aldo, need to have a debug for operation before the 500 limit was reached. The morning rather than afternoon debug should have it.
Announcement
Collapse
No announcement yet.
Problems with .16 of mcsSprinker Pro
Collapse
X
-
@Aldo, took a look at my WU account and it seems to just be a 500 limit per day download. Couldn't figure out where the current download number was but by the end of the day I'm in access of 1800 downloads according to the plugin. I won't complain.
RobertHS3PRO 3.0.0.500 as a Fire Daemon service, Windows 2016 Server Std Intel Core i5 PC HTPC Slim SFF 4GB, 120GB SSD drive, WLG800, RFXCom, TI103,NetCam, UltraNetcam3, BLBackup, CurrentCost 3P Rain8Net, MCsSprinker, HSTouch, Ademco Security plugin/AD2USB, JowiHue, various Oregon Scientific temp/humidity sensors, Z-Net, Zsmoke, Aeron Labs micro switches, Amazon Echo Dots, WS+, WD+ ... on and on.
Comment
-
The download of weather data has been made more intelligent with 2.17.0.18 to reduce the number of daily downloads. It now evaluates all other conditions and only increases the wind data download rate if the other conditions do not result in an inhibit. Previously it would always download data at 5 minute intervals if a wind inhibit was setup. I also changed the backup algorithm so that backup downloads would only be done if 4 download attempts were not successful from a priority station on any given day. It will try the primary station again the next day. This means that there is no downside to including multiple WU stations. It will also greatly reduce the number of downloads performed when when inhibits are setup.
Comment
-
Originally posted by Michael McSharry View PostThe download of weather data has been made more intelligent with 2.17.0.18 to reduce the number of daily downloads. It now evaluates all other conditions and only increases the wind data download rate if the other conditions do not result in an inhibit. Previously it would always download data at 5 minute intervals if a wind inhibit was setup. I also changed the backup algorithm so that backup downloads would only be done if 4 download attempts were not successful from a priority station on any given day. It will try the primary station again the next day. This means that there is no downside to including multiple WU stations. It will also greatly reduce the number of downloads performed when when inhibits are setup.
@Michael, thank you so much for these changes, now I don't need to worry too much going over the limit and having a feature to one of the stations. This plugin is rocket solid made by genius.
Aldo
Sent from my SM-G935V using Tapatalk
Comment
-
Originally posted by Michael McSharry View PostThe download of weather data has been made more intelligent with 2.17.0.18 to reduce the number of daily downloads. It now evaluates all other conditions and only increases the wind data download rate if the other conditions do not result in an inhibit. Previously it would always download data at 5 minute intervals if a wind inhibit was setup. I also changed the backup algorithm so that backup downloads would only be done if 4 download attempts were not successful from a priority station on any given day. It will try the primary station again the next day. This means that there is no downside to including multiple WU stations. It will also greatly reduce the number of downloads performed when when inhibits are setup.
I have an inhibit setup for wind if it reaches 12 km/h for 20 minutes. Is there a situation where this won't be evaluated and therefore no update performed?
...a bit unclear here.
RobertHS3PRO 3.0.0.500 as a Fire Daemon service, Windows 2016 Server Std Intel Core i5 PC HTPC Slim SFF 4GB, 120GB SSD drive, WLG800, RFXCom, TI103,NetCam, UltraNetcam3, BLBackup, CurrentCost 3P Rain8Net, MCsSprinker, HSTouch, Ademco Security plugin/AD2USB, JowiHue, various Oregon Scientific temp/humidity sensors, Z-Net, Zsmoke, Aeron Labs micro switches, Amazon Echo Dots, WS+, WD+ ... on and on.
Comment
-
The weather current conditions download will be done every 30 minutes except the following case:
1. Area/Site where a zone is running or scheduled to run within the next 30 minutes
2. No other non-wind inhibit is active thus preventing a zone from running
3. Area/Site is setup with a wind inhibit criteria
When these three situations occur the weather download is done every 5 minutes to provide greater sensitivity to changes in wind conditions. Previously the only criteria was #3 so downloads were occurring at a time when wind information was not as time sensitive.
Comment
-
Originally posted by Michael McSharry View PostThe weather current conditions download will be done every 30 minutes except the following case:
1. Area/Site where a zone is running or scheduled to run within the next 30 minutes
2. No other non-wind inhibit is active thus preventing a zone from running
3. Area/Site is setup with a wind inhibit criteria
When these three situations occur the weather download is done every 5 minutes to provide greater sensitivity to changes in wind conditions. Previously the only criteria was #3 so downloads were occurring at a time when wind information was not as time sensitive.
Sent from my SM-G935V using Tapatalk
Comment
-
Michael,
I wanted to point out that in the latest build, if you disable for seasonal shutdown, after the plugin restarts or HS restarts, it doesn't persist this and continues to execute as though no seasonal shutdown event occurred.
RobertHS3PRO 3.0.0.500 as a Fire Daemon service, Windows 2016 Server Std Intel Core i5 PC HTPC Slim SFF 4GB, 120GB SSD drive, WLG800, RFXCom, TI103,NetCam, UltraNetcam3, BLBackup, CurrentCost 3P Rain8Net, MCsSprinker, HSTouch, Ademco Security plugin/AD2USB, JowiHue, various Oregon Scientific temp/humidity sensors, Z-Net, Zsmoke, Aeron Labs micro switches, Amazon Echo Dots, WS+, WD+ ... on and on.
Comment
-
So it's off season for me with regards to irrigation. Running 2.17.0.19, if I restart HS for any reason, I always need to manually deactivate McsSprinkler after each reboot. Otherwise, I wake up to errors with the zones not responding (my rainbird is powered off during the winter).
Is there anyway to persist the fact that a seasonal shutdown has been invoked?
RobertHS3PRO 3.0.0.500 as a Fire Daemon service, Windows 2016 Server Std Intel Core i5 PC HTPC Slim SFF 4GB, 120GB SSD drive, WLG800, RFXCom, TI103,NetCam, UltraNetcam3, BLBackup, CurrentCost 3P Rain8Net, MCsSprinker, HSTouch, Ademco Security plugin/AD2USB, JowiHue, various Oregon Scientific temp/humidity sensors, Z-Net, Zsmoke, Aeron Labs micro switches, Amazon Echo Dots, WS+, WD+ ... on and on.
Comment
-
Don't know if it has always been this way, but I suspect something may have changed with HS that is causing this behavior. With HS versions of mcsSprinklers the management of devices is handled by HS. This assures that only one master exists for the content of a device. This means that when HS shuts down and then restarts I expect HS to restore the content of devices at the time of startup. I suspect what has happened is that HS no longer manages the initialization of plugin devices and it expect the plugin to initialize the startup condition. I can understand this philosophy and will accommodate. It also means that there are other devices (e.g. inhibit tomorrow) that are not being initialized correctly with HS3.
Comment
Comment