Discussions related to HS3 build 3.0.0.425

[mikee123]

It does not honor the conditions. You will have to have it run an event that runs another event with conditions turned on.

Ok thats what I thought. But then I could leave the conditions in, and the event would then trigger either via the Alexa voice command or via the conditions.

[Malosa]

wow just when i left a message that this version is great i get an error lol
i was running 425 for almost a week...

afther these errors homeseer crashes..
but what is the ip of the remote server ?

the only thing i did is flush my iptable because i blocked a wrong ip...

13-04-2018 16:29:24
Unable to connect to the remote server
HomeSeer version: 3.0.0.425
Source: System
Target: System.Net.WebResponse EndGetResponse(System.IAsyncResult)
Stack trace: 
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at DDay.iCal.iCalendar.<>c__DisplayClass1.<LoadFromUri>b__0(IAsyncResult result)
   at System.Net.LazyAsyncResult.Complete(IntPtr userToken)
   at System.Net.ContextAwareResult.CompleteCallback(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.ContextAwareResult.Complete(IntPtr userToken)
   at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
   at System.Net.HttpWebRequest.SetResponse(Exception E)
   at System.Net.HttpWebRequest.SetAndOrProcessResponse(Object responseOrException)
   at System.Net.ConnectionReturnResult.SetResponses(ConnectionReturnResult returnResult)
   at System.Net.Connection.CompleteConnectionWrapper(Object request, Object state)
   at System.Net.PooledStream.ConnectionCallback(Object owningObject, Exception e, Socket socket, IPAddress address)
   at System.Net.ServicePoint.ConnectSocketCallback(IAsyncResult asyncResult)
   at System.Net.LazyAsyncResult.Complete(IntPtr userToken)
   at System.Net.ContextAwareResult.Complete(IntPtr userToken)
   at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
   at System.Net.Sockets.Socket.ConnectCallback()
   at System.Net.Sockets.Socket.RegisteredWaitCallback(Object state, Boolean timedOut)
   at System.Threading._ThreadPoolWaitOrTimerCallback.PerformWaitOrTimerCallback(Object state, Boolean timedOut)

Please specify what you were doing at the time of this error:

Problem signature:
  Problem Event Name:	CLR20r3
  Problem Signature 01:	HS3.exe
  Problem Signature 02:	3.0.0.425
  Problem Signature 03:	5ace2b62
  Problem Signature 04:	System
  Problem Signature 05:	4.7.2053.0
  Problem Signature 06:	58fa6cf0
  Problem Signature 07:	2037
  Problem Signature 08:	158
  Problem Signature 09:	System.Net.WebException
  OS Version:	6.1.7601.2.1.0.256.1
  Locale ID:	1033
  Additional Information 1:	0a9e
  Additional Information 2:	0a9e372d3b4ad19135b953a78882e789
  Additional Information 3:	0a9e
  Additional Information 4:	0a9e372d3b4ad19135b953a78882e789

[Malosa]

i found the error, if one of regular scripts need to access a blocked server homeseer crashes..

so when i unblock it and run that script nothing happens but when i block that ip and run that script homeseer crashes

this is the ip, its from the google calendar script..
216.58.212.206

i don't know if it has something to do with my script.. or with homeseer..
i just found it out because i blocked the wrong ip.

regards

[jon00]

.425 crashed again this afternoon. Back on .422 now.

Faulting application name: HS3.exe, version: 3.0.0.425, time stamp: 0x5ace2b62
Faulting module name: clr.dll, version: 4.7.2633.0, time stamp: 0x5a4ed482
Exception code: 0xc00000fd
Fault offset: 0x000176a8
Faulting process ID: 0x4118
Faulting application start time: 0x01d3d27ca4df954e
Faulting application path: D:\Program Files (x86)\HomeSeer HS3\HS3.exe
Faulting module path: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Report ID: 2c6c2cc8-2aee-4d20-bfeb-213ae33576ca
Faulting package full name:
Faulting package-relative application ID:

Same here. Been running .422 since it came out with no issues. Updated to 425 and within 3 hours HS3 had crashed:

Faulting application name: HS3.exe, version: 3.0.0.425, time stamp: 0x5ace2b62
Faulting module name: clr.dll, version: 4.7.2633.0, time stamp: 0x5a4ed482
Exception code: 0xc00000fd
Fault offset: 0x000176a8
Faulting process ID: 0x4118
Faulting application start time: 0x01d3d27ca4df954e
Faulting application path: D:\Program Files (x86)\HomeSeer HS3\HS3.exe
Faulting module path: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Report ID: 2c6c2cc8-2aee-4d20-bfeb-213ae33576ca
Faulting package full name:
Faulting package-relative application ID:

[AutomatedJim]

Windows or Linux Issues?

Curious, are the issues mostly Windows installs or Linux?

Was going to upgrade from 3.68 to 4.25 but after seeing all the issues from this thread, rethinking. I am on Linux.

[Pete]

Here running Ubuntu Linux 16.04 / 64 bit HSPro / HSLite with the upgrade to V4.25 with no issues right now. Well one day.

[AutomatedJim]

FYI - Links on the download page are not updated. Still on 3.68.

[Eman]

+1 here never had any problems. HSSentry always enabled!

The only item I have sucking resources is Blue Iris but even that not causing any issues




Eman.





HomeSeer Version: HS3 Pro Edition 3.0.0.425
Operating System: Microsoft Windows Server 2012 R2 Essentials - Domain Controller

[randy]

Well...

It bit me also, twice today.

4:20PM
Faulting application name: HS3.exe, version: 3.0.0.425, time stamp: 0x5ac4e16b
Faulting module name: clr.dll, version: 4.7.2600.0, time stamp: 0x59d78b0a
Exception code: 0xc00000fd
Fault offset: 0x00017698
Faulting process id: 0x2f74
Faulting application start time: 0x01d3d366e04fff02
Faulting application path: C:\Program Files (x86)\HomeSeer HS3\HS3.exe
Faulting module path: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Report Id: 6ec9f353-9161-4713-a78e-f6762a577f5c
Faulting package full name:
Faulting package-relative application ID:

10:30AM
Faulting application name: HS3.exe, version: 3.0.0.425, time stamp: 0x5ac4e16b
Faulting module name: clr.dll, version: 4.7.2600.0, time stamp: 0x59d78b0a
Exception code: 0xc00000fd
Fault offset: 0x001326d2
Faulting process id: 0x2e48
Faulting application start time: 0x01d3d2d5a4b6d7cf
Faulting application path: C:\Program Files (x86)\HomeSeer HS3\HS3.exe
Faulting module path: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Report Id: 5c4dcc7c-09dd-4333-99aa-b62b0e0113e8
Faulting package full name:
Faulting package-relative application ID:

For now, back to .423

[bdickhaus]

I just tried .425 on my RPi3 system. Same result. I started it by manually running the go script, to see what happened. Most of the plugins were initialized, and things looked like they were going to be OK. But then I got multiple (many hundreds at least) of the "Dropping event callbacks due to full queue" message. Eventually it crashed with a long list of null pointer exceptions and other errors. I tried it twice. No error messages or other strange happenings prior to the first "Dropping event" message.

So my two Linux systems are failing just after startup. One is Stretch on an RPi3, the other is Ubuntu 16.04 on a rock64. Both running the latest mono (5.10.1.20).

.423 has been rock solid for me since it was released, on both systems.

Bill

[racerfern]

.425 just crashed for the third time but now has started and is up and running with HS Sentry starting it back up each time. It might have something with a new event I'm trying, but I'll post about that later.

In the meantime, knowing nothing about where to gather info, where do I find what caused the crash? Upon restart, I can only view the log back to the last restart.

[Stuart]

So I'm on ver 425 and have not had any crashes, However, Hstouch Designer 3.0.52 starts loading and stops at getting RSS data and thats all she wrote. I cannot get it to run at all. I'm not sure where or when this happened in reference to the different build numbers.

Stuart

[Pete]

Here using HSTouch Designer V 3.0.49 (never updated) and it is working fine with V.425 of HS3 Pro / 15 in house on lan only Windows HSTouch clients (no Android clients). (or clients via VPN only).

It is running the ZWave current beta (3.0.1.210) via a ZNet like connection to an RPi2 (recently upgraded to Stretch).

Pushing a bit on the ZNet like (RPi2 - ZWave dot me GPIO) device as it is doing OWFS, NOAA Satellite downloads, Node Red and MQTT these days.

HTop shows that I am getting close to 1Gb (753M) of memory utilization here on the HS3 Lite box running in Ubuntu 16.04 64 bit with 2Gb of RAM.

There are no HS3 clients currently connected to this box. I may move one or two over to it.

[ATTACH]68162[/ATTACH]

[mrhappy]

Could this issue please be looked at - https://forums.homeseer.com/showpost...postcount=1217

The RGB colour picker in an event seems to not be working with an example script there to verify it.

[mrhappy]

Another bug I have found is that if you have a plugin that does not register a config link and then you connect that plugin remotely the plugin name does not appear in the interfaces page (it is blank, launching locally works just fine). The sample plugin HSPI_SAMPLE_BASIC can mimic this effect whereas HSPI_SAMPLE works OK because it registers a config link.