

        Working...
        X