Originally posted by Vladimirkousa
View Post
Announcement
Collapse
No announcement yet.
Plug in not communicating with Rachio
Collapse
X
-
iCore5 Win 10 Pro x64 SSD
HS3 Pro Edition 3.0.0.435 Windows
BLOccupied:,Device History:,Yamaha:,UltraMon3:,mcsXap:,Restart:,UltraNetatmo3:, UltraM1G3:,Ultra1Wire3:,BLBackup:,Harmony Hub:,DoorBird:,UltraECM3:,Nanoleaf 3P:,UltraRachio3:,Z-Wave:,SDJ-Health:,BLGarbage:,Blue-Iris:,Chromecast:,Pushover 3P:,EasyTrigger:
-
Originally posted by Ultrajones View PostHello Marty,
Please update to the version I just updated to the HomeSeer updater to see if it resolves the issue you reported.
Regards,
Ultrajones
Thanks for working on this by the way. I have 6 of your plugins and find them to be top notch.iCore5 Win 10 Pro x64 SSD
HS3 Pro Edition 3.0.0.435 Windows
BLOccupied:,Device History:,Yamaha:,UltraMon3:,mcsXap:,Restart:,UltraNetatmo3:, UltraM1G3:,Ultra1Wire3:,BLBackup:,Harmony Hub:,DoorBird:,UltraECM3:,Nanoleaf 3P:,UltraRachio3:,Z-Wave:,SDJ-Health:,BLGarbage:,Blue-Iris:,Chromecast:,Pushover 3P:,EasyTrigger:
Comment
-
I just uploaded UltraRachio3 HSPI version 3.0.6660.11524. It adds the min/max temperatures back after Rachio fixed the API last night. The rain delay also appears to be working again. I'll do more testing tonight to see if there are any other remain issues.
Regards,
UltrajonesPlug-ins: UltraMon, UltraM1G, UltraCID, Ultra1Wire, UltraLog, UltraWeatherBug, UltraPioneerAVR, UltraGCIR
Comment
-
I just posted UltraRachio3 HSPI version 3.0.6660.35733. I believe it resolves all of the outstanding issues. Please post if you experience any issues.
Note: Previous versions were polling the service in violation of the Rachio newly published API query limits. If your "Rachio API Remaining" device shows 0, then you won't be able to query until the "Rachio API Reset" device value reaches 0. After it resets, you shouldn't experience any issues going forward.
Note: If you set the update interval to once per minute, then approximately 1,488 API queries will be consumed just to keep the devices up to date. That leaves only 212 additional queries every 24 hours. Every time you send a command, it requires 1 for the command and up to 2 additional status queries (depending on the command). That means you have about 70 commands you can send per day (e.g. Zone On/Off, Schedule On/Off, Online/Offline, etc.) which shouldn't be an issue for most users.
Regards,
UltrajonesLast edited by Ultrajones; March 27, 2018, 07:19 PM.Plug-ins: UltraMon, UltraM1G, UltraCID, Ultra1Wire, UltraLog, UltraWeatherBug, UltraPioneerAVR, UltraGCIR
Comment
-
After updating plug-in (needed to delete all files and directories) I can see graph like in previous post, and values are updating every 1 min for API remaining and API reset.
However, I do not see update of status for "Rachio1 Current Temperature" and all other entries. It is stuck about 10 hours ago. I would assume that current temperature should be updated every 1 min (or I do not understand something).
Another observation - I have 2 schedules, and the names of the schedules are old names. I changed the names (at Rachio app) for different ones, but still see at homeseer old names.
Zones names in plugin are Zone1, Zone2 ....not uploaded from Rachio app.
Just for reminder I am running Homeseer on Linux
Thanks
VladiLast edited by Vladimirkousa; March 28, 2018, 11:52 PM.
Comment
-
Originally posted by Ultrajones View PostI just posted UltraRachio3 HSPI version 3.0.6660.35733. I believe it resolves all of the outstanding issues. Please post if you experience any issues.
Note: Previous versions were polling the service in violation of the Rachio newly published API query limits. If your "Rachio API Remaining" device shows 0, then you won't be able to query until the "Rachio API Reset" device value reaches 0. After it resets, you shouldn't experience any issues going forward.
Note: If you set the update interval to once per minute, then approximately 1,488 API queries will be consumed just to keep the devices up to date. That leaves only 212 additional queries every 24 hours. Every time you send a command, it requires 1 for the command and up to 2 additional status queries (depending on the command). That means you have about 70 commands you can send per day (e.g. Zone On/Off, Schedule On/Off, Online/Offline, etc.) which shouldn't be an issue for most users.
Regards,
Ultrajones
I'm running the current version of the PI and am noticing that two devices in each zone have not updated since 5/10/2016, "Total Runtime" & "Max Runtime", have these been dropped from the API?
Also, you will notice that the "Last Durration" hasn't been updated for quite some time and I know that the time hasn't been consistently the same amount of time for that long.
I have tried shutting down and restarting the plugin but nothing seems to update these devices.HS4 4.2.6.0 &HSTouch Designer 3.0.80
Plugin's:
BLBackup, BLOccupied, BLShutdown, EasyTrigger, Ecobee, Nest, AK Bond
EnvisaLink DSC, PHLocation, Pushover, SONOS, Blue Iris, UltraRachio3,
weatherXML, Jon00 Alexa Helper, Network Monitor, MyQ, Z-Wave
Comment
-
My Rachio plug-in is not communicating propertly with Rachio controller. Still waiting for reply from UltraJones.
I can see you are using mcssprinklers. I used it with HS2 until had no choice and moved to HS3 on Linux. I missed mcssprinklers (not compatible with Linux). It was much more stable, predictable and lot of customization.
I would suggest staying with mcssprinklers if you can. Rachio software is running on cloud and they are changing software continuously without telling integrators what they changed. I think it is fundamental problem going forward.
Maybe others have better experience.
VladiLast edited by Vladimirkousa; March 31, 2018, 02:27 PM.
Comment
-
If you are still experiencing issues with the plug-in, then please post a list of items so I can attempt to duplicate. At this point, everything is working on my system, so there are no known issues except the list below.
Known issues caused by the Rachio API changes:
1) The Rachio Zone Max Runtime and Rachio Zone Total Runtime were removed from the API.
2) The Rachio Weather Conditions icon is wrong. It always displays the clear day icon.
Regards,
UltrajonesPlug-ins: UltraMon, UltraM1G, UltraCID, Ultra1Wire, UltraLog, UltraWeatherBug, UltraPioneerAVR, UltraGCIR
Comment
-
Originally posted by Ultrajones View PostIf you are still experiencing issues with the plug-in, then please post a list of items so I can attempt to duplicate. At this point, everything is working on my system, so there are no known issues except the list below.
Known issues caused by the Rachio API changes:
1) The Rachio Zone Max Runtime and Rachio Zone Total Runtime were removed from the API.
2) The Rachio Weather Conditions icon is wrong. It always displays the clear day icon.
Regards,
UltrajonesHS4 4.2.6.0 &HSTouch Designer 3.0.80
Plugin's:
BLBackup, BLOccupied, BLShutdown, EasyTrigger, Ecobee, Nest, AK Bond
EnvisaLink DSC, PHLocation, Pushover, SONOS, Blue Iris, UltraRachio3,
weatherXML, Jon00 Alexa Helper, Network Monitor, MyQ, Z-Wave
Comment
-
`Next
"Todays weather conditions" was updated 1/2 hour ago, but is inconsistent with Rachio app. Rachio app is showing "Rain"
"Current weather update" - different devices were updated at different times, and do not match real weather. I would assume that "current temperature" should be updated every hour. But I do not know how to correlated it with Rachio app, as I can't find current temperature there. But "current temperature is higher.
What is the difference between "Todays weather conditions" and "Current weather update"?Last edited by Vladimirkousa; April 7, 2018, 01:07 PM.
Comment
Comment