Been puzzling over this one all morning. Just started happening today.
My OMNI ALC dimmable light units are resetting themselves to zero after being set to a value between 1 and 99. Setting them to 0 or 100 works fine, anything 1-99 immediately resets to zero.
Here is an example from the OMNI log.
2/17/2018 11:41:01 AM [2] [SetIOMulti: CC.Ref=[587] CC.ControlValue=[51]]
2/17/2018 11:41:01 AM [2] [Unit_Dim: unitId=38 dimVal=51]
2/17/2018 11:41:02 AM [2] [UNSOLICITED: ExtendedStatus]
2/17/2018 11:41:02 AM [2] [---->Unit]
2/17/2018 11:41:02 AM [2] [-->UNIT: desc=[] number=[38] name=[BKFAST CANS]]
2/17/2018 11:41:02 AM [2] [-->Unsolicited: Unit=[38] status=[0]/[OFF] type=[2]]
2/17/2018 11:41:02 AM [2] [--> Unit 38 changed status. Updating Homeseer...]
As far as my limited intellect goes, the two lines timestamped 11:41:01 are me setting the unit to a value of 51. The rest seem to be resetting to zero (off).
What's happening here? This just started, co-incidentally it may be, with my upgrade to 3.0.2.5
Tom
My OMNI ALC dimmable light units are resetting themselves to zero after being set to a value between 1 and 99. Setting them to 0 or 100 works fine, anything 1-99 immediately resets to zero.
Here is an example from the OMNI log.
2/17/2018 11:41:01 AM [2] [SetIOMulti: CC.Ref=[587] CC.ControlValue=[51]]
2/17/2018 11:41:01 AM [2] [Unit_Dim: unitId=38 dimVal=51]
2/17/2018 11:41:02 AM [2] [UNSOLICITED: ExtendedStatus]
2/17/2018 11:41:02 AM [2] [---->Unit]
2/17/2018 11:41:02 AM [2] [-->UNIT: desc=[] number=[38] name=[BKFAST CANS]]
2/17/2018 11:41:02 AM [2] [-->Unsolicited: Unit=[38] status=[0]/[OFF] type=[2]]
2/17/2018 11:41:02 AM [2] [--> Unit 38 changed status. Updating Homeseer...]
As far as my limited intellect goes, the two lines timestamped 11:41:01 are me setting the unit to a value of 51. The rest seem to be resetting to zero (off).
What's happening here? This just started, co-incidentally it may be, with my upgrade to 3.0.2.5
Tom
Comment