Adam, for some reason as soon as I turn a valve on it immediately goes back off. Just now getting warm enough here to run sprinklers. This is the first time I have tried to run them. Here is debug info:
Apr-02 8:49:50 PM EZFlora Debug HSEvent GENERIC Case: Parms = ACK 40 00 01 19 BE 07 1E DB 1A 27 40 00
Apr-02 8:49:50 PM EZFlora Debug Entered HSEvent GENERIC Case
Apr-02 8:49:50 PM EZFlora Info EZFlora 19.BE.07 all programs off
Apr-02 8:49:50 PM EZFlora Debug Entered ProcessProgramsOff() subroutine.
Apr-02 8:49:50 PM EZFlora Info EZFlora 19.BE.07 all valves off
Apr-02 8:49:50 PM EZFlora Debug Entered ProcessValvesOff() subroutine.
Apr-02 8:49:50 PM EZFlora Debug HSEvent GENERIC Case: Parms = 01 19 BE 07 1E DB 1A 27 40 00
Apr-02 8:49:50 PM EZFlora Debug Entered HSEvent GENERIC Case
Apr-02 8:49:50 PM EZFlora Debug Entered SetIOMulti() subroutine.
Apr-02 8:49:50 PM Device Control Device: Irrigation Valve 1 to On (100) by/from: CAPI Control Handler
First entry on the bottom is where I hit On. Same for all of the valves.
Thanks
Chris
Apr-02 8:49:50 PM EZFlora Debug HSEvent GENERIC Case: Parms = ACK 40 00 01 19 BE 07 1E DB 1A 27 40 00
Apr-02 8:49:50 PM EZFlora Debug Entered HSEvent GENERIC Case
Apr-02 8:49:50 PM EZFlora Info EZFlora 19.BE.07 all programs off
Apr-02 8:49:50 PM EZFlora Debug Entered ProcessProgramsOff() subroutine.
Apr-02 8:49:50 PM EZFlora Info EZFlora 19.BE.07 all valves off
Apr-02 8:49:50 PM EZFlora Debug Entered ProcessValvesOff() subroutine.
Apr-02 8:49:50 PM EZFlora Debug HSEvent GENERIC Case: Parms = 01 19 BE 07 1E DB 1A 27 40 00
Apr-02 8:49:50 PM EZFlora Debug Entered HSEvent GENERIC Case
Apr-02 8:49:50 PM EZFlora Debug Entered SetIOMulti() subroutine.
Apr-02 8:49:50 PM Device Control Device: Irrigation Valve 1 to On (100) by/from: CAPI Control Handler
First entry on the bottom is where I hit On. Same for all of the valves.
Thanks
Chris
Comment