Double Log Entries for Temp Devices

[racerfern]

Both my Qubino and Fibaro devices have temperature child devices. 99% of the time they post twice in the log. Any ideas?

I just installed a Qubino Flush 1 relay and I see double entries most of the time showing up in the log. Anyone see anything similar or have a solution?

Now I noticed the Fibaro doing the same thing. Ideas???

Mar-07 14:40:00 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 78.98 (F)
Mar-07 14:40:00 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 78.98 (F)
Mar-07 14:38:56 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 79.88 (F)
Mar-07 14:38:56 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 79.88 (F)
Mar-07 14:37:29 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 80.78 (F)
Mar-07 14:37:29 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 80.78 (F)
Mar-07 14:35:57 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 81.68 (F)
Mar-07 14:35:57 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 81.68 (F)
Mar-07 14:34:33 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 82.58 (F)
Mar-07 14:34:33 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 82.58 (F)
Mar-07 14:32:58 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 83.48 (F)
Mar-07 14:32:58 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 83.48 (F)
Mar-07 14:31:20 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 84.38 (F)
Mar-07 14:31:20 Z-Wave Device: Controls Command Central Hot Water Recirc Temp Set to 84.38 (F)

FIBARO
Mar-08 16:15:09 Z-Wave Device: HVAC Garage Temperature 2 Set to 53.996 (F)
Mar-08 16:15:09 Z-Wave Device: HVAC Garage Temperature 2 Set to 53.996 (F)
Mar-08 15:29:34 Z-Wave Device: HVAC Garage Temperature 2 Set to 52.952 (F)
Mar-08 15:29:34 Z-Wave Device: HVAC Garage Temperature 2 Set to 52.952 (F)

Current Date/Time: 3/8/2018 16:18:26
HomeSeer Version: HS3 Standard Edition 3.0.0.418
Operating System: Microsoft Windows 10 Home - Work Station
System Uptime: 2 Days 2 Hours 23 Minutes 34 Seconds
IP Address: 192.168.1.177
Number of Devices: 429
Number of Events: 143
Available Threads: 200
HSTouch Enabled: True
Event Threads: 3
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed: Windows Defender

Enabled Plug-Ins
2.0.54.0: BLOnkyo
3.0.0.16: Chromecast
3.0.0.43: EasyTrigger
1.2.1.0: Honeywell WiFi Thermostat
2.0.1.11: JowiHue
3.0.0.28: MediaController
3.0.1.109: PHLocation
1.0.0.7: Restart
3.0.6542.35207: UltraWeatherWU3
3.0.0.82: weatherXML
3.0.1.195: Z-Wave

[racerfern]

+1

No one else? Two different manufacturers!

[bebaldin]

I have been putting up for duplicate (or more) log entries in HS since I started using it a couple of years ago. In my case, the most obnoxious offenders are the Aeotec Gen5 Home Energy Monitors (which duplicate EVERY log entry on every child device), and the Aeotec Smart Strips (which sometimes generate 10 or more duplicates).

I have posted questions about this before, but no one seems to know the answer.

[racerfern]

I filed a bugzilla for this. #3593

[Corvl1]

I filed a bugzilla for this. #3593

Any news on this?

I migrated a lot of devices this week from Vera to Homeseer , I noticed that all my "fibaro universal sensors" log the temperatures double.

Thanks,
Cor

[racerfern]

I never heard a word. I stopped logging of my Qubino temp sensor since it didn't affect the operation of my events. But I just turned it back on and can confirm it is not fixed, there is still double logging.

[Corvl1]

racerfern
All that logging , will that slow down homeseer? Since I have 5 walltablets and every 2 seconds I see one tablet logging in as well:




Thanks.
Cor

[racerfern]

Like I said, I stopped the logging of the temp devices. It is still seen HS since it updates on the device page and hence the events still function.

[lveatch]

Is the device associated to homeseer multiple times? (Found in the devices zwave tab)

[racerfern]

See below.

[lveatch]

Should only have one association to homeseer. I would delete the 2nd entry. Before you do, check your device settings too and record how frequent it is set to update homeseer so you can reset the values needed.

[racerfern]

Wishful thinking. I deleted the 2nd entry and I still get double logging.