I just received a new Keypadlinc today from Smarthome and tried to program the switch and received a message:
8/27/2010 11:21:16 PM Insteon ** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files (x86)\Homeseer HS2\Config\Insteon Error Report.Log
8/27/2010 11:21:16 PM Insteon ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
8/27
8/27/2010 11:24:32 PM Insteon WARNING: The GroupLinkAddress INI section for device 25(16.E4.05) is corrupted. Please delete and re-add your device!
8/27/2010 11:24:32 PM Insteon WARNING: The GroupLinkAddress INI section for device 25(16.E4.05) is corrupted. Please delete and re-add your device!
8/27/2010 11:26:25 PM Insteon ** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files (x86)\Homeseer HS2\Config\Insteon Error Report.Log
8/27/2010 11:26:25 PM Insteon ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
I noticed that when I programmed the switch (It is an 8 button switch) the switch programmed as a 6 button, so I changed it to 8 button and here is my Device Link Table:
Device Link Table
Link #1 Button A/Load has local control reporting to HomeSeer
Link #2 Button B has local control reporting to HomeSeer
Link #3 Button C has local control reporting to HomeSeer
Link #4 Button D has local control reporting to HomeSeer
Link #5 Button E has local control reporting to HomeSeer
Link #6 Button F has local control reporting to HomeSeer
Link #7 Button G has local control reporting to HomeSeer
Link #8 Button H has local control reporting to HomeSeer
Link #10 Button A/Load is controlled by HomeSeer using PLM Database Link #19 (Button Control Group) - On Level 100%, Ramp Rate .1 Sec.
Link #9 Button A/Load is controlled by HomeSeer using PLM Database Link #254 HomeSeer 'All Devices Group' - On Level 100%, Ramp Rate .1 Sec.
Link #11 Button B is controlled by HomeSeer using PLM Database Link #20 (Button Control Group) - Command: On
Link #12 Button C is controlled by HomeSeer using PLM Database Link #21 (Button Control Group) - Command: On
Link #13 Button D is controlled by HomeSeer using PLM Database Link #22 (Button Control Group) - Command: On
Link #14 Button E is controlled by HomeSeer using PLM Database Link #23 (Button Control Group) - Command: On
Link #15 Button F is controlled by HomeSeer using PLM Database Link #24 (Button Control Group) - Command: On
As you can see, I am missing Button G and H. I tried to reread the links or program the links, but no good.
Device Type: KeypadLinc V2 Dimmer
Firmware Version: 36
Comm Reliability: 100% (0 failed out of 62 cmds)
Resume dim mode: False
Default local on level: 100%
Also this must be a new version switch 011c
[Device 25]
DeviceID=16.E4.05
DeviceName=Hallway Keypad
DeviceLocation=Insteon
PollingInterval=0
DeviceType=011C
FirmwareVer=36
DatabaseDelta=127
LinksDownloaded=1
EEValues=DefaultRampRate=31,ResumeDim=128,DefaultOnLevel=255 ,OnLEDMask1=0,OnLEDMask2=0,OnLEDMask3=0,OnLEDMask4=0,OnLEDMa sk5=0,OnLEDMask6=0,OnLEDMask7=0,OnLEDMask8=0,OffLEDMask1=0,O ffLEDMask2=0,OffLEDMask3=0,OffLEDMask4=0,OffLEDMask5=0,OffLE DMask6=0,OffLEDMask7=0,OffLEDMask8=0,NonToggleButtons=0,OpFl ags1=8
GroupLinkAddress 1=19
GroupLinkAddress 2=20
GroupLinkAddress 3=21
GroupLinkAddress 4=22
GroupLinkAddress 5=23
GroupLinkAddress 6=24
Protocol=2
LastContact=8/27/2010 11:54:14 PM
NumLinks=15
RecentDatabaseDelta=127
Link 1=E2 01 0F D4 EF FF 1F 01 1
Link 2=E2 02 0F D4 EF FF 1F 02 2
Link 3=E2 03 0F D4 EF FF 1F 03 3
Link 4=E2 04 0F D4 EF FF 1F 04 4
Link 5=E2 05 0F D4 EF FF 1F 05 5
Link 6=E2 06 0F D4 EF FF 1F 06 6
Link 7=E2 07 0F D4 EF FF 1F 07 7
Link 8=E2 08 0F D4 EF FF 1F 08 8
Link 9=A2 FE 0F D4 EF FF 1F 01 9
Link 10=A2 13 0F D4 EF FF 1F 01 10
Link 11=A2 14 0F D4 EF FF 1F 02 11
Link 12=A2 15 0F D4 EF FF 1F 03 12
Link 13=A2 16 0F D4 EF FF 1F 04 13
Link 14=A2 17 0F D4 EF FF 1F 05 14
Link 15=A2 18 0F D4 EF FF 1F 06 15
Any suggestions?
8/27/2010 11:21:16 PM Insteon ** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files (x86)\Homeseer HS2\Config\Insteon Error Report.Log
8/27/2010 11:21:16 PM Insteon ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
8/27
8/27/2010 11:24:32 PM Insteon WARNING: The GroupLinkAddress INI section for device 25(16.E4.05) is corrupted. Please delete and re-add your device!
8/27/2010 11:24:32 PM Insteon WARNING: The GroupLinkAddress INI section for device 25(16.E4.05) is corrupted. Please delete and re-add your device!
8/27/2010 11:26:25 PM Insteon ** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files (x86)\Homeseer HS2\Config\Insteon Error Report.Log
8/27/2010 11:26:25 PM Insteon ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
I noticed that when I programmed the switch (It is an 8 button switch) the switch programmed as a 6 button, so I changed it to 8 button and here is my Device Link Table:
Device Link Table
Link #1 Button A/Load has local control reporting to HomeSeer
Link #2 Button B has local control reporting to HomeSeer
Link #3 Button C has local control reporting to HomeSeer
Link #4 Button D has local control reporting to HomeSeer
Link #5 Button E has local control reporting to HomeSeer
Link #6 Button F has local control reporting to HomeSeer
Link #7 Button G has local control reporting to HomeSeer
Link #8 Button H has local control reporting to HomeSeer
Link #10 Button A/Load is controlled by HomeSeer using PLM Database Link #19 (Button Control Group) - On Level 100%, Ramp Rate .1 Sec.
Link #9 Button A/Load is controlled by HomeSeer using PLM Database Link #254 HomeSeer 'All Devices Group' - On Level 100%, Ramp Rate .1 Sec.
Link #11 Button B is controlled by HomeSeer using PLM Database Link #20 (Button Control Group) - Command: On
Link #12 Button C is controlled by HomeSeer using PLM Database Link #21 (Button Control Group) - Command: On
Link #13 Button D is controlled by HomeSeer using PLM Database Link #22 (Button Control Group) - Command: On
Link #14 Button E is controlled by HomeSeer using PLM Database Link #23 (Button Control Group) - Command: On
Link #15 Button F is controlled by HomeSeer using PLM Database Link #24 (Button Control Group) - Command: On
As you can see, I am missing Button G and H. I tried to reread the links or program the links, but no good.
Device Type: KeypadLinc V2 Dimmer
Firmware Version: 36
Comm Reliability: 100% (0 failed out of 62 cmds)
Resume dim mode: False
Default local on level: 100%
Also this must be a new version switch 011c
[Device 25]
DeviceID=16.E4.05
DeviceName=Hallway Keypad
DeviceLocation=Insteon
PollingInterval=0
DeviceType=011C
FirmwareVer=36
DatabaseDelta=127
LinksDownloaded=1
EEValues=DefaultRampRate=31,ResumeDim=128,DefaultOnLevel=255 ,OnLEDMask1=0,OnLEDMask2=0,OnLEDMask3=0,OnLEDMask4=0,OnLEDMa sk5=0,OnLEDMask6=0,OnLEDMask7=0,OnLEDMask8=0,OffLEDMask1=0,O ffLEDMask2=0,OffLEDMask3=0,OffLEDMask4=0,OffLEDMask5=0,OffLE DMask6=0,OffLEDMask7=0,OffLEDMask8=0,NonToggleButtons=0,OpFl ags1=8
GroupLinkAddress 1=19
GroupLinkAddress 2=20
GroupLinkAddress 3=21
GroupLinkAddress 4=22
GroupLinkAddress 5=23
GroupLinkAddress 6=24
Protocol=2
LastContact=8/27/2010 11:54:14 PM
NumLinks=15
RecentDatabaseDelta=127
Link 1=E2 01 0F D4 EF FF 1F 01 1
Link 2=E2 02 0F D4 EF FF 1F 02 2
Link 3=E2 03 0F D4 EF FF 1F 03 3
Link 4=E2 04 0F D4 EF FF 1F 04 4
Link 5=E2 05 0F D4 EF FF 1F 05 5
Link 6=E2 06 0F D4 EF FF 1F 06 6
Link 7=E2 07 0F D4 EF FF 1F 07 7
Link 8=E2 08 0F D4 EF FF 1F 08 8
Link 9=A2 FE 0F D4 EF FF 1F 01 9
Link 10=A2 13 0F D4 EF FF 1F 01 10
Link 11=A2 14 0F D4 EF FF 1F 02 11
Link 12=A2 15 0F D4 EF FF 1F 03 12
Link 13=A2 16 0F D4 EF FF 1F 04 13
Link 14=A2 17 0F D4 EF FF 1F 05 14
Link 15=A2 18 0F D4 EF FF 1F 06 15
Any suggestions?
Comment