I am currently testing the Russound Plug in and ran into an issue. I can not get the HS software to control my Russound system. I troubleshooted to the point of using the software program Docklight to send the HEX value of turning on a zone on my Russound system that HS could not. The HEX code that HS shows in the logs works by copying and pasting into Docklight but not if HS tries.
This leaves me to believe something is missing in HS to properly communicate with my Russound System.
I can't see in the logs where HS is using com4 to communicate. I have changed com port types and restarted the pc between setting changes to make sure the setting take effect.
this is the com port settings in device manger.
Comport 4
Bits per second =19200
data bits =8
parity=none
stop bits=1
flow control=none
BLrussound options in HS
russound com port =com4
comport control type =homeseer
Attached is the Russound debug log from strartup.
Using pc with windows 10 with 2gb memory
This leaves me to believe something is missing in HS to properly communicate with my Russound System.
I can't see in the logs where HS is using com4 to communicate. I have changed com port types and restarted the pc between setting changes to make sure the setting take effect.
this is the com port settings in device manger.
Comport 4
Bits per second =19200
data bits =8
parity=none
stop bits=1
flow control=none
BLrussound options in HS
russound com port =com4
comport control type =homeseer
Attached is the Russound debug log from strartup.
Using pc with windows 10 with 2gb memory
Comment