This plugin is designed to allow HomeSeer (HS3 or HS3PRO) to control UPB (Universal Powerline Bus) hardware.
Please report any bug.
Please read the User Guide before installing.
Installation:
- Fixed exception thrown when a parsing error happen with the PulseWorx Gateway PGW
Changes to v3.0.0.43
- Handle SA UCT Tabletop Controller, as generic keypad devices.
Changes to v3.0.0.42
- Added possibility to change port for the PGW
Changes to v3.0.0.41
- Automatic update of Link devices so that the "Is Dimmable" field is set.
Changes to v3.0.0.40
- Added room to the name of device in the device list of the "Poll Device State" action
Changes to v3.0.0.39
- Automatic update of Link devices created with version < 3.0.0.35 so that ControUse field is set for Activate/Deactivate.
Changes to v3.0.0.38
- Fixed regression introduced in .35 for UMI-32 3-Input / 2-Output Module
Changes to v3.0.0.37
- Fixed problem with multiple instances feature.
Changes to v3.0.0.36
- Added ability to run multiple instances of the plug-in
- Fixed import error
Changes to v3.0.0.35
- Support for UCQF-W 3-Speed Fan controller
- Set Control-Use On/Off property for Link devices Activate/Deactivate controls
Changes to v3.0.0.31
- Added possibility to change number of transmission attempts
Changes to v3.0.0.30
- Added support for PulseWorx Gateway PGW (Ethernet based controller)
- Added icon for different dim levels
Changes to v3.0.0.29
- Fixed possible buffer overrun
- Added more error trapping
Changes to v3.0.0.28
- Fixed error when accessing config page for the first time.
Changes to v3.0.0.27
- Added "Fade Up", "Fade Down", "Goto On", "Goto Off" as possible actions for the "UPB device transmits Link" trigger
- Fixed "Fade Stop" problem
Changes to v3.0.0.26
- Added "Action" parameter to "UPB device transmits Link" trigger
- Speed up handling of HS devices
Changes to v3.0.0.25
- Added "UPB Device transmits Link" trigger
Changes to v3.0.0.24
- Fixed problem with devices being updated after each plugin restart.
Changes to v3.0.0.23
- Added setting to disable polling of devices at startup.
Changes to v3.0.0.22
- Automatic upgrade of devices.
Changes to v3.0.0.21
- Added Blink feature for both links and devices
Changes to v3.0.0.20
- Fixed Snap On/Snap Off status for Links
Changes to v3.0.0.19
- ignore messages received that have already been treated in a previous transmission
Changes to v3.0.0.18
- added support for HAI keypad indicator lights
- fixed status device update when turning on a dimming device
Changes to v3.0.0.15:
- Fixed problem with using default fade rate (255) for non dimming devices.
Changes to v3.0.0.14:
- Added indicator lights on/off buttons for keypads
Changes to v3.0.0.13:
- Fixed crash when the plugin is shut down.
Changes to v3.0.0.12:
- Implemented ControlUse interface for UPB devices
Changes to v3.0.0.11:
- Fixed issue with Timed Event Controller.
- Cosmetic changes
Changes to v3.0.0.9:
- Added support for keypads.
- Implemented HS polling feature
Changes to v3.0.0.8:
- Added "Poll Device State" Action.
Changes to v3.0.0.7:
- Fixed problem when turning on non dimmable devices
Changes to v3.0.0.6:
- Fixed problem with I/O devices
- Fixed problem with Links not reporting their status to HS devices
Changes to v3.0.0.5:
- Added support for I/O devices and devices with several channels
- Added an import button on config page which allow to re-import the .upe file without restarting the plugin.
Changes to v3.0.0.4:
- Renamed plugin to UPBSpud to avoid license issues with the HS2 UPB plugin
Changes to v3.0.0.3:
- Possibility to override the serial port configuration from UPB.ini
Changes to v3.0.0.2:
- Fixed a problem preventing import of device with more than 1 channel
Changes to v3.0.0.1:
- Plugin now works on Linux
- Fixed a problem preventing the plugin to shutdown gracefully.
spud
Please report any bug.
Please read the User Guide before installing.
Installation:
- download the zip attached to this post and save it in the HS3 application folder /updates3/zips
- download the file named updater_override.txt attached to this post and save it in the HS3 application folder.
- go to the "PLUG-INS > Manage" page and click the "Update Listing" button, then click "Additional interfaces > Test Plugin" and check the UPB line.
- click the "Download and Install" button
- enable the plugin from the "PLUG-INS > Manage" page
- delete updater_override.txt from your HS3 application folder
- Fixed exception thrown when a parsing error happen with the PulseWorx Gateway PGW
Changes to v3.0.0.43
- Handle SA UCT Tabletop Controller, as generic keypad devices.
Changes to v3.0.0.42
- Added possibility to change port for the PGW
Changes to v3.0.0.41
- Automatic update of Link devices so that the "Is Dimmable" field is set.
Changes to v3.0.0.40
- Added room to the name of device in the device list of the "Poll Device State" action
Changes to v3.0.0.39
- Automatic update of Link devices created with version < 3.0.0.35 so that ControUse field is set for Activate/Deactivate.
Changes to v3.0.0.38
- Fixed regression introduced in .35 for UMI-32 3-Input / 2-Output Module
Changes to v3.0.0.37
- Fixed problem with multiple instances feature.
Changes to v3.0.0.36
- Added ability to run multiple instances of the plug-in
- Fixed import error
Changes to v3.0.0.35
- Support for UCQF-W 3-Speed Fan controller
- Set Control-Use On/Off property for Link devices Activate/Deactivate controls
Changes to v3.0.0.31
- Added possibility to change number of transmission attempts
Changes to v3.0.0.30
- Added support for PulseWorx Gateway PGW (Ethernet based controller)
- Added icon for different dim levels
Changes to v3.0.0.29
- Fixed possible buffer overrun
- Added more error trapping
Changes to v3.0.0.28
- Fixed error when accessing config page for the first time.
Changes to v3.0.0.27
- Added "Fade Up", "Fade Down", "Goto On", "Goto Off" as possible actions for the "UPB device transmits Link" trigger
- Fixed "Fade Stop" problem
Changes to v3.0.0.26
- Added "Action" parameter to "UPB device transmits Link" trigger
- Speed up handling of HS devices
Changes to v3.0.0.25
- Added "UPB Device transmits Link" trigger
Changes to v3.0.0.24
- Fixed problem with devices being updated after each plugin restart.
Changes to v3.0.0.23
- Added setting to disable polling of devices at startup.
Changes to v3.0.0.22
- Automatic upgrade of devices.
Changes to v3.0.0.21
- Added Blink feature for both links and devices
Changes to v3.0.0.20
- Fixed Snap On/Snap Off status for Links
Changes to v3.0.0.19
- ignore messages received that have already been treated in a previous transmission
Changes to v3.0.0.18
- added support for HAI keypad indicator lights
- fixed status device update when turning on a dimming device
Changes to v3.0.0.15:
- Fixed problem with using default fade rate (255) for non dimming devices.
Changes to v3.0.0.14:
- Added indicator lights on/off buttons for keypads
Changes to v3.0.0.13:
- Fixed crash when the plugin is shut down.
Changes to v3.0.0.12:
- Implemented ControlUse interface for UPB devices
Changes to v3.0.0.11:
- Fixed issue with Timed Event Controller.
- Cosmetic changes
Changes to v3.0.0.9:
- Added support for keypads.
- Implemented HS polling feature
Changes to v3.0.0.8:
- Added "Poll Device State" Action.
Changes to v3.0.0.7:
- Fixed problem when turning on non dimmable devices
Changes to v3.0.0.6:
- Fixed problem with I/O devices
- Fixed problem with Links not reporting their status to HS devices
Changes to v3.0.0.5:
- Added support for I/O devices and devices with several channels
- Added an import button on config page which allow to re-import the .upe file without restarting the plugin.
Changes to v3.0.0.4:
- Renamed plugin to UPBSpud to avoid license issues with the HS2 UPB plugin
Changes to v3.0.0.3:
- Possibility to override the serial port configuration from UPB.ini
Changes to v3.0.0.2:
- Fixed a problem preventing import of device with more than 1 channel
Changes to v3.0.0.1:
- Plugin now works on Linux
- Fixed a problem preventing the plugin to shutdown gracefully.
spud
Comment