HS3Pro trying to run 3 Z-NET modules.
The first module came on line easily using the Homeseer Z-NET Ethernet interface. The second module would not come on line using the same interface so I switched to the Ethernet Interface, and after a few attempts it finally was recognized by HS3.
The third module will not come on line no matter what I do. The module is easily found through find.homeseer.com and I can update and reboot the module there. As shown in the example below the module is being found but will not respond with the HomeID and Node.
I have researched this forum on the subject and see no definitive answer to this problem. I'd sure appreciate some advice if you have it.
Current Date/Time: 1/19/2017 8:24:43 AM
HomeSeer Version: HS3 Pro Edition 3.0.0.298
Operating System: Microsoft Windows 7 Professional - Work Station
System Uptime: 0 Days 0 Hours 29 Minutes 32 Seconds
IP Address: xxx.xxx.xxx.xxx
Number of Devices: 60
Number of Events: 16
Available Threads: 400
Enabled Plug-Ins
0.0.0.25: drhsIpPlugIn
3.0.0.68: HSTouch Server
3.0.1.87: Z-Wave
The first module came on line easily using the Homeseer Z-NET Ethernet interface. The second module would not come on line using the same interface so I switched to the Ethernet Interface, and after a few attempts it finally was recognized by HS3.
The third module will not come on line no matter what I do. The module is easily found through find.homeseer.com and I can update and reboot the module there. As shown in the example below the module is being found but will not respond with the HomeID and Node.
I have researched this forum on the subject and see no definitive answer to this problem. I'd sure appreciate some advice if you have it.
Current Date/Time: 1/19/2017 8:24:43 AM
HomeSeer Version: HS3 Pro Edition 3.0.0.298
Operating System: Microsoft Windows 7 Professional - Work Station
System Uptime: 0 Days 0 Hours 29 Minutes 32 Seconds
IP Address: xxx.xxx.xxx.xxx
Number of Devices: 60
Number of Events: 16
Available Threads: 400
Enabled Plug-Ins
0.0.0.25: drhsIpPlugIn
3.0.0.68: HSTouch Server
3.0.1.87: Z-Wave
Comment