Hi Mark,
I'm up and running on HS3. I'm running 3.0.64. I have a KPL with two buttons set to "Non toggle off". When I press the buttons I get:
Dec-25 3:44:44 PM Insteon Received 19.41.F9:8 (Kitchen Button H Volume Down) Go OFF
Dec-25 3:44:27 PM Insteon Received 19.41.F9:7 (Kitchen Button G Volume Up) Go OFF
However, I can't trigger any events (or in the new parlance, use them as IF statements and have them fire) with the button pushes. I use these buttons to raise and lower the volume on my sonos system by a fixed amount.
In HS2, the button worked fine using the trigger "Set to Any".
Further, when I try to Save the device in HS3, I get an error:
"Kitchen Sonos Control KPL (left) (19.41.F9) buttons programming failed."
Here is the relevant section of the ini file:
[Device 18]
DeviceID=19.41.F9
DeviceName=Sonos Control KPL (left)
DeviceLocation=Kitchen
DeviceType=011C
FirmwareVer=39
EEValues=LEDBrightness=63,NonToggleButtons=192,NonToggleOnOf f=0,OnLEDMask1=62,OffLEDMask1=62,DefaultOnLevel=255,DefaultR ampRate=24,OnLEDMask2=61,OffLEDMask2=61,OnLEDMask3=59,OffLED Mask3=59,OnLEDMask4=55,OffLEDMask4=55,OnLEDMask5=47,OffLEDMa sk5=47,OnLEDMask6=31,OffLEDMask6=31,OnLEDMask7=0,OffLEDMask7 =0,OnLEDMask8=0,OffLEDMask8=0,OpFlags1=12
DatabaseDelta=0
RecentDatabaseDelta=0
PollingInterval=0
LastContact=12/25/2016 3:54:04 PM
HopData=987,950,33,4
Protocol=2
TotalInteractions=419
FailedInteractions=26
HSControlMode=0
LinksDownloaded=1
NumLinks=29
GroupLinkAddress 1=33
GroupLinkAddress 2=34
GroupLinkAddress 3=35
GroupLinkAddress 4=36
GroupLinkAddress 5=37
GroupLinkAddress 6=38
GroupLinkAddress 7=39
GroupLinkAddress 8=40
ChannelName1=Button A WBUR
ChannelName2=Button B Pandora Post Natural
ChannelName3=Button C One Direction
ChannelName4=Button D Pandora Queen
ChannelName5=Button E WEEI
ChannelName6=Button F Pandora Mozart
ChannelName7=Button G Volume Up
ChannelName8=Button H Volume Down
SyncLinkedDevices=0
NoChannelSync=0
Link 1=E2 01 21 30 7B FF 1F 01 1
Link 2=E2 02 21 30 7B FF 1F 02 2
Link 3=E2 03 21 30 7B FF 1F 03 3
Link 4=E2 04 21 30 7B FF 1F 04 4
Link 5=E2 05 21 30 7B FF 1F 05 5
Link 6=E2 06 21 30 7B FF 1F 06 6
Link 7=E2 07 21 30 7B FF 1F 07 7
Link 8=E2 08 21 30 7B FF 1F 08 8
Link 9=A2 FE 21 30 7B FF 1F 01 9
Link 10=A2 21 21 30 7B FF 1F 01 10
Link 11=A2 22 21 30 7B FF 1F 02 11
Link 12=A2 23 21 30 7B FF 1F 03 12
Link 13=A2 24 21 30 7B FF 1F 04 13
Link 14=A2 25 21 30 7B FF 1F 05 14
Link 15=A2 26 21 30 7B FF 1F 06 15
Link 16=A2 27 21 30 7B FF 1F 07 16
Link 17=A2 28 21 30 7B FF 1F 08 17
Link 18=A2 3F 21 30 7B FF 1F 01 18
Link 19=A2 3F 21 30 7B FF 1F 02 19
Link 20=A2 3F 21 30 7B FF 1F 03 20
Link 21=A2 3F 21 30 7B FF 1F 04 21
Link 22=A2 3F 21 30 7B FF 1F 05 22
Link 23=A2 3F 21 30 7B FF 1F 06 23
Link 24=A2 17 21 30 7B FF 1F 01 24
Link 25=A2 17 21 30 7B FF 1F 02 25
Link 26=A2 17 21 30 7B FF 1F 03 26
Link 27=A2 17 21 30 7B FF 1F 04 27
Link 28=A2 17 21 30 7B FF 1F 05 28
Link 29=A2 17 21 30 7B FF 1F 06 29
Any sense of what I can do?
Kind regards and happy holidays
Jono
I'm up and running on HS3. I'm running 3.0.64. I have a KPL with two buttons set to "Non toggle off". When I press the buttons I get:
Dec-25 3:44:44 PM Insteon Received 19.41.F9:8 (Kitchen Button H Volume Down) Go OFF
Dec-25 3:44:27 PM Insteon Received 19.41.F9:7 (Kitchen Button G Volume Up) Go OFF
However, I can't trigger any events (or in the new parlance, use them as IF statements and have them fire) with the button pushes. I use these buttons to raise and lower the volume on my sonos system by a fixed amount.
In HS2, the button worked fine using the trigger "Set to Any".
Further, when I try to Save the device in HS3, I get an error:
"Kitchen Sonos Control KPL (left) (19.41.F9) buttons programming failed."
Here is the relevant section of the ini file:
[Device 18]
DeviceID=19.41.F9
DeviceName=Sonos Control KPL (left)
DeviceLocation=Kitchen
DeviceType=011C
FirmwareVer=39
EEValues=LEDBrightness=63,NonToggleButtons=192,NonToggleOnOf f=0,OnLEDMask1=62,OffLEDMask1=62,DefaultOnLevel=255,DefaultR ampRate=24,OnLEDMask2=61,OffLEDMask2=61,OnLEDMask3=59,OffLED Mask3=59,OnLEDMask4=55,OffLEDMask4=55,OnLEDMask5=47,OffLEDMa sk5=47,OnLEDMask6=31,OffLEDMask6=31,OnLEDMask7=0,OffLEDMask7 =0,OnLEDMask8=0,OffLEDMask8=0,OpFlags1=12
DatabaseDelta=0
RecentDatabaseDelta=0
PollingInterval=0
LastContact=12/25/2016 3:54:04 PM
HopData=987,950,33,4
Protocol=2
TotalInteractions=419
FailedInteractions=26
HSControlMode=0
LinksDownloaded=1
NumLinks=29
GroupLinkAddress 1=33
GroupLinkAddress 2=34
GroupLinkAddress 3=35
GroupLinkAddress 4=36
GroupLinkAddress 5=37
GroupLinkAddress 6=38
GroupLinkAddress 7=39
GroupLinkAddress 8=40
ChannelName1=Button A WBUR
ChannelName2=Button B Pandora Post Natural
ChannelName3=Button C One Direction
ChannelName4=Button D Pandora Queen
ChannelName5=Button E WEEI
ChannelName6=Button F Pandora Mozart
ChannelName7=Button G Volume Up
ChannelName8=Button H Volume Down
SyncLinkedDevices=0
NoChannelSync=0
Link 1=E2 01 21 30 7B FF 1F 01 1
Link 2=E2 02 21 30 7B FF 1F 02 2
Link 3=E2 03 21 30 7B FF 1F 03 3
Link 4=E2 04 21 30 7B FF 1F 04 4
Link 5=E2 05 21 30 7B FF 1F 05 5
Link 6=E2 06 21 30 7B FF 1F 06 6
Link 7=E2 07 21 30 7B FF 1F 07 7
Link 8=E2 08 21 30 7B FF 1F 08 8
Link 9=A2 FE 21 30 7B FF 1F 01 9
Link 10=A2 21 21 30 7B FF 1F 01 10
Link 11=A2 22 21 30 7B FF 1F 02 11
Link 12=A2 23 21 30 7B FF 1F 03 12
Link 13=A2 24 21 30 7B FF 1F 04 13
Link 14=A2 25 21 30 7B FF 1F 05 14
Link 15=A2 26 21 30 7B FF 1F 06 15
Link 16=A2 27 21 30 7B FF 1F 07 16
Link 17=A2 28 21 30 7B FF 1F 08 17
Link 18=A2 3F 21 30 7B FF 1F 01 18
Link 19=A2 3F 21 30 7B FF 1F 02 19
Link 20=A2 3F 21 30 7B FF 1F 03 20
Link 21=A2 3F 21 30 7B FF 1F 04 21
Link 22=A2 3F 21 30 7B FF 1F 05 22
Link 23=A2 3F 21 30 7B FF 1F 06 23
Link 24=A2 17 21 30 7B FF 1F 01 24
Link 25=A2 17 21 30 7B FF 1F 02 25
Link 26=A2 17 21 30 7B FF 1F 03 26
Link 27=A2 17 21 30 7B FF 1F 04 27
Link 28=A2 17 21 30 7B FF 1F 05 28
Link 29=A2 17 21 30 7B FF 1F 06 29
Any sense of what I can do?
Kind regards and happy holidays
Jono
Comment