Hello Ultrajones,
running HS 2.5.0.1, iTach WF2IR firmware 710-1001-02.
Today, I got the following error messages:
26/01/2011 09:58:20 - UltraGCIR Warning - Watchdog Timer reconnect attempt failed.
26/01/2011 09:58:20 - UltraGCIR Error - Ethernet connection could not be made to 192.168.2.54:4998 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.2.54:4998
Power led was no longer blinking on the iTach. After cycling power on iTach, power led started blinking again.
However, HS doesn't appear to reconnect to iTach. When I try sending IR, no IR is sent and no error is reported. I've turned debug mode on and collected the log below.
26/01/2011 10:04:31 - UltraGCIR Debug - Section: Options, Key: Debug, Value: False
26/01/2011 10:04:31 - UltraGCIR Debug - Entered SaveSetting() subroutine.
26/01/2011 10:04:31 - UltraGCIR Debug - Section: Options, Key: RegisterLink, Value: True
26/01/2011 10:04:31 - UltraGCIR Debug - Entered SaveSetting() subroutine.
26/01/2011 10:04:31 - UltraGCIR Debug - Section: WEBUsers, Key: AuthorizedRoles, Value: 2
26/01/2011 10:04:31 - UltraGCIR Debug - Entered SaveSetting() subroutine.
26/01/2011 10:04:31 - UltraGCIR Debug - Section: Options, Key: WaitTime, Value: 2
26/01/2011 10:04:31 - UltraGCIR Debug - Entered SaveSetting() subroutine.
26/01/2011 10:04:25 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:04:15 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:04:05 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:55 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:45 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:35 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:31 - UltraGCIR Debug - The SetIO call was generated locally.
26/01/2011 10:03:31 - UltraGCIR Debug - Entered SetIO() subroutine.
26/01/2011 10:03:31 - UltraGCIR Debug - Locally generated SetDeviceValue for ]12 to 0, triggers False
26/01/2011 10:03:31 - UltraGCIR Debug - Entered SetIO() subroutine.
26/01/2011 10:03:31 - Device Control - Command sent to GlobalCache IR_BLASTER UltraGCIR Plugin IR_BLASTER Module 1:3: ]12 Value Set Dimval: 9 Data: 0
26/01/2011 10:03:28 - UltraGCIR Debug - The SetIO call was generated locally.
26/01/2011 10:03:28 - UltraGCIR Debug - Entered SetIO() subroutine.
26/01/2011 10:03:28 - UltraGCIR Debug - Locally generated SetDeviceValue for ]12 to 0, triggers False
26/01/2011 10:03:28 - UltraGCIR Debug - Entered SetIO() subroutine.
26/01/2011 10:03:28 - Device Control - Command sent to GlobalCache IR_BLASTER UltraGCIR Plugin IR_BLASTER Module 1:3: ]12 Value Set Dimval: 9 Data: 0
26/01/2011 10:03:15 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:05 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:02:56 - Debug - options page took 0,015625 seconds
26/01/2011 10:02:56 - UltraGCIR Debug - Section: Options, Key: Debug, Value: True
26/01/2011 10:02:56 - UltraGCIR Debug - Entered GetSetting() function.
26/01/2011 10:02:56 - UltraGCIR Debug - Section: Options, Key: RegisterLink, Value: True
26/01/2011 10:02:56 - UltraGCIR Debug - Entered GetSetting() function.
26/01/2011 10:02:56 - UltraGCIR Debug - Section: Options, Key: WaitTime, Value: 2
26/01/2011 10:02:56 - UltraGCIR Debug - Entered GetSetting() function.
Regards,
Nicolas
running HS 2.5.0.1, iTach WF2IR firmware 710-1001-02.
Today, I got the following error messages:
26/01/2011 09:58:20 - UltraGCIR Warning - Watchdog Timer reconnect attempt failed.
26/01/2011 09:58:20 - UltraGCIR Error - Ethernet connection could not be made to 192.168.2.54:4998 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.2.54:4998
Power led was no longer blinking on the iTach. After cycling power on iTach, power led started blinking again.
However, HS doesn't appear to reconnect to iTach. When I try sending IR, no IR is sent and no error is reported. I've turned debug mode on and collected the log below.
26/01/2011 10:04:31 - UltraGCIR Debug - Section: Options, Key: Debug, Value: False
26/01/2011 10:04:31 - UltraGCIR Debug - Entered SaveSetting() subroutine.
26/01/2011 10:04:31 - UltraGCIR Debug - Section: Options, Key: RegisterLink, Value: True
26/01/2011 10:04:31 - UltraGCIR Debug - Entered SaveSetting() subroutine.
26/01/2011 10:04:31 - UltraGCIR Debug - Section: WEBUsers, Key: AuthorizedRoles, Value: 2
26/01/2011 10:04:31 - UltraGCIR Debug - Entered SaveSetting() subroutine.
26/01/2011 10:04:31 - UltraGCIR Debug - Section: Options, Key: WaitTime, Value: 2
26/01/2011 10:04:31 - UltraGCIR Debug - Entered SaveSetting() subroutine.
26/01/2011 10:04:25 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:04:15 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:04:05 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:55 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:45 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:35 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:31 - UltraGCIR Debug - The SetIO call was generated locally.
26/01/2011 10:03:31 - UltraGCIR Debug - Entered SetIO() subroutine.
26/01/2011 10:03:31 - UltraGCIR Debug - Locally generated SetDeviceValue for ]12 to 0, triggers False
26/01/2011 10:03:31 - UltraGCIR Debug - Entered SetIO() subroutine.
26/01/2011 10:03:31 - Device Control - Command sent to GlobalCache IR_BLASTER UltraGCIR Plugin IR_BLASTER Module 1:3: ]12 Value Set Dimval: 9 Data: 0
26/01/2011 10:03:28 - UltraGCIR Debug - The SetIO call was generated locally.
26/01/2011 10:03:28 - UltraGCIR Debug - Entered SetIO() subroutine.
26/01/2011 10:03:28 - UltraGCIR Debug - Locally generated SetDeviceValue for ]12 to 0, triggers False
26/01/2011 10:03:28 - UltraGCIR Debug - Entered SetIO() subroutine.
26/01/2011 10:03:28 - Device Control - Command sent to GlobalCache IR_BLASTER UltraGCIR Plugin IR_BLASTER Module 1:3: ]12 Value Set Dimval: 9 Data: 0
26/01/2011 10:03:15 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:03:05 - UltraGCIR Debug - DiscoveryBeacon: Global Cache unit iTachWF2IR [192.168.2.54] is alive.
26/01/2011 10:02:56 - Debug - options page took 0,015625 seconds
26/01/2011 10:02:56 - UltraGCIR Debug - Section: Options, Key: Debug, Value: True
26/01/2011 10:02:56 - UltraGCIR Debug - Entered GetSetting() function.
26/01/2011 10:02:56 - UltraGCIR Debug - Section: Options, Key: RegisterLink, Value: True
26/01/2011 10:02:56 - UltraGCIR Debug - Entered GetSetting() function.
26/01/2011 10:02:56 - UltraGCIR Debug - Section: Options, Key: WaitTime, Value: 2
26/01/2011 10:02:56 - UltraGCIR Debug - Entered GetSetting() function.
Regards,
Nicolas
Comment