INSTALLATION / CONFIGURATION
System Requirements:
The EnvisaLink DSC Plug-in is designed to control your DSC Security System using the EnvisaLink interface: http://www.eyezon.com/?page_id=176. Both EVL3 and EVL4 are supported.
This plugin is for HS4/HS4PRO or HS3/HS3PRO. It works with both Windows and Linux versions. For HS2/HS2PRO version click here
Plugin Installation:
Download and install from the updater (Security plug-ins section) or download package from the Beta Testing thread and follow instructions to install.
Plugin Configuration
- Start the plugin from the "PLUG-INS > Manage" page
- Go to the config page "PLUG-INS > EnvisaLink > Config"
Chosse your Inteface Type (EVL3 or EVL4), set the IP Address of your EnvisaLink interface as well as the Password which is the same password than the one used to log into the Envisalink's local web page. It's 6 characters max for EVL3, and 10 characters max for EVL4, and the default one is "user".
Set your number of partitions and zones and your panel's master code.
By default the plug-in will recreate any missing zone devices when it starts, if there are some zones you are not using at all you can manually delete the corresponding devices and then tick the "Do not recreate missing devices" checkbox, this will prevent them to be recreated.
If you have an EVL4 or EVL3 with firmware 1.12.182 or later, you can get additional devices to know the bypassed status of ech zone (Bypassed or Active). If you don't care about this information, simply untick the "Create additional devices for zone bypassed status" checkbox.
In the Zones section, you can rename and change the type of each zone. When "Update zone devices" is clicked all zone devices will be renamed accordingly and status text and icons corresponding to their types will be assigned.
Optionnally, in the User Settings section, assign one or several DSC User Ids to HS users. To create new HS users go to "Tools > Setup > Network tab". To assign more than one DSC User Ids to one HS User, separate the ids with dashes.
If you tick the "Log to File" checkbox, logs will be written to Logs/EnvisaLink.txt, and you will be able to choose a specific log level for the file. The first "Log Level" setting is for the logs written to the HS logs database. To troubleshoot any problem I would recommend to set at least one of these log level to Debug to be able to see all the messages sent by the panel.
Comment