Has anyone successfully included a mimo2+ into homeseer? I have zwave .190 and have tried .194 and I get nothing...suggestions?
Announcement
Collapse
No announcement yet.
FortrezZ Z-WavePlus MiMO2+
Collapse
X
-
Originally posted by ViperJD View PostI have getting it to include. It added 5 devices. The relay work, sending it an off/on signal. My issues is having it detect a SIG1 or SIG2. It seems to only trigger the MultiSensor (both) so I have no idea which one was triggered.HS 4.2.8.0: 2134 Devices 1252 Events
Z-Wave 3.0.10.0: 133 Nodes on one Z-Net
Comment
-
I tried to install a MiMO2+ on my system sometime last November. It did not work. I reached out to HomeSeer and FortrezZ several times. Never could get it to add correctly. FortrezZ was not to much help. Finger pointing ensued.
I sent HomeSeer my MiMO2+ last November on my dime so they had one for testing. I was told that they would try to investigate but could not guarantee any time frame. I understand that resources are finite and that there are other priorities set by business needs so this was not a problem for me.
I like the MiMO2+. I would purchase a few if they worked. I do not know if the problems are something on FortrezZ's side or HomeSeer's. Just fix it! I can't imagine it is that hard to do.
- Likes 1
Comment
-
Originally posted by drhtmal View PostI tried to install a MiMO2+ on my system sometime last November. It did not work. I reached out to HomeSeer and FortrezZ several times. Never could get it to add correctly. FortrezZ was not to much help. Finger pointing ensued.
I sent HomeSeer my MiMO2+ last November on my dime so they had one for testing. I was told that they would try to investigate but could not guarantee any time frame. I understand that resources are finite and that there are other priorities set by business needs so this was not a problem for me.
I like the MiMO2+. I would purchase a few if they worked. I do not know if the problems are something on FortrezZ's side or HomeSeer's. Just fix it! I can't imagine it is that hard to do.
I still have 4 sitting on the shelf (for months) that are paperweights until HS fixes the issue.
--Barry
Comment
-
Once I enrolled 16 of the mimo2+ , but this was a couple years ago. Working close to the Znet , like 3 feet away, and enroll in non-secure mode made it pretty easy.
There is a configuration tool/wizard that helps configure the 2 inputs 2 outputs. I know the jumpers need to be positioned prior to enrolling.Blair
HomeSeer: HS3 Pro | Blue-Iris 4 on Windows10Pro
| Devices: 832 | Events: 211 |
Plug-Ins: Z-Wave | RFXCOM | UltraRachio3 | Sonos
BLLAN | BLLOCK | NetCAM | Global Cache Pro | Blue-Iris4
Comment
-
Originally posted by BlairG View PostOnce I enrolled 16 of the mimo2+ , but this was a couple years ago. Working close to the Znet , like 3 feet away, and enroll in non-secure mode made it pretty easy.
There is a configuration tool/wizard that helps configure the 2 inputs 2 outputs. I know the jumpers need to be positioned prior to enrolling.
1 Photo
Comment
-
PS: I have had good luck using the MIMOLite as a single NO or NC sensor to ZWave device/sensor. I attached the NO input (from my driveway sensor system to the + and - terminals and when a car drives up, a NO/NC/ON/OFF is momentary triggered, a ZWave "Sensor Binary" triggers or flips and events can react to the change.1 Photo
Comment
-
Originally posted by ViperJD View Post
Would love to know what jumpers? Do you get a different set of "Devices" from what I did (see photo in my message above)? I can use SIG1 and SIG2 as inputs, but I can only use "FortezZ Multilevel Sensor" as my ZWave input/sensor, switch means I have no idea which one (SIG1 or SIG2) triggered it.
did you download the tech manual, or the configuration tool? It goes into Sig1 and 2
Blair
HomeSeer: HS3 Pro | Blue-Iris 4 on Windows10Pro
| Devices: 832 | Events: 211 |
Plug-Ins: Z-Wave | RFXCOM | UltraRachio3 | Sonos
BLLAN | BLLOCK | NetCAM | Global Cache Pro | Blue-Iris4
Comment
-
Originally posted by BlairG View Post
My bad, I thought it was jumpers, but instead it is parameters. Mimo lite is jumpers.
did you download the tech manual, or the configuration tool? It goes into Sig1 and 2
I looked at the tech manuals, and it seems to say you can set a few parameters to get the SIG1 and Sig2 to toggle an on/off but I am not sure where to set those. The MIMO+2 looks powerful, but not easy to use. If I cannot figure it out soon, I am just going to use two MINOLites.
Comment
-
You'd set the parameters over on the mimo ZWave tab under settings. Sorry I'm on a tablet or I'd screen shot it. I think the configuration tool just tells you which parameter 1 or 2 gets set to whatever value needed..Blair
HomeSeer: HS3 Pro | Blue-Iris 4 on Windows10Pro
| Devices: 832 | Events: 211 |
Plug-Ins: Z-Wave | RFXCOM | UltraRachio3 | Sonos
BLLAN | BLLOCK | NetCAM | Global Cache Pro | Blue-Iris4
Comment
Comment