Originally posted by sparkman
View Post
Announcement
Collapse
No announcement yet.
DOT Files
Collapse
X
-
Originally posted by sparkman View PostCan you post the screen shots of your messages and DOT file lists from the BLLED plugin page? That's where I found you need to set them first.
Message A:
{transition=rotate}{font=compressedRotate} >- Message A -< {transition=rotate}{font=compressedRotate}
Message B:
{callpic=B}
DOT-Checkerboard, 7x80, enabled
DOT-Runner, 7x30, enabled
Startup Sequence: AB, Office sign enabledhuggy_d1
Automating made easy
Comment
-
I think it depends on the size of the picture. I do have some images working with it still set to 100. 100 means 100 bytes, so not a lot of space. Not sure how the BB stores it in internally though. I would increase the number to something much larger and if it starts working, reduce it down. Alternately, try a small one such as the one Bob had provided (attached) and see if you can get it working.
Cheers
AlHS 4.2.8.0: 2134 Devices 1252 Events
Z-Wave 3.0.10.0: 133 Nodes on one Z-Net
Comment
-
I tried a size of 2300.
What's the proper sequence once setting it to 2300 to get the BB to accept and allow me to set an image?
I tried hard reset, soft reset, then load image and set message with callpic.
Do I need to power cycle the unit after doing all this size change stuff?huggy_d1
Automating made easy
Comment
-
Originally posted by sparkman View PostTry the initialize through the plugin web-page and include the message ID in the sequence. What does the sign display?
Cheers
Al
I still get nothing. What am I doing wrong now...huggy_d1
Automating made easy
Comment
-
Ok I got it to work, but I have two problems.
When I have the message set to 7x30 it does not work. When I edit the DOT file to 7x80 and do everything (initialize, set picture, soft reset) it works.
When I initialize the display, I get an error message in the log about a picture file not present, but the log shows it sent both picture files properly. It's like it is looping 1 extra time and then does not find an image.
I feel better knowing why my DOT file would not display. The big thing was you telling me about the Initialize is CLICKABLE!
I thought it was a status message.huggy_d1
Automating made easy
Comment
-
Glad you're making progress. I have both small files (5x7, 9x7) and large files (80x7) working. Were you able to get the music note to display? With the errors, I would try and grab a debug and ask Bob to look at it. Even when mine does not work, I never get an error in the log for it.
Cheers
AlHS 4.2.8.0: 2134 Devices 1252 Events
Z-Wave 3.0.10.0: 133 Nodes on one Z-Net
Comment
Comment