Announcement

Collapse
No announcement yet.

Hub Multiple Links

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hub Multiple Links

    is this normal? under one of my switches I've got it listed 3 times with different settings:

    Link #4 Switch/Load is controlled by Virtual Insteon Hub (3C.C2.9A) - On Level: 0%, Ramp Rate: .1 Sec.
    Link #1 Switch/Load is controlled by Virtual Insteon Hub (3C.C2.9A) - On Level: 0%, Ramp Rate: .5 Sec.
    Link #3 Switch/Load is controlled by Virtual Insteon Hub (3C.C2.9A) - On Level: 100%, Ramp Rate: .1 Sec.

    #2
    The multiple links are ok, see mine below. What's unusual with yours is the "Virtual Insteon Hub" controller. Did you by any chance try to add the Insteon Hub? The only interface with the Hub should be HomeSeer.

    Link #1 Switch/Load is controlled by HomeSeer using Hub Group #0 (i2CS Registration Link) - On Level: 0%, Ramp Rate: .5 Sec.
    Link #6 Switch/Load is controlled by HomeSeer using Hub Group #0 (i2CS Registration Link) - On Level: 0%, Ramp Rate: 2 Sec.
    Link #3 Switch/Load is controlled by HomeSeer using Hub Group #254 (HomeSeer All Devices Group) - On Level: 100%, Ramp Rate: 2 Sec.

    Comment


      #3
      Originally posted by dhogan View Post
      is this normal? under one of my switches I've got it listed 3 times with different settings:

      Link #4 Switch/Load is controlled by Virtual Insteon Hub (3C.C2.9A) - On Level: 0%, Ramp Rate: .1 Sec.
      Link #1 Switch/Load is controlled by Virtual Insteon Hub (3C.C2.9A) - On Level: 0%, Ramp Rate: .5 Sec.
      Link #3 Switch/Load is controlled by Virtual Insteon Hub (3C.C2.9A) - On Level: 100%, Ramp Rate: .1 Sec.
      can you post the link data from the insteon.ini for this device.

      my guess is one or more of these links was created outside homeseer.

      links 3 & 4 may never get used because #1 looks similar.
      Mark

      HS3 Pro 4.2.19.5
      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
      Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

      Comment


        #4
        Originally posted by claude View Post
        The multiple links are ok, see mine below. What's unusual with yours is the "Virtual Insteon Hub" controller. Did you by any chance try to add the Insteon Hub? The only interface with the Hub should be HomeSeer.

        Link #1 Switch/Load is controlled by HomeSeer using Hub Group #0 (i2CS Registration Link) - On Level: 0%, Ramp Rate: .5 Sec.
        Link #6 Switch/Load is controlled by HomeSeer using Hub Group #0 (i2CS Registration Link) - On Level: 0%, Ramp Rate: 2 Sec.
        Link #3 Switch/Load is controlled by HomeSeer using Hub Group #254 (HomeSeer All Devices Group) - On Level: 100%, Ramp Rate: 2 Sec.
        It looks like that's what I did...somehow. Good catch.

        Comment


          #5
          Originally posted by dhogan View Post
          It looks like that's what I did...somehow. Good catch.
          i don't know which one to tell you to delete, but only delete one of the Group 0 links
          Mark

          HS3 Pro 4.2.19.5
          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

          Comment

          Working...
          X