I want to add an Aeotec Keyfob into HS3. I use Z-Tool+ android app. I have a Z-Troller. I followed the instructions from the Homeseer Youtube tutorial.
The device was recognized and added as Node 10. I had a full log page on my phone, that ended with:
"Z-Troller: Adding association for Z-Wave device Node 10 Z-Wave Aeon Labs Generic Controller Node 10 (Node 10, Group 1) to Homesser."
Nothing happened for about 1 minute, then I got this error :
"Error GetZWaveStatus - Error communicating with HomeSeer, you will need to re-select your system. Bad JSON escape sequence:\P.Path 'Response',line 18, position 41."
At this point, the only option is to acknowledge the error and select my Homeseer server again. This seems to abort the process. I never got to the page where I can define the new device in Z-Tool+.
In HS3, there's a new device associated to the node, but only the battery status is defined (instead of the 4 buttons), making it unusable with events.
I've retried this whole process 2 times with the same results.
Is there anybody that can help me on the error?
Or
Is there anybody who knows how to completed the set up of my device?
Thank you!
Richard
Current Date/Time: 2015-11-13 22:30:13
HomeSeer Version: HS3 Standard Edition 3.0.0.208
Operating System: Microsoft Windows XP Professional - Work Station
System Uptime: 4 Days 1 Hour 35 Minutes 45 Seconds
IP Address: 192.168.1.118
Number of Devices: 96
Number of Events: 68
Enabled Plug-Ins
3.0.0.5: AirplaySpeak
2.0.49.0: BLLock
2.0.17.0: BLUPS
3.0.0.75: HSTouch Server
3.0.0.17: iAutomate RFID
3.0.5.20: Insteon
30.0.0.29: RFXCOM
2.6.2.0: SCSIP
3.0.5755.18523: UltraMon3
3.0.5614.14045: UltraNetCam3
3.0.1.25: Z-Wave
The device was recognized and added as Node 10. I had a full log page on my phone, that ended with:
"Z-Troller: Adding association for Z-Wave device Node 10 Z-Wave Aeon Labs Generic Controller Node 10 (Node 10, Group 1) to Homesser."
Nothing happened for about 1 minute, then I got this error :
"Error GetZWaveStatus - Error communicating with HomeSeer, you will need to re-select your system. Bad JSON escape sequence:\P.Path 'Response',line 18, position 41."
At this point, the only option is to acknowledge the error and select my Homeseer server again. This seems to abort the process. I never got to the page where I can define the new device in Z-Tool+.
In HS3, there's a new device associated to the node, but only the battery status is defined (instead of the 4 buttons), making it unusable with events.
I've retried this whole process 2 times with the same results.
Is there anybody that can help me on the error?
Or
Is there anybody who knows how to completed the set up of my device?
Thank you!
Richard
Current Date/Time: 2015-11-13 22:30:13
HomeSeer Version: HS3 Standard Edition 3.0.0.208
Operating System: Microsoft Windows XP Professional - Work Station
System Uptime: 4 Days 1 Hour 35 Minutes 45 Seconds
IP Address: 192.168.1.118
Number of Devices: 96
Number of Events: 68
Enabled Plug-Ins
3.0.0.5: AirplaySpeak
2.0.49.0: BLLock
2.0.17.0: BLUPS
3.0.0.75: HSTouch Server
3.0.0.17: iAutomate RFID
3.0.5.20: Insteon
30.0.0.29: RFXCOM
2.6.2.0: SCSIP
3.0.5755.18523: UltraMon3
3.0.5614.14045: UltraNetCam3
3.0.1.25: Z-Wave
Comment