This is the Beta Notes section for the Arduino Plugin by EnigmaTheatre (Greig Dempster).
All Notes are now included in the updater by clicking on the Release Info link.
There have been many changes in the plugin from V1.0.0.36 and I will try and highlight as much as I can in this post. I will also update this with information on any new Betas that are posted so people can see the changes and choose to update or not.
Click on the version number below to download the updater_override.txt
The Beta Manual can be found Here.
Main Changes from 1.0.0.36 are:
Now works with V1.6.5-r5 Arduino IDE please update the IDE and the libraries
Linux compatible with Ethernet connection only
LCD Display has been added
Debounce on the input was fixed
Fixed URL encoding on the config page.
PWM now uses Soft PWM so any pin can be used on the board.
Added Alive pin to board that triggers on board disconnect
Added Advanced Ethernet settings to allow all pins to be used.
Added Advanced comport settings to allow baud to be set
Added one wire resolution
Added one wire error value to devices
Added RGB Colour picker to device management page
Added Lots more logging
Add Pin to user notes.
Fixed international formatting
Fixed HSTouch tracking
Connect and disconnect buttons on the config page now update
Added timer for fault of one wire bus
40 inputs can now be used
Lots of other bug fixes
V1.0.0.105
Changes to threading
Now works with V1.6.8 Arduino IDE please update the IDE and the libraries
V1.0.0.107
Fix baud not being added to the INO if advanced is selected
More connection attempt fixes.
Changes to speed up config page load.
V1.0.0.108
Added Ethernet Shield V2 checkbox
Fixed logging on config missing enteries.
.ino changes
Logging changes.
V1.0.0.109
Added Reset to Config page
Added board status errors to config page
Changes to Threading
Changes to Sum on Analogue in to accept more calculations.
Change to Auto connect button in UI to stop updates on logging
V1.0.0.110
Add auto find gateway and subnet. No Linux support.
Added gateway and Subnet
V1.0.0.112
Add output Blink, flash and toggle
V1.0.0.113
Fix Analog Input Truncates to Zero Decimal Places
V1.0.0.115
Add dec place to config and fix in Analouge in
V1.0.0.116
Fixed outputs not updating to blink on startup.
work on nodemcu support.
Fixed Debounce not updating
Added API Version to config page
Fix onewire error
V1.0.0.117
Fix ino download error from V.116
V1.0.0.118
Fix config page error.
Fix boards not connecting.
Fix ino download
V1.0.0.122
Fixed sketch to fit on Uno Boards.
V1.0.0.123
Fixed max outputs to 40 not 10
V1.0.0.124
Fix API.ino mismatch error
V1.0.0.125
reduce cpu usage.
Change one wire Error update code.
V1.0.0.126
Fix Analogue input bug.
V1.0.0.129
Fix Analogue update time
V1.0.0.140
Removed old debug error message
Added Output invert
V1.0.0.140
Added RomErrorTime
Fixed false Rom errors
V1.0.0.130
Fix for HS.Event error
Now works with V1.8.1 Arduino IDE please update the IDE and the libraries
V1.0.0.132
Change max boards to 30
Change to speed up config page loading
Changed UI board selection to dropdown
fixed Auto Connect on Board 1
fix advanced ethernet not showing pins
Removed rom status graphic reset on restart.
changed send command to stop calling Homeseer on every send as data is now stored in the plugin.
V1.0.0.133
Fixed one wire Exception
Fixed logging not showing in HS Log.
RecievedData changed to use new Arrays for speed
Changed config drop list to not include location or type
Added NodeMCU inputs
V1.0.0.134
Fix for connection Error in isconnected function
Added NodeMcu LCD
Fixed LCD Delete
Added LCD Address
V1.0.0.135
Fix IsConnected exception
V1.0.0.136
Fixed Bug when changing from IP to Com
Added NodeMcu support
Fix sending doubles in API Sketch
Fix Sketch Download error
V1.0.0.138
Fix for API input Decimal seperator in some locations.
Fixed Error adding Pin D3 as Alive pin to NodeMcu
Added LCD Address Warning
V1.0.0.139
Anohter Fix for API input Decimal separator in some locations.
V1.0.0.140
Add NodeMCU API
Fixed Errors not showing on config page
V1.0.0.141
Fixed Sketch Download not updating values
V1.0.0.142
Added Try to Auto reset on board error.
Added Board reconnect every 3min on connection fail.
Fix Analog setup showing with no analog pins in use
Fix API not updating the SSID and password
V1.0.0.143
Fixed false Rom error timeout
Added Do Not Update on startup to output devices to stop value reset.
Fix LCD Update slowdown
In Sketch:
Added LCD Status Messages
Added code to hide SSID
Added OTA update to NodeMCU. API to follow.
Added OTA Status to LCD
V1.0.0.144
In Sketch:
Fixed auto reset on board
Fix alive pin not showing some disconnects
V1.0.0.145
In Sketch:
Fix Output blink > 9 not working
Fixed bug in output One Flash
Removed unwanted Linux Debug code
V1.0.0.146
Added OTA Update to API NodeMCU
Added code to hide SSID on NodeMCU in API sketch
V1.0.0.147
Fixed one wire not updating.
All Notes are now included in the updater by clicking on the Release Info link.
Greig.
All Notes are now included in the updater by clicking on the Release Info link.
There have been many changes in the plugin from V1.0.0.36 and I will try and highlight as much as I can in this post. I will also update this with information on any new Betas that are posted so people can see the changes and choose to update or not.
Click on the version number below to download the updater_override.txt
The Beta Manual can be found Here.
Main Changes from 1.0.0.36 are:
Now works with V1.6.5-r5 Arduino IDE please update the IDE and the libraries
Linux compatible with Ethernet connection only
LCD Display has been added
Debounce on the input was fixed
Fixed URL encoding on the config page.
PWM now uses Soft PWM so any pin can be used on the board.
Added Alive pin to board that triggers on board disconnect
Added Advanced Ethernet settings to allow all pins to be used.
Added Advanced comport settings to allow baud to be set
Added one wire resolution
Added one wire error value to devices
Added RGB Colour picker to device management page
Added Lots more logging
Add Pin to user notes.
Fixed international formatting
Fixed HSTouch tracking
Connect and disconnect buttons on the config page now update
Added timer for fault of one wire bus
40 inputs can now be used
Lots of other bug fixes
V1.0.0.105
Changes to threading
Now works with V1.6.8 Arduino IDE please update the IDE and the libraries
V1.0.0.107
Fix baud not being added to the INO if advanced is selected
More connection attempt fixes.
Changes to speed up config page load.
V1.0.0.108
Added Ethernet Shield V2 checkbox
Fixed logging on config missing enteries.
.ino changes
Logging changes.
V1.0.0.109
Added Reset to Config page
Added board status errors to config page
Changes to Threading
Changes to Sum on Analogue in to accept more calculations.
Change to Auto connect button in UI to stop updates on logging
V1.0.0.110
Add auto find gateway and subnet. No Linux support.
Added gateway and Subnet
V1.0.0.112
Add output Blink, flash and toggle
V1.0.0.113
Fix Analog Input Truncates to Zero Decimal Places
V1.0.0.115
Add dec place to config and fix in Analouge in
V1.0.0.116
Fixed outputs not updating to blink on startup.
work on nodemcu support.
Fixed Debounce not updating
Added API Version to config page
Fix onewire error
V1.0.0.117
Fix ino download error from V.116
V1.0.0.118
Fix config page error.
Fix boards not connecting.
Fix ino download
V1.0.0.122
Fixed sketch to fit on Uno Boards.
V1.0.0.123
Fixed max outputs to 40 not 10
V1.0.0.124
Fix API.ino mismatch error
V1.0.0.125
reduce cpu usage.
Change one wire Error update code.
V1.0.0.126
Fix Analogue input bug.
V1.0.0.129
Fix Analogue update time
V1.0.0.140
Removed old debug error message
Added Output invert
V1.0.0.140
Added RomErrorTime
Fixed false Rom errors
V1.0.0.130
Fix for HS.Event error
Now works with V1.8.1 Arduino IDE please update the IDE and the libraries
V1.0.0.132
Change max boards to 30
Change to speed up config page loading
Changed UI board selection to dropdown
fixed Auto Connect on Board 1
fix advanced ethernet not showing pins
Removed rom status graphic reset on restart.
changed send command to stop calling Homeseer on every send as data is now stored in the plugin.
V1.0.0.133
Fixed one wire Exception
Fixed logging not showing in HS Log.
RecievedData changed to use new Arrays for speed
Changed config drop list to not include location or type
Added NodeMCU inputs
V1.0.0.134
Fix for connection Error in isconnected function
Added NodeMcu LCD
Fixed LCD Delete
Added LCD Address
V1.0.0.135
Fix IsConnected exception
V1.0.0.136
Fixed Bug when changing from IP to Com
Added NodeMcu support
Fix sending doubles in API Sketch
Fix Sketch Download error
V1.0.0.138
Fix for API input Decimal seperator in some locations.
Fixed Error adding Pin D3 as Alive pin to NodeMcu
Added LCD Address Warning
V1.0.0.139
Anohter Fix for API input Decimal separator in some locations.
V1.0.0.140
Add NodeMCU API
Fixed Errors not showing on config page
V1.0.0.141
Fixed Sketch Download not updating values
V1.0.0.142
Added Try to Auto reset on board error.
Added Board reconnect every 3min on connection fail.
Fix Analog setup showing with no analog pins in use
Fix API not updating the SSID and password
V1.0.0.143
Fixed false Rom error timeout
Added Do Not Update on startup to output devices to stop value reset.
Fix LCD Update slowdown
In Sketch:
Added LCD Status Messages
Added code to hide SSID
Added OTA update to NodeMCU. API to follow.
Added OTA Status to LCD
V1.0.0.144
In Sketch:
Fixed auto reset on board
Fix alive pin not showing some disconnects
V1.0.0.145
In Sketch:
Fix Output blink > 9 not working
Fixed bug in output One Flash
Removed unwanted Linux Debug code
V1.0.0.146
Added OTA Update to API NodeMCU
Added code to hide SSID on NodeMCU in API sketch
V1.0.0.147
Fixed one wire not updating.
All Notes are now included in the updater by clicking on the Release Info link.
Greig.
Comment