I updated to 312, and now none of my x10 devices are working. I am using the standard x10 plugin on com1, with a TI103 interface.
the log shows the x10 commands being sent, but they don't go out at all.
I even have an x10 module plugged into the same outlet as the interface for testing and it doesn't do anything. I've updated all the various plugins, restarted the x10, verified settings, etc.
I am on a HomeSeer Series 3 HomeTroller which as worked fine up until the update.
I know there were upgrades to the device programming with the new link feature, did it affect the x10
Current Date/Time: 3/8/2017 10:15:18 PM
HomeSeer Version: HS3 Pro Edition 3.0.0.312
Operating System: Microsoft Windows XP Professional - Work Station
System Uptime: 0 Days 0 Hours 25 Minutes 41 Seconds
IP Address: 192.168.2.10
Number of Devices: 81
Number of Events: 48
Available Threads: 200
Enabled Plug-Ins
2.0.41.0: BLBackup
2.0.35.0: BLLAN
2.0.7.0: BLMapper
2.0.6.0: BLPlugins
2.0.89.0: BLRF
1.0.3.0: BLShutdown
3.0.0.68: HSTouch Server
3.0.6.0: Insteon
3.0.0.11: NetCAM
1.0.0.5: Restart
3.0.0.36: X10
3.0.1.93: Z-Wave
here is the log entry showing it *should* be working
Mar-08 21:52:19 Info Plugin X10 has connected. IP:127.0.0.1:1582
Mar-08 21:52:20 ACT TI103 Calling initIO in TI103 with port:COM1
Mar-08 21:52:20 Info TI103 Plug-in, Version 3.0.36
Mar-08 21:52:20 Plug-In Finished initializing plug-in X10
and here are the log entries it shows for some commands
Code:
Mar-08 21:53:37 X10 INFO SendX10: M1 Cmd: 3 Dim: 0 Data1/2: 0/0
Mar-08 21:53:39 X10 INFO SendX10: M1 Cmd: 2 Dim: 0 Data1/2: 0/0
Mar-08 21:53:48 X10 INFO SendX10: M1 Cmd: 3 Dim: 0 Data1/2: 0/0
Mar-08 21:53:57 X10 INFO SendX10: N1 Cmd: 3 Dim: 0 Data1/2: 0/0
Mar-08 21:54:01 X10 INFO SendX10: N1 Cmd: 2 Dim: 0 Data1/2: 0/0
Mar-08 21:54:04 X10 INFO SendX10: N1 Cmd: 3 Dim: 0 Data1/2: 0/0
Mar-08 21:54:11 X10 INFO SendX10: N1 Cmd: 3 Dim: 0 Data1/2: 0/0
I been doing this a couple years now, slowly due to funds, so I'm really a noob who has just gotten things to work from reading the boards, til now.
my house is kinda old, the wiring lends itself to x10 a little more than others, although i have some limited use of Insteon and z-wave for locks.
any and all help is appreciated.
Thanks.
the log shows the x10 commands being sent, but they don't go out at all.
I even have an x10 module plugged into the same outlet as the interface for testing and it doesn't do anything. I've updated all the various plugins, restarted the x10, verified settings, etc.
I am on a HomeSeer Series 3 HomeTroller which as worked fine up until the update.
I know there were upgrades to the device programming with the new link feature, did it affect the x10
Current Date/Time: 3/8/2017 10:15:18 PM
HomeSeer Version: HS3 Pro Edition 3.0.0.312
Operating System: Microsoft Windows XP Professional - Work Station
System Uptime: 0 Days 0 Hours 25 Minutes 41 Seconds
IP Address: 192.168.2.10
Number of Devices: 81
Number of Events: 48
Available Threads: 200
Enabled Plug-Ins
2.0.41.0: BLBackup
2.0.35.0: BLLAN
2.0.7.0: BLMapper
2.0.6.0: BLPlugins
2.0.89.0: BLRF
1.0.3.0: BLShutdown
3.0.0.68: HSTouch Server
3.0.6.0: Insteon
3.0.0.11: NetCAM
1.0.0.5: Restart
3.0.0.36: X10
3.0.1.93: Z-Wave
here is the log entry showing it *should* be working
Mar-08 21:52:19 Info Plugin X10 has connected. IP:127.0.0.1:1582
Mar-08 21:52:20 ACT TI103 Calling initIO in TI103 with port:COM1
Mar-08 21:52:20 Info TI103 Plug-in, Version 3.0.36
Mar-08 21:52:20 Plug-In Finished initializing plug-in X10
and here are the log entries it shows for some commands
Code:
Mar-08 21:53:37 X10 INFO SendX10: M1 Cmd: 3 Dim: 0 Data1/2: 0/0
Mar-08 21:53:39 X10 INFO SendX10: M1 Cmd: 2 Dim: 0 Data1/2: 0/0
Mar-08 21:53:48 X10 INFO SendX10: M1 Cmd: 3 Dim: 0 Data1/2: 0/0
Mar-08 21:53:57 X10 INFO SendX10: N1 Cmd: 3 Dim: 0 Data1/2: 0/0
Mar-08 21:54:01 X10 INFO SendX10: N1 Cmd: 2 Dim: 0 Data1/2: 0/0
Mar-08 21:54:04 X10 INFO SendX10: N1 Cmd: 3 Dim: 0 Data1/2: 0/0
Mar-08 21:54:11 X10 INFO SendX10: N1 Cmd: 3 Dim: 0 Data1/2: 0/0
I been doing this a couple years now, slowly due to funds, so I'm really a noob who has just gotten things to work from reading the boards, til now.
my house is kinda old, the wiring lends itself to x10 a little more than others, although i have some limited use of Insteon and z-wave for locks.
any and all help is appreciated.
Thanks.
Comment