www.homeseer.com    
 

Go Back   HomeSeer Message Board > 3rd Party Plug-Ins/Scripts > Plug-ins by Author > Click Here for List of Author Forums > Ultra Scripts and Plug-Ins > UltraPioneerAVR HSPI

UltraPioneerAVR HSPI Discussion area for the UltraPioneerAVR HSPI supporting the Pioneer AVR Receivers.

Reply
 
Thread Tools Display Modes
  #61  
Old March 21st, 2015, 09:21 AM
Ultrajones's Avatar
Ultrajones Ultrajones is offline
OverSeer
 
Join Date: Jan 2001
Location: Michigan, US
Posts: 5,758
Quote:
Originally Posted by sparkman View Post
Hi Randy, I can test it. I've sent you am email as well.

Cheers
Al
Hello Al, let's try this:

1) Connect you receiver to your local network and ensure its powered off.
2) Install the UltraPioneerAVR3 plug-in from the HomeSeer updater, then enable it.
3) From the Receivers tab, confirm the receiver is discovered and the model number is VSX-1124.
4) Now update the model number from VXS-1124 to VSX-1123, then restart the plug-in.
5) From the Receivers tab, confirm the receiver model number is still VSX-1123.
6) Power on the receiver and watch the logs to determine if it detected the powered on stated.
7) Wait about 1 minute, then visit the AVR Devices web page to determine what was detected.

At this point, everything under Master Controls, Zone2 Controls, Zone4 Controls, Channel Level, Audio Information, Video Information, Video Function, DSP Function, AMP Function, Tuner Function and Misc Function should have values. If not, try manually putting on a video source and an audio source so those value populate.

If it appears to be working at this point, then try creating devices and controlling your receiver with the HS devices that gets created. You should also be able to use the remote control and change input, volume etc. and you should see those changes reflected in the HS devices that get created.

Please report back if that works. If not, we will try plan b.

Regards,
Ultrajones
__________________
Plug-ins: UltraMon, UltraM1G, UltraCID, Ultra1Wire, UltraLog, UltraWeatherBug, UltraPioneerAVR, UltraGCIR

Last edited by Ultrajones; March 21st, 2015 at 11:26 AM.
Reply With Quote
  #62  
Old March 21st, 2015, 10:45 AM
sparkman's Avatar
sparkman sparkman is offline
OverSeer
 
Join Date: Oct 2001
Location: Calgary, Alberta, Canada
Posts: 6,001
Hi Randy,

All seems to work doing that, except for step 5, the receiver model number stays at VSX-1123.

I do see some warnings in the log (each repeated 4 times):

Code:
Mar-21 8:40:14 AM	 	Warning	No response/improper response from Pioneer AVR device '192.168.1.206:23' to command '?ZEP'. Your Pioneer AVR may not support the feature 'Zone3 Power'.
Mar-21 8:40:05 AM	 	Warning	No response/improper response from Pioneer AVR device '192.168.1.206:23' to command '?RGB03'. Your Pioneer AVR may not support the feature 'Input Name Information'.
I'm assuming those are a normal part of the discovery process.

Thanks
Al
__________________
HS3Pro 3.0.0.318 on Jetway JBC501F9Q-Q87-B i7 8GB 1874 Devices, 955 Events, 28 Plugins
Z-Wave 3.0.1.131 Z-Net 105 nodes:Leviton Vizia,Kwikset,FortrezZ Valve/Sensors,Everspring Sensors/Modules/Outlets,CT30 Stats,MIMOLites,Aeotec Smart Switches
RFXCom W800,RFXrec433,RFXtrx433|APCUPSD|Pushover|Squeezebox|weatherXML|HS Phone W2C|APCUPSD|UltraLog
UltraGCIR GC-100|UltraNetcam|UltraPioneer|Ultra1Wire|DSC PC1832|BLLED|BLTVGuide|ImperiHome|jon00 Utilities|MySensors

PHLocation|X10 CM11A IOLinc,etc
Reply With Quote
  #63  
Old March 21st, 2015, 11:27 AM
Ultrajones's Avatar
Ultrajones Ultrajones is offline
OverSeer
 
Join Date: Jan 2001
Location: Michigan, US
Posts: 5,758
Quote:
Originally Posted by sparkman View Post
Hi Randy,

All seems to work doing that, except for step 5, the receiver model number stays at VSX-1123.

I do see some warnings in the log (each repeated 4 times):

Code:
Mar-21 8:40:14 AM	 	Warning	No response/improper response from Pioneer AVR device '192.168.1.206:23' to command '?ZEP'. Your Pioneer AVR may not support the feature 'Zone3 Power'.
Mar-21 8:40:05 AM	 	Warning	No response/improper response from Pioneer AVR device '192.168.1.206:23' to command '?RGB03'. Your Pioneer AVR may not support the feature 'Input Name Information'.
I'm assuming those are a normal part of the discovery process.

Thanks
Al
Sorry, item #5 was a typo. I fixed it. Yes, those 2 "No response" warnings are normal for your receiver. You can disable it from the AVR Devices tab so they don't get checked again.

I'll post an update soon that adds support for the VSX-1124 model so you don't have to manually change the type from VSX-1124 to VSX-1123.

Regards,
Ultrajones
Reply With Quote
  #64  
Old March 21st, 2015, 11:54 AM
sparkman's Avatar
sparkman sparkman is offline
OverSeer
 
Join Date: Oct 2001
Location: Calgary, Alberta, Canada
Posts: 6,001
Quote:
Originally Posted by Ultrajones View Post
Sorry, item #5 was a typo. I fixed it. Yes, those 2 "No response" warnings are normal for your receiver. You can disable it from the AVR Devices tab so they don't get checked again.

I'll post an update soon that adds support for the VSX-1124 model so you don't have to manually change the type from VSX-1124 to VSX-1123.

Regards,
Ultrajones
Thanks Randy!

Cheers
Al
Reply With Quote
  #65  
Old March 25th, 2015, 10:40 AM
jlrichar's Avatar
jlrichar jlrichar is offline
Seer Master
 
Join Date: Jan 2006
Posts: 1,150
New receivers announced!
http://www.soundandvision.com/conten...equipped-av-rs
__________________
_______________________________________________

HS3 : HSpro (3.0.0.318) on Win2012 (vm on ESXi)
Plugins: HSTouch, UPBSpud, Kinect, Nest, IFTTT, DirecTV, EasyTrigger, Imperihome, Zwave, RFXcom, UltraMon3, UltraWeatherBug3, UltraGCIR3, UltraLog3, UltraPioneer, PHLocation, Pushover, Pushalot, MCSSPrinklers S, JowiHue
Jon00 Plugins: Bluetooth Proximity, Performance Monitor, DB Chart, Links
Reply With Quote
  #66  
Old April 25th, 2015, 05:46 PM
johnnybwis's Avatar
johnnybwis johnnybwis is offline
Seer Master
 
Join Date: Jul 2003
Location: Wisconsins, East Coast
Posts: 731
Ultrajones,
My vsx 1121 just turned into a paper weight. So I need to get something pretty soon and am considering the vsx 1124. But I also see the new model coming out which is a vsx 1130. Pricing that I've seen seems pretty close to the same on both models so of course I would rather go with the newer version. Or is that too risky because it might not work with this plugin?
__________________
John
Reply With Quote
  #67  
Old May 24th, 2015, 05:52 PM
Leoleo's Avatar
Leoleo Leoleo is offline
Seer
 
Join Date: Dec 2011
Location: Fountain Valley
Posts: 56
VSX-1130-K ?

Gurus,

My amp just went belly up and I'm looking for a replacement. I like the VSX-1123-K since it was recommended as a decent amp fully vetted with HS. I ran into the VSX-1130-K which seems similar but has Bluetooth which seems an advantage. Does the VSX-1130-K work with the UltraPioneer plugin? I looked all over and didn't see it listed specifically.


Thanks in advance,

Leo
Reply With Quote
  #68  
Old May 25th, 2015, 10:00 AM
Ultrajones's Avatar
Ultrajones Ultrajones is offline
OverSeer
 
Join Date: Jan 2001
Location: Michigan, US
Posts: 5,758
Yes, it should work with the plug-in with a simple work-around (http://board.homeseer.com/showpost.p...7&postcount=61). However, I am updating the plug-in to officially support the 2015 receivers. I'll be posting an update when done.

Regards,
Ultrajones
Reply With Quote
  #69  
Old July 2nd, 2015, 12:17 PM
dcdelong's Avatar
dcdelong dcdelong is offline
Seer Deluxe
 
Join Date: Oct 2011
Location: Indiana\Ohio
Posts: 304
Quote:
Originally Posted by Ultrajones View Post
Yes, it should work with the plug-in with a simple work-around (http://board.homeseer.com/showpost.p...7&postcount=61). However, I am updating the plug-in to officially support the 2015 receivers. I'll be posting an update when done
Just ordered a VSX-1130-k for delivery this week-end. Planning on using the work around. Will that cause any issues when the plug-in formally supports the 2015 models? If so I can wait a bit to bring it into the mix.

Chris
__________________
HSPRO3 3.0.0.368 on HP 8000, 9 SONOS, Vista p20 alarm, 3 IPads and HP Touch Screen, 22 z-Wave, 54 INSTEON

Plugins :BLBackup:,Pushover 3P:,Wiimote:Winery,HSTV:,Insteon:,PHLocation:,drhsIpPlugIn:, UltraNetatmoWelcome3:,UltraSighthoundVideo3:,Vista Alarm:,UltraCID3:,Random:,EasyTrigger:,iAutomate RFID:,FitbitSeer:,Z-Wave:,HSTouch Server:,weatherXML:,Sonos:,Restart:,UltraGCIR3:,UltraPioneer AVR3:JowiHue;WiiMote;MyQ
Reply With Quote
  #70  
Old July 2nd, 2015, 12:43 PM
Ultrajones's Avatar
Ultrajones Ultrajones is offline
OverSeer
 
Join Date: Jan 2001
Location: Michigan, US
Posts: 5,758
Quote:
Originally Posted by dcdelong View Post
Just ordered a VSX-1130-k for delivery this week-end. Planning on using the work around. Will that cause any issues when the plug-in formally supports the 2015 models? If so I can wait a bit to bring it into the mix.

Chris
The version I released yesterday adds basic support for the 2014 and 2015 models. I am still going though the documentation to see what other new options I'll be adding to the plug-in.

Regards,
Ultrajones
Reply With Quote
  #71  
Old July 21st, 2015, 06:59 AM
Stones Stones is offline
Seer
 
Join Date: Dec 2006
Location: Denmark
Posts: 24
Europe

Dear UltraJones

I´m about to invest in 4 Pioneers receivers.

I do not like Sonos and your plugin is for me a much better solution all over.
I will use the HDMI in/out connection from Pioneer for my Samsung 2015 televisions.
I will use the Airplay function for announcement and music.

In 3 rooms i don´t actually need cinema 5.1 sound but i can live with a receiver of that kind to achieve the functionality your plugin gives me other places.

The 4. room is my master bedroom and it would be nice with a little bigger workhorse.

The models we have in europe is probably kind of the same as in US but with difference model numbers.

I would like to buy new models from 2015 for this project.

Are you close with a list of models for 2015 or is there a way where I can ordre the receiver and be confident that it can be controlled by your plugin at a later state.
Ex. the rs-232 protocol or other things I can read in the spec.

I hope you can guide me in this.

Stones
Reply With Quote
  #72  
Old November 30th, 2015, 11:20 AM
morrisdlx's Avatar
morrisdlx morrisdlx is offline
Seer
 
Join Date: May 2015
Location: USA
Posts: 68
Initial setup – huge learning curve

Hi, I am in my initial setup of all AV and home automation. I have a Homeseer S6 PRO and a Pioneer VSX-1130K. I have downloaded the UltaPioneerAV3 plugin to test before buying. I followed the recommended install steps listed at http://board.homeseer.com/showpost.p...7&postcount=61. Everything seemed to go well and after installation I have a large list of devices grouped under PAVR1 Master Controls and PAVR1 Channel Level.

As recommended I then tried to create events using the listed devices.

PROBLEM: The only devices that would respond to the events I created were Power on/off, and Mute.

Please advise, is there an additional step I am missing or a configuration change I missed?

Thank you
Reply With Quote
  #73  
Old November 30th, 2015, 09:41 PM
Ultrajones's Avatar
Ultrajones Ultrajones is offline
OverSeer
 
Join Date: Jan 2001
Location: Michigan, US
Posts: 5,758
Quote:
Originally Posted by morrisdlx View Post
Hi, I am in my initial setup of all AV and home automation. I have a Homeseer S6 PRO and a Pioneer VSX-1130K. I have downloaded the UltaPioneerAV3 plugin to test before buying. I followed the recommended install steps listed at http://board.homeseer.com/showpost.p...7&postcount=61. Everything seemed to go well and after installation I have a large list of devices grouped under PAVR1 Master Controls and PAVR1 Channel Level.

As recommended I then tried to create events using the listed devices.

PROBLEM: The only devices that would respond to the events I created were Power on/off, and Mute.

Please advise, is there an additional step I am missing or a configuration change I missed?

Thank you
Hello, I assume the receiver is turned on when you're trying to control the receiver. Can you tell me if you're able to manually control the receiver using the HomeSeer devices that were created? Is there anything written to the HomeSeer log?

Regards,
Ultrajones
Reply With Quote
  #74  
Old December 10th, 2015, 12:29 AM
morrisdlx's Avatar
morrisdlx morrisdlx is offline
Seer
 
Join Date: May 2015
Location: USA
Posts: 68
UltraJones,

Sorry the slow response, I have been tied up with getting moved in. To you question, "Hello, I assume the receiver is turned on when you're trying to control the receiver. Can you tell me if you're able to manually control the receiver using the HomeSeer devices that were created? Is there anything written to the HomeSeer log?"

PWR and MUTE are working. I tried other devices with manually with no success. I also retried the events, and still can only get PWR and MUTE to work. I have clipped the log entries for your review. Please note, I have an email configuration that I will address.

Thank you for any help you can provide.

Morrisdlx


Dec-09 11:17:44 PM Error Unable to connect to POP server(1) pop3.live.com Error: authentication failed

Dec-09 11:16:56 PM HSTouch Server Debug 11:16:56:0150 ~ String change event, value is: 0

Dec-09 11:16:56 PM HSTouch Server Debug 11:16:56:0121 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 11:16:53 PM HSTouch Server Debug 11:16:53:6523 ~ String change event, value is: 0

Dec-09 11:16:53 PM HSTouch Server Debug 11:16:53:6503 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 11:16:22 PM HSTouch Server Debug 11:16:22:4272 ~ String change event, value is: 0

Dec-09 11:16:22 PM HSTouch Server Debug 11:16:22:4247 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 11:16:02 PM HSTouch Server Debug 11:16:02:3860 ~ String change event, value is: 0

Dec-09 11:16:02 PM HSTouch Server Debug 11:16:02:3840 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 11:10:50 PM HSTouch Server Debug 11:10:50:0460 ~ String change event, value is: 0

Dec-09 11:10:50 PM HSTouch Server Debug 11:10:50:0430 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 11:10:33 PM HSTouch Server Debug 11:10:33:1470 ~ String change event, value is: 0

Dec-09 11:10:33 PM HSTouch Server Debug 11:10:33:1445 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 11:07:42 PM Error Unable to connect to POP server(1) pop3.live.com Error: authentication failed

Dec-09 11:00:57 PM HSTouch Server Debug 11:00:57:7810 ~ String change event, value is: 0

Dec-09 11:00:57 PM HSTouch Server Debug 11:00:57:7785 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 11:00:29 PM HSTouch Server Debug 11:00:29:3157 ~ String change event, value is: 0

Dec-09 11:00:29 PM HSTouch Server Debug 11:00:29:3137 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 10:58:16 PM HSTouch Server Debug 10:58:16:6238 ~ String change event, value is: 0

Dec-09 10:58:16 PM HSTouch Server Debug 10:58:16:6208 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 10:57:58 PM HSTouch Server Debug 10:57:58:4876 ~ String change event, value is: 0

Dec-09 10:57:58 PM HSTouch Server Debug 10:57:58:4866 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 10:57:40 PM Error Unable to connect to POP server(1) pop3.live.com Error: authentication failed

Dec-09 10:57:39 PM HSTouch Server Debug 10:57:39:0574 ~ String change event, value is: 0

Dec-09 10:57:39 PM HSTouch Server Debug 10:57:39:0544 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 10:57:10 PM HSTouch Server Debug 10:57:10:3830 ~ String change event, value is: 0

Dec-09 10:57:10 PM HSTouch Server Debug 10:57:10:3800 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 10:53:21 PM HSTouch Server Debug 10:53:21:9663 ~ Value change ref:69 Address:PAVR1_main-mute NewVal: 1OldVal: 0

Dec-09 10:53:18 PM HSTouch Server Debug 10:53:18:5683 ~ Value change ref:69 Address:PAVR1_main-mute NewVal: 0OldVal: 1

Dec-09 10:52:13 PM HSTouch Server Debug 10:52:13:0556 ~ String change event, value is: 0

Dec-09 10:52:13 PM HSTouch Server Debug 10:52:13:0526 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 10:52:12 PM HSTouch Server Debug 10:52:12:9698 ~ Value change ref:72 Address:PAVR1_listening-mode-setting NewVal: 5OldVal: 50

Dec-09 10:49:28 PM Event Event Trigger "Manage AV Vol-Down"

Dec-09 10:49:28 PM Event Event Manage AV Vol-Down triggered by the event page 'Run' button.

Dec-09 10:49:27 PM Event Event Trigger "Manage AV Vol-Down"

Dec-09 10:49:27 PM Event Event Manage AV Vol-Down triggered by the event page 'Run' button.

Dec-09 10:49:24 PM Event Event Trigger "Manage AV Vol-Up"

Dec-09 10:49:24 PM Event Event Manage AV Vol-Up triggered by the event page 'Run' button.

Dec-09 10:49:22 PM Event Event Trigger "Manage AV Vol-Up"

Dec-09 10:49:22 PM Event Event Manage AV Vol-Up triggered by the event page 'Run' button.
Reply With Quote
  #75  
Old December 10th, 2015, 07:48 AM
karlito karlito is offline
Seer
 
Join Date: Jan 2009
Location: ashkelon
Posts: 17
hello

i want use this plugin but it writes me :

warning : failed getting interfacestatus from ultrapioneer avr3 - the interface was not found in the list of active interfaces , the list may need to be refreshed.

i dont understand why ?

i uninstalled the installed but not works
Reply With Quote
  #76  
Old December 13th, 2015, 11:07 AM
Ultrajones's Avatar
Ultrajones Ultrajones is offline
OverSeer
 
Join Date: Jan 2001
Location: Michigan, US
Posts: 5,758
Quote:
Originally Posted by morrisdlx View Post
UltraJones,

Sorry the slow response, I have been tied up with getting moved in. To you question, "Hello, I assume the receiver is turned on when you're trying to control the receiver. Can you tell me if you're able to manually control the receiver using the HomeSeer devices that were created? Is there anything written to the HomeSeer log?"

PWR and MUTE are working. I tried other devices with manually with no success. I also retried the events, and still can only get PWR and MUTE to work. I have clipped the log entries for your review. Please note, I have an email configuration that I will address.

Thank you for any help you can provide.

Morrisdlx


Dec-09 11:17:44 PM Error Unable to connect to POP server(1) pop3.live.com Error: authentication failed

Dec-09 11:16:56 PM HSTouch Server Debug 11:16:56:0150 ~ String change event, value is: 0

Dec-09 11:16:56 PM HSTouch Server Debug 11:16:56:0121 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 11:16:53 PM HSTouch Server Debug 11:16:53:6523 ~ String change event, value is: 0

Dec-09 11:16:53 PM HSTouch Server Debug 11:16:53:6503 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 11:16:22 PM HSTouch Server Debug 11:16:22:4272 ~ String change event, value is: 0

Dec-09 11:16:22 PM HSTouch Server Debug 11:16:22:4247 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 11:16:02 PM HSTouch Server Debug 11:16:02:3860 ~ String change event, value is: 0

Dec-09 11:16:02 PM HSTouch Server Debug 11:16:02:3840 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 11:10:50 PM HSTouch Server Debug 11:10:50:0460 ~ String change event, value is: 0

Dec-09 11:10:50 PM HSTouch Server Debug 11:10:50:0430 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 11:10:33 PM HSTouch Server Debug 11:10:33:1470 ~ String change event, value is: 0

Dec-09 11:10:33 PM HSTouch Server Debug 11:10:33:1445 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 11:07:42 PM Error Unable to connect to POP server(1) pop3.live.com Error: authentication failed

Dec-09 11:00:57 PM HSTouch Server Debug 11:00:57:7810 ~ String change event, value is: 0

Dec-09 11:00:57 PM HSTouch Server Debug 11:00:57:7785 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 11:00:29 PM HSTouch Server Debug 11:00:29:3157 ~ String change event, value is: 0

Dec-09 11:00:29 PM HSTouch Server Debug 11:00:29:3137 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 10:58:16 PM HSTouch Server Debug 10:58:16:6238 ~ String change event, value is: 0

Dec-09 10:58:16 PM HSTouch Server Debug 10:58:16:6208 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 10:57:58 PM HSTouch Server Debug 10:57:58:4876 ~ String change event, value is: 0

Dec-09 10:57:58 PM HSTouch Server Debug 10:57:58:4866 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 10:57:40 PM Error Unable to connect to POP server(1) pop3.live.com Error: authentication failed

Dec-09 10:57:39 PM HSTouch Server Debug 10:57:39:0574 ~ String change event, value is: 0

Dec-09 10:57:39 PM HSTouch Server Debug 10:57:39:0544 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 10:57:10 PM HSTouch Server Debug 10:57:10:3830 ~ String change event, value is: 0

Dec-09 10:57:10 PM HSTouch Server Debug 10:57:10:3800 ~ String change event for PAVR1_listening-mode to string:STEREO

Dec-09 10:53:21 PM HSTouch Server Debug 10:53:21:9663 ~ Value change ref:69 Address:PAVR1_main-mute NewVal: 1OldVal: 0

Dec-09 10:53:18 PM HSTouch Server Debug 10:53:18:5683 ~ Value change ref:69 Address:PAVR1_main-mute NewVal: 0OldVal: 1

Dec-09 10:52:13 PM HSTouch Server Debug 10:52:13:0556 ~ String change event, value is: 0

Dec-09 10:52:13 PM HSTouch Server Debug 10:52:13:0526 ~ String change event for PAVR1_listening-mode to string:AUTO SURROUND Straight Decode

Dec-09 10:52:12 PM HSTouch Server Debug 10:52:12:9698 ~ Value change ref:72 Address:PAVR1_listening-mode-setting NewVal: 5OldVal: 50

Dec-09 10:49:28 PM Event Event Trigger "Manage AV Vol-Down"

Dec-09 10:49:28 PM Event Event Manage AV Vol-Down triggered by the event page 'Run' button.

Dec-09 10:49:27 PM Event Event Trigger "Manage AV Vol-Down"

Dec-09 10:49:27 PM Event Event Manage AV Vol-Down triggered by the event page 'Run' button.

Dec-09 10:49:24 PM Event Event Trigger "Manage AV Vol-Up"

Dec-09 10:49:24 PM Event Event Manage AV Vol-Up triggered by the event page 'Run' button.

Dec-09 10:49:22 PM Event Event Trigger "Manage AV Vol-Up"

Dec-09 10:49:22 PM Event Event Manage AV Vol-Up triggered by the event page 'Run' button.
I am not seeing any output from my plug-in in the log data you provided.

Regards,
ultrajones
Reply With Quote
  #77  
Old December 13th, 2015, 11:10 AM
Ultrajones's Avatar
Ultrajones Ultrajones is offline
OverSeer
 
Join Date: Jan 2001
Location: Michigan, US
Posts: 5,758
Quote:
Originally Posted by karlito View Post
hello

i want use this plugin but it writes me :

warning : failed getting interfacestatus from ultrapioneer avr3 - the interface was not found in the list of active interfaces , the list may need to be refreshed.

i dont understand why ?

i uninstalled the installed but not works
From PLUG-INS > Manage > Installed Plug-ins, please confirm the UltraPioneerAVR3 license section says "Trial with n days left." or "Licensed".

Regards,
Ultrajones
Reply With Quote
  #78  
Old December 19th, 2015, 06:17 PM
morrisdlx's Avatar
morrisdlx morrisdlx is offline
Seer
 
Join Date: May 2015
Location: USA
Posts: 68
Quote:
I am not seeing any output from my plug-in in the log data you provided.

Regards,
ultrajones
Ultrajones,

The above was every log entry while trying to execute pioneer devices. At this point, my trial license has expired. I would really like to be able to integrate my VSX-1130-k Pioneer receiver but, at this point I am stumped.

I have some significant network work to complete and need to work on other plugins for surveillance cameras. When this is completed, I will review the current inputs for 1130 specific installations.

Thank you for taking the time to look over my log data.

Dave

Last edited by morrisdlx; December 19th, 2015 at 06:18 PM. Reason: closing
Reply With Quote
  #79  
Old December 19th, 2015, 09:17 PM
Ultrajones's Avatar
Ultrajones Ultrajones is offline
OverSeer
 
Join Date: Jan 2001
Location: Michigan, US
Posts: 5,758
Quote:
Originally Posted by morrisdlx View Post
Ultrajones,

The above was every log entry while trying to execute pioneer devices. At this point, my trial license has expired. I would really like to be able to integrate my VSX-1130-k Pioneer receiver but, at this point I am stumped.

I have some significant network work to complete and need to work on other plugins for surveillance cameras. When this is completed, I will review the current inputs for 1130 specific installations.

Thank you for taking the time to look over my log data.

Dave
The logs you provided looks like you were trying to control the UltraPioneerAVR plug-in devices by changing the device string which won't work. You have to control the plug-in devices by changing its value.

Regards,
Ultrajones
Reply With Quote
  #80  
Old December 21st, 2015, 12:27 PM
morrisdlx's Avatar
morrisdlx morrisdlx is offline
Seer
 
Join Date: May 2015
Location: USA
Posts: 68
Quote:
Originally Posted by Ultrajones View Post
The logs you provided looks like you were trying to control the UltraPioneerAVR plug-in devices by changing the device string which won't work. You have to control the plug-in devices by changing its value.

Regards,
Ultrajones
Ultrajones,

I really want to make this work. If I can get the trail license renewed, I will send a detailed step by step information on the install, tests, and results. Is there a way to refresh the trail license and try again?

Dave
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:53 PM.


Copyright HomeSeer Technologies, LLC