Announcement
Collapse
No announcement yet.
Table Lamp Solution
Collapse
X
-
how are you going to use that to accomplish turning on from bedside?
to answer your question on how I do it.. I use x10 lamp modules... if HS turns off the lamps... I have to turn them off then back on and the lamp module turns on...
someone posted up of a zwave that does this. I forget which and hope they post it here...HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64
HS - HS3 Pro Edition 3.0.0.435
Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190
Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface
Comment
-
I use a Minimote (button 1) to trigger an event that turns the light on then off after 30 minutes. Works great. I use button 2 to turn music on and off. I really like the minimote. I have 6 of them. I put labels on the back to remind me of what the buttons do. Between the Minimotes and my iPhone I can control everything connected to HS3.
Steve QHomeSeer Version: HS3 Pro Edition 3.0.0.368, Operating System: Microsoft Windows 10 - Home, Number of Devices: 373, Number of Events: 666, Enabled Plug-Ins
2.0.83.0: BLRF, 2.0.10.0: BLUSBUIRT, 3.0.0.75: HSTouch Server, 3.0.0.58: mcsXap, 3.0.0.11: NetCAM, 3.0.0.36: X10, 3.0.1.25: Z-Wave,Alexa,HomeKit
Comment
-
hah now that I think about it. I have one of those x10 desk alarm. used to use it as an alarm (before using smartphone days)... and also used the buttons to do different things. may have to go find it again.
you can do virtual x10 devices (if you have an x10 controller)... and do that as well
just looked.. I may have to sell it. they are going for $50-$70 on ebay!!!!!
https://www.ebay.com/itm/X10-Mini-Ti...gAAOSw5ZtaZ8E0HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64
HS - HS3 Pro Edition 3.0.0.435
Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190
Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface
Comment
-
I still have a palmpad on the bedside table, but I have an echo dot on there as well. Either one provides control.HS4Pro on a Raspberry Pi4
54 Z-Wave Nodes / 21 Zigbee Devices / 108 Events / 767 Devices
Plugins: Z-Wave / Zigbee Plus / EasyTrigger / AK Weather / OMNI
HSTouch Clients: 1 Android
Comment
-
I gave away my palm pads years ago when I upgraded to HS3. I should have kept 1 or 2HomeSeer Version: HS3 Pro Edition 3.0.0.368, Operating System: Microsoft Windows 10 - Home, Number of Devices: 373, Number of Events: 666, Enabled Plug-Ins
2.0.83.0: BLRF, 2.0.10.0: BLUSBUIRT, 3.0.0.75: HSTouch Server, 3.0.0.58: mcsXap, 3.0.0.11: NetCAM, 3.0.0.36: X10, 3.0.1.25: Z-Wave,Alexa,HomeKit
Comment
-
I use the LightwaveRF scene switches linked via RFXCom. Gives a neat set of 5 buttons that we all have beside our beds. Works well, with a few event/script workarounds.
https://www.amazon.co.uk/Lightwave-J...ds=lightwaverf
They come in a few different finishes and with double-sided tape to stick them to the wall/the bedpost/whatever. Battery powered and last well over a year.
Cheers,
Jon.
Comment
-
Here the master bedroom has 4 automated lights. 3 table lamps are connected to one UPB switch on the wall and one is connected to an automated switch.
The night stands have tabletop HS Touchscreens and lamps (lamps 5 and 6) over each nightstand hotel style. These are controlled by remote switches right on the nightstand and are not automated.
Typically the touchscreens remain in a clock screen saver mode. The screens go off at 9PM and turn on at 9AM unless they are touched. There are touch buttons on them to shut off the screens or control sound or dim the screens.
Many many years ago did utilize X10 touch pads on the night stands and also had reading lamps on the night stands plus over the night stand lamp. Today (must be an age thing) the master bedroom is only utilized to sleep and nothing else.
Nightstands only have touchscreens and house phones. Cell phones are in off mode, not tethering and left in the kitchen / or automobiles. Many many years ago put a physical off switch on any phone lines coming in to the house such that they would not ring at night (it is not there these days).- Pete
Auto matorHomeseer 3 Pro - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e 64 bit Intel Haswell CPU 16Gb
Homeseer Zee2 (Lite) - 3.0.0.548 (Linux) - Ubuntu 18.04/W7e - CherryTrail x5-Z8350 BeeLink 4Gb BT3 Pro
HS4 Lite - Ubuntu 22.04 / Lenovo Tiny M900 / 32Gb Ram
HS4 Pro - V4.1.18.1 - Ubuntu 22.04 / Lenova Tiny M900 / 32Gb Ram
HSTouch on Intel tabletop tablets (Jogglers) - Asus AIO - Windows 11X10, UPB, Zigbee, ZWave and Wifi MQTT automation-Tasmota-Espurna. OmniPro 2, Russound zoned audio, Alexa, Cheaper RFID, W800 and Home Assistant
Comment
Comment