A small compatibility list for devices that work with DeCONZ and JowiHue plugin and how they operate, what devices to see etc.
There should be some info to fill for what info i desirable.
1) Device Name: Xiaomi Aqara Switch
2) Device manufactor link: https://www.aqara.com/cn/wireless_switch.html
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on remote for 5 sec. it starts to blink blue.
4) What devices to see in HS: 1 device called: lumi.sensor_switch.aq2
5) Status from devices: single, double, triple & quad clicks
5) Devices that could be missing in HS: Battery status, The Shake sensor.
6) How to add additional features: Dont know.
7) How well is it working: Works very well.
8) Build quality: Very good.
9) What DeCONZ versions have been tested: 2.04.86
1) Device Name: Xiaomi Aqara Mi Cube (Magic Cube)
2) Device manufactor link: https://www.aliexpress.com
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on Mi Cube for 5 sec. it starts to blink blue. Keep flipping, twisting shakeing for 2 minutes.
4) What devices to see in HS: 2 devices called: Switch x
5) Status from devices: Flip, rotate, push, dobbelt tap, shake.
5) Devices that could be missing in HS: Battery status.
6) How to add additional features: Dont know.
7) How well is it working: Works very well.
8) Build quality: Very good.
9) What DeCONZ versions have been tested: Added with 2.04.86
1) Device Name: Xiaomi Aqara Smart Windows/Door Sensor
2) Device manufactor link: https://www.aliexpress.com
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on Sensor for 5 sec. it starts to blink blue.
4) What devices to see in HS: 1. Open/Close.
5) Status from devices: Open/Close.
5) Devices that could be missing in HS: Battery status.
6) How to add additional features: Dont know.
7) How well is it working: Dont know yet.
8) Build quality: Very good.
9) What DeCONZ versions have been tested: Added with 2.04.86
1) Device Name: Xiaomi Aqara light & motion sensor ("human body sensor")
2) Device manufactor link: https://www.gearbest.com/alarm-systems/pp_659226.html
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on Sensor for 5 sec. it starts to blink blue. (also ok with Webapp).
4) What devices to see in HS: Motion ON-OFF, battery level (%)
5) Status from devices:
5) Devices that could be missing in HS: Lightlevel is accessible in Phoscon/deCONZ, but NOT in HS
6) How to add additional features: see link
7) How well is it working: good
8) Build quality: Very good
9) What DeCONZ versions have been tested: Added with 2.04.99
1) Device Name: Xiaomi Aqara Temperature Sensor (The one without Pressure)
2) Device manufactor link: https://www.aliexpress.com
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on Sensor for 5 sec. it starts to blink blue.
4) What devices to see in HS: 2. Temperature, Humidity
5) Status from devices: Degree and Humidity values
5) Devices that could be missing in HS: Battery status.
6) How to add additional features: Dont know.
7) How well is it working: Very good. updates often
8) Build quality: Very good.
9) What DeCONZ versions have been tested: Added with 2.04.86
1) Device Name: Xiaomi Smoke sensor (brand name on device is Honeywell)
2) Device manufactor link: https://www.gearbest.com/alarm-systems/pp_615081.html
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on smoke sensor for 5 sec. The siren will sound and a short orange blink will show on the device
4) What devices to see in HS: 1 device with modelid lumi.sensor_smoke, named “Fire nn” where nn is the internal ID
5) Status from devices: True or false for fire
5) Devices that could be missing in HS: Battery status
6) How to add additional features:
7) How well is it working: Works very well.
8) Build quality: Very good.
9) What DeCONZ versions have been tested: 2.05.10
Do you have devices that is missing on this list, then copy my 9 lines and make a new post, i will update this main post.
There should be some info to fill for what info i desirable.
1) Device Name: Xiaomi Aqara Switch
2) Device manufactor link: https://www.aqara.com/cn/wireless_switch.html
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on remote for 5 sec. it starts to blink blue.
4) What devices to see in HS: 1 device called: lumi.sensor_switch.aq2
5) Status from devices: single, double, triple & quad clicks
5) Devices that could be missing in HS: Battery status, The Shake sensor.
6) How to add additional features: Dont know.
7) How well is it working: Works very well.
8) Build quality: Very good.
9) What DeCONZ versions have been tested: 2.04.86
1) Device Name: Xiaomi Aqara Mi Cube (Magic Cube)
2) Device manufactor link: https://www.aliexpress.com
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on Mi Cube for 5 sec. it starts to blink blue. Keep flipping, twisting shakeing for 2 minutes.
4) What devices to see in HS: 2 devices called: Switch x
5) Status from devices: Flip, rotate, push, dobbelt tap, shake.
5) Devices that could be missing in HS: Battery status.
6) How to add additional features: Dont know.
7) How well is it working: Works very well.
8) Build quality: Very good.
9) What DeCONZ versions have been tested: Added with 2.04.86
1) Device Name: Xiaomi Aqara Smart Windows/Door Sensor
2) Device manufactor link: https://www.aliexpress.com
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on Sensor for 5 sec. it starts to blink blue.
4) What devices to see in HS: 1. Open/Close.
5) Status from devices: Open/Close.
5) Devices that could be missing in HS: Battery status.
6) How to add additional features: Dont know.
7) How well is it working: Dont know yet.
8) Build quality: Very good.
9) What DeCONZ versions have been tested: Added with 2.04.86
1) Device Name: Xiaomi Aqara light & motion sensor ("human body sensor")
2) Device manufactor link: https://www.gearbest.com/alarm-systems/pp_659226.html
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on Sensor for 5 sec. it starts to blink blue. (also ok with Webapp).
4) What devices to see in HS: Motion ON-OFF, battery level (%)
5) Status from devices:
5) Devices that could be missing in HS: Lightlevel is accessible in Phoscon/deCONZ, but NOT in HS
6) How to add additional features: see link
7) How well is it working: good
8) Build quality: Very good
9) What DeCONZ versions have been tested: Added with 2.04.99
1) Device Name: Xiaomi Aqara Temperature Sensor (The one without Pressure)
2) Device manufactor link: https://www.aliexpress.com
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on Sensor for 5 sec. it starts to blink blue.
4) What devices to see in HS: 2. Temperature, Humidity
5) Status from devices: Degree and Humidity values
5) Devices that could be missing in HS: Battery status.
6) How to add additional features: Dont know.
7) How well is it working: Very good. updates often
8) Build quality: Very good.
9) What DeCONZ versions have been tested: Added with 2.04.86
1) Device Name: Xiaomi Smoke sensor (brand name on device is Honeywell)
2) Device manufactor link: https://www.gearbest.com/alarm-systems/pp_615081.html
3) How to add to HS: Push jowihue 'Scan for new sensors' and the push button on smoke sensor for 5 sec. The siren will sound and a short orange blink will show on the device
4) What devices to see in HS: 1 device with modelid lumi.sensor_smoke, named “Fire nn” where nn is the internal ID
5) Status from devices: True or false for fire
5) Devices that could be missing in HS: Battery status
6) How to add additional features:
7) How well is it working: Works very well.
8) Build quality: Very good.
9) What DeCONZ versions have been tested: 2.05.10
Do you have devices that is missing on this list, then copy my 9 lines and make a new post, i will update this main post.
Comment