Announcement

Collapse
No announcement yet.

UDMC with dim?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    UDMC with dim?

    Only the ON command get fired in this UDMC:

    blradar.PluginFunction("ControlDevice", new Object(){"1ST FLOOR Bath Reading Light","dim",50})
    blradar.PluginFunction("ControlDevice", new Object(){"1ST FLOOR Bath Mirror Lights","dim",70})
    blradar.PluginFunction("ControlDevice", new Object(){"1ST FLOOR Bath Fan","ON",0})

    the devices being set to dim level are defined as dimmable & can be controlled from the hs gui.
    Larry

    #2
    Check the status graphics for the device in HS3 and see if device is a valid CAPI command
    Cheers,
    Bob
    Web site | Help Desk | Feature Requests | Message Board

    Comment


      #3
      Bob, bare with me. I am green when it comes to HS3 & Radar. It looks to me that the device is standard dimmable X10 device in HS3:



      If I can dim in HS3 then I should be able to do the same in Radar? To test the control using CAPI command I used TenScriptAid & could also control the device.

      Am I understanding your suggestion?
      Larry

      Comment


        #4
        OK turn on debug logging in the plugin and then run the UDMC
        Turn off debug logging and attach the debug log zipped
        Cheers,
        Bob
        Web site | Help Desk | Feature Requests | Message Board

        Comment


          #5
          Thanks for taking a look
          Attached Files
          Larry

          Comment


            #6
            Try 2.0.122 in the updater
            Cheers,
            Bob
            Web site | Help Desk | Feature Requests | Message Board

            Comment


              #7
              sorry bob, no change. The DIM does not seem to function with x10 devices. The same statements in my other UDMC that reference Zwave devices work as expected.
              Larry

              Comment


                #8
                Can you run the attach script and attach the output log zipped
                Place the script in the scripts folder and run it
                The log will be in the HS3 root folder
                Attached Files
                Cheers,
                Bob
                Web site | Help Desk | Feature Requests | Message Board

                Comment


                  #9
                  thanks
                  Attached Files
                  Larry

                  Comment


                    #10
                    Can you capture a new debug log of the ControlDevice command again with the new version
                    Delete the old debug log first

                    Attach it zipped
                    Cheers,
                    Bob
                    Web site | Help Desk | Feature Requests | Message Board

                    Comment


                      #11
                      thank you
                      Attached Files
                      Larry

                      Comment


                        #12
                        OK this just seems to be an issue with X10
                        Let me try something once I am home tonight and will get a new build out
                        Cheers,
                        Bob
                        Web site | Help Desk | Feature Requests | Message Board

                        Comment


                          #13
                          Try 2.0.123 in the updater
                          Cheers,
                          Bob
                          Web site | Help Desk | Feature Requests | Message Board

                          Comment


                            #14
                            That did the trick!

                            Thanks for your efforts. Time to install multiple additional Blade plugins.
                            Larry

                            Comment


                              #15
                              Glad it is working now
                              Cheers,
                              Bob
                              Web site | Help Desk | Feature Requests | Message Board

                              Comment

                              Working...
                              X