www.homeseer.com    
 

Go Back   HomeSeer Message Board > Analog & Digital IO Device Plug-ins > Analog & Digital IO Discussion > Arduino Plugin (3P)

Arduino Plugin (3P) Discussions related to the Arduion plugin for HS3 by enigmatheatre

Closed Thread
 
Thread Tools Display Modes
  #1  
Old January 24th, 2016, 01:42 PM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
Arduino Plugin Beta Version Info.

This is the Beta Notes section for the Arduino Plugin by EnigmaTheatre (Greig Dempster).

There have been many changes in the plugin from V1.0.0.36 and I will try and highlight as much as I can in this post. I will also update this with information on any new Betas that are posted so people can see the changes and choose to update or not.

Click on the version number below to download the updater_override.txt

The Beta Manual can be found Here.

Main Changes from 1.0.0.36 are:

Now works with V1.6.5-r5 Arduino IDE please update the IDE and the libraries
Linux compatible with Ethernet connection only
LCD Display has been added
Debounce on the input was fixed
Fixed URL encoding on the config page.
PWM now uses Soft PWM so any pin can be used on the board.
Added Alive pin to board that triggers on board disconnect
Added Advanced Ethernet settings to allow all pins to be used.
Added Advanced comport settings to allow baud to be set
Added one wire resolution
Added one wire error value to devices
Added RGB Colour picker to device management page
Added Lots more logging
Add Pin to user notes.
Fixed international formatting
Fixed HSTouch tracking
Connect and disconnect buttons on the config page now update
Added timer for fault of one wire bus
40 inputs can now be used
Lots of other bug fixes


V1.0.0.105
Changes to threading

Now works with V1.6.8 Arduino IDE please update the IDE and the libraries

V1.0.0.107
Fix baud not being added to the INO if advanced is selected
More connection attempt fixes.
Changes to speed up config page load.

V1.0.0.108
Added Ethernet Shield V2 checkbox
Fixed logging on config missing enteries.
.ino changes
Logging changes.

V1.0.0.109
Added Reset to Config page
Added board status errors to config page
Changes to Threading
Changes to Sum on Analogue in to accept more calculations.
Change to Auto connect button in UI to stop updates on logging

V1.0.0.110

Add auto find gateway and subnet. No Linux support.
Added gateway and Subnet

V1.0.0.112
Add output Blink, flash and toggle

V1.0.0.113
Fix Analog Input Truncates to Zero Decimal Places

V1.0.0.115
Add dec place to config and fix in Analouge in

V1.0.0.116
Fixed outputs not updating to blink on startup.
work on nodemcu support.
Fixed Debounce not updating
Added API Version to config page
Fix onewire error

V1.0.0.117
Fix ino download error from V.116

V1.0.0.118
Fix config page error.
Fix boards not connecting.
Fix ino download

V1.0.0.122
Fixed sketch to fit on Uno Boards.

V1.0.0.123
Fixed max outputs to 40 not 10

V1.0.0.124
Fix API.ino mismatch error


V1.0.0.125
reduce cpu usage.
Change one wire Error update code.

V1.0.0.126
Fix Analogue input bug.

V1.0.0.129
Fix Analogue update time

V1.0.0.140
Removed old debug error message
Added Output invert

V1.0.0.140
Added RomErrorTime
Fixed false Rom errors

V1.0.0.130
Fix for HS.Event error


Now works with V1.8.1 Arduino IDE please update the IDE and the libraries

V1.0.0.132
Change max boards to 30
Change to speed up config page loading
Changed UI board selection to dropdown
fixed Auto Connect on Board 1
fix advanced ethernet not showing pins
Removed rom status graphic reset on restart.
changed send command to stop calling Homeseer on every send as data is now stored in the plugin.

V1.0.0.133
Fixed one wire Exception
Fixed logging not showing in HS Log.
RecievedData changed to use new Arrays for speed
Changed config drop list to not include location or type
Added NodeMCU inputs

V1.0.0.134
Fix for connection Error in isconnected function
Added NodeMcu LCD
Fixed LCD Delete
Added LCD Address

V1.0.0.135
Fix IsConnected exception

V1.0.0.136
Fixed Bug when changing from IP to Com
Added NodeMcu support
Fix sending doubles in API Sketch
Fix Sketch Download error

V1.0.0.138
Fix for API input Decimal seperator in some locations.
Fixed Error adding Pin D3 as Alive pin to NodeMcu
Added LCD Address Warning

V1.0.0.139
Anohter Fix for API input Decimal separator in some locations.

V1.0.0.140
Add NodeMCU API
Fixed Errors not showing on config page

V1.0.0.141
Fixed Sketch Download not updating values

V1.0.0.142
Added Try to Auto reset on board error.
Added Board reconnect every 3min on connection fail.
Fix Analog setup showing with no analog pins in use
Fix API not updating the SSID and password

V1.0.0.143
Fixed false Rom error timeout
Added Do Not Update on startup to output devices to stop value reset.
Fix LCD Update slowdown

In Sketch:
Added LCD Status Messages
Added code to hide SSID
Added OTA update to NodeMCU. API to follow.
Added OTA Status to LCD

V1.0.0.144
In Sketch:
Fixed auto reset on board
Fix alive pin not showing some disconnects

V1.0.0.145
In Sketch:
Fix Output blink > 9 not working
Fixed bug in output One Flash
Removed unwanted Linux Debug code

V1.0.0.146
Added OTA Update to API NodeMCU
Added code to hide SSID on NodeMCU in API sketch

V1.0.0.147
Fixed one wire not updating.

Greig.
__________________
Zwave = Z-Stick, 3xHSM100™ 7xACT ZDM230, 1xEverspring SM103, 2xACT HomePro ZRP210.
X10 = CM12U, 2xAM12, 1xAW10, 1 x TM13U, 1xMS13, 2xHR10, 2xSS13
Other Hardware = ADI Ocelot + secu16, Global Cache GC100, RFXtrx433, 3 x Foscams.
Plugings = RFXcom, ActiveBackup, Applied Digital Ocelot, BLDeviceMatrix, BLGarbage, BLLAN, Current Cost, Global Cache GC100,HSTouch Android, HSTouch Server, HSTouch Server Unlimited, NetCAM, PowerTrigger, SageWebcamXP, SqueezeBox, X10 CM11A/CM12U.
Scripts =
Various

Last edited by enigmatheatre; December 29th, 2017 at 06:13 PM.
  #2  
Old July 12th, 2016, 11:33 AM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
12/7/16

V1.0.0.112
Add output Blink, flash and toggle
  #3  
Old July 12th, 2016, 01:21 PM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
V1.0.0.113
Fix Analog Input Truncates to Zero Decimal Places
  #4  
Old July 23rd, 2016, 08:02 AM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
V1.0.0.116
Fixed outputs not updating to blink on startup.
work on nodemcu support.
Fixed Debounce not updating
Added API Version to config page
Fix onewire error

With V1.0.0.118 I will be looking at the connection problems people are having with the last Beta update.

Last edited by enigmatheatre; July 23rd, 2016 at 11:46 AM.
  #5  
Old July 23rd, 2016, 11:46 AM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
V1.0.0.117
Fix ino download error from V.116
  #6  
Old July 31st, 2016, 03:52 PM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
V1.0.0.118
Fix config page error.
Fix boards not connecting.
Fix ino download
  #7  
Old August 28th, 2016, 05:21 PM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
V1.0.0.122
Fixed sketch to fit on Uno Boards.

This should remove the board crash causing connection errors on the Uno.
  #8  
Old October 13th, 2016, 01:10 PM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
V1.0.0.126
Fix Analogue input bug.
Attempt to Reduce cpu usage.
Change one wire Error update code.
  #9  
Old October 23rd, 2016, 12:10 PM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
V1.0.0.128
Removed old debug error message
Added Output invert
  #10  
Old October 29th, 2016, 10:38 AM
enigmatheatre's Avatar
enigmatheatre enigmatheatre is online now
Super Seer
 
Join Date: Oct 2009
Location: Aberdeen Scotland UK
Posts: 1,815
V1.0.0.129
Added RomErrorTime
Fixed false Rom errors
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Arduino Plugin For Linux (Beta) enigmatheatre Arduino Plugin (3P) 41 March 20th, 2018 11:59 AM
Raspberry PI that works with the Arduino Plugin is in beta. Jakob.Sand Arduino Plugin (3P) 11 August 9th, 2016 06:01 PM
Arduino Plugin Version 1.0.0.110 Analog Input Truncates to Zero Decimal Places bdraper Arduino Plugin (3P) 11 July 16th, 2016 09:34 AM
RFXCOM plugin beta version 30.0.0.28 b_weijenberg RFXCOM Plug-In (3P) 13 May 10th, 2015 10:31 AM
SimpleHomeNet Plugin Version 1.0.1.1 Beta hurry4it SimpleHomeNet Plug-in 21 September 9th, 2013 10:02 AM


All times are GMT -4. The time now is 03:26 PM.


Copyright HomeSeer Technologies, LLC