Announcement

Collapse
No announcement yet.

Status

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Status

    I have a screen in HS Thouch with all my lights listed with a button besides the name. The name both controls the lights and changes color based on if it's on, off or dim. Recently 3 off them stop showing status. I just get image not available. This happens with on, off and dim. If i designate another switch to that button the button displays correctly. At first image not available suggested to me that the issue was that status image wasn't set correctly. But if I change the button to track another switch it's fine and if I get a working button to track the ones not displaying status I get the image not available. Also when showing image not available the button still controls the lights. So it looks like HS Touch doesn't get status feedback from the 3 switches. What could cause this?

    #2
    Just off the top of my head, it sounds like the status of those three switches isn't matching any of the three values you're checking against.

    What does the web interface show if you go into one of the switches advanced device configuration pages?

    Also, is the web interface showing the correct status on the device management page?
    --
    Bob Paauwe
    ISYInsteon Plug-in
    http://www.bobsplace.com/ISYInsteon/

    Comment


      #3
      The web interface does show correct status. On the advance tab status and value display correctly. So it looks like HS is seeing correctly but not HS Touch

      Comment


        #4
        That's good news, for me anyway

        I've played with HSTouch a bit but don't really feel qualified to debug it.
        --
        Bob Paauwe
        ISYInsteon Plug-in
        http://www.bobsplace.com/ISYInsteon/

        Comment

        Working...
        X