Hi,
Using HS3 and BL1Wire plugin.... attached to via com10, using TEMP05 with two sensors, on Windows 7 64bit.
The "sensor" tab shows "there are no sensors configured in the plugin" message...
Yet the log shows that it polling data:
7/19/2015 10:12:01 AM : v2.0.19.0 - comPortObject_DataReceived() started
7/19/2015 10:12:01 AM : v2.0.19.0 - Process_Port() started
7/19/2015 10:12:01 AM : v2.0.19.0 - Process_Port(): mySerialPort.BytesToRead --> 19
7/19/2015 10:12:01 AM : v2.0.19.0 - Process_Port(): theData --> E00080038133B10]=75
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data() started
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data(): comPortData --> E00080038133B10]=75
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data(): Com Port Data:
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data(): d --> E00080038133B10]=75
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data(): Processing d --> E00080038133B10]=75
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data() finished
7/19/2015 10:12:01 AM : v2.0.19.0 - Process_Port() finished
7/19/2015 10:12:01 AM : v2.0.19.0 - comPortObject_DataReceived() finished
Am I missing something on the setup please?
Thanks.
Using HS3 and BL1Wire plugin.... attached to via com10, using TEMP05 with two sensors, on Windows 7 64bit.
The "sensor" tab shows "there are no sensors configured in the plugin" message...
Yet the log shows that it polling data:
7/19/2015 10:12:01 AM : v2.0.19.0 - comPortObject_DataReceived() started
7/19/2015 10:12:01 AM : v2.0.19.0 - Process_Port() started
7/19/2015 10:12:01 AM : v2.0.19.0 - Process_Port(): mySerialPort.BytesToRead --> 19
7/19/2015 10:12:01 AM : v2.0.19.0 - Process_Port(): theData --> E00080038133B10]=75
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data() started
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data(): comPortData --> E00080038133B10]=75
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data(): Com Port Data:
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data(): d --> E00080038133B10]=75
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data(): Processing d --> E00080038133B10]=75
7/19/2015 10:12:01 AM : v2.0.19.0 - ComPortFunctions.Process_Temp05_Com_Port_Data() finished
7/19/2015 10:12:01 AM : v2.0.19.0 - Process_Port() finished
7/19/2015 10:12:01 AM : v2.0.19.0 - comPortObject_DataReceived() finished
Am I missing something on the setup please?
Thanks.
Comment