Announcement

Collapse
No announcement yet.

Possible bug?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Possible bug?

    I have noticed a situation that happens.

    I have a wireless zone that has been causing me issues. A couple times a day it doesn't check in and then I get the check 20:

    Code:
         [COLOR=#000000]May-12 9:51:11 AM[/COLOR] [COLOR=#000000] [/COLOR] [COLOR=#000000]Vista Alarm[/COLOR] [COLOR=#000000]CHECK 20 MASTER BEDROOM WINDOW[/COLOR]
    Basically once this happens I am locked out of any hard wired zone triggers from working until I bypass the zone and hit *

    Code:
    May-13 12:35:23 AM	 	Vista Alarm	FAULT 14 BACK DOOR
    May-13 12:35:19 AM	 	Vista Alarm	FAULT 09 MASTER BATHROOM WINDOW
    May-13 12:35:18 AM	 	Vista Alarm	Sending Button Send command to alarm
    May-13 12:35:10 AM	 	Vista Alarm	DISARMED BYPASS Hit * for faults
    May-13 12:35:08 AM	 	Vista Alarm	0739396,00 received from Stairway Stairway IR RF
    May-13 12:35:05 AM	 	Vista Alarm	0739396,80 received from Stairway Stairway IR RF
    May-13 12:35:03 AM	 	Vista Alarm	BYPAS
    May-13 12:35:02 AM	 	Vista Alarm	Sending BypassZone command to alarm
    May-13 12:34:49 AM	 	Vista Alarm	Sending Button Send command to alarm
    May-13 12:34:49 AM	 	Vista Alarm	Sending Button Send command to alarm
    May-13 12:34:49 AM	 	Vista Alarm	Sending Button Send command to alarm
    You can see here from the logs that I bypass the zone. It then says Disarmed Bypass Hit *for faults. As soon as I press the * you see it registers that the back door and master bathroom window are open. Note: they were open from the beginning.

    I use the backdoor trigger to turn on outside lights at night and I noticed it hasn't been working. I think I figured out that when the check 20 happens, it basically locks up any events from acting on zone faults until the check 20 is cleared and the * is pressed.

    #2
    I had a similar issue. I had to replace the RF sensor.
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment


      #3
      Yeah, I am definitely going to replace the sensor, however is there way to get the triggers working no matter what? the board will still react to alarms signals so it must be sending the fault signals but the plugin not registering them

      Not sure...

      Comment


        #4
        I'm not really sure this scenario is worth the effort. but if you can post a debug log that shows the panel messages that are getting missed, I will take a look
        Mark

        HS3 Pro 4.2.19.5
        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

        Comment

        Working...
        X