I have had this CT32 thermostat for years now and works well. Since around a restart at the end of February
there has been a persistent issue in the log (amber in colour) being reported:
Tracing back in the log I find:
On the very next poll this error starts:
I did a rescan this morning and appears all is reconfigured correctly:
After a couple polls since the recscan the error is reported:
So my questions are:
Thanks for any guidance.
Current config info:
Feb-28 18:55:19 Startup HomeSeer version 3.0.0.298 Edition: HS3 Standard Starting Now
Apr-01 09:07:44 Z-Wave Warning Z-Wave Multilevel Sensor device Main Dining Room CT32 - Temperature is missing Sensor Type information - cannot update sensor status.
Feb-28 19:07:14 Z-Wave Warning Node 17, EndPoint=-1 Multilevel Sensor Report was not received (B) - the child device will NOT be configured properly.
Feb-28 19:18:06 Z-Wave Warning Z-Wave Multilevel Sensor device Main Dining Room CT32 - Temperature is missing Sensor Type information - cannot update sensor status.
Apr-01 08:58:50 Z-Wave Device: Main Dining Room CT32 - Temperature Set to 21.1111111111111 (C)
Apr-01 08:58:49 Z-Wave 7 out of 7 Child devices of node 17 were created successfully.
Apr-01 08:58:49 Z-Wave Setting a polling interval of 21 Minutes, 38 Seconds on device Main Dining Room CT32 - Temperature
Apr-01 08:58:49 Z-Wave Node 17 Supports Thermostat Setpoint CC and supports these setpoints: Heating 1, Cooling 1
Apr-01 08:58:49 Z-Wave Node 17 Supports Thermostat Mode CC and supports these modes: Off, Heat, Cool
Apr-01 08:58:49 Z-Wave Node 17 Supports Thermostat Fan Mode CC and supports these modes: Auto, On
Apr-01 08:58:49 Z-Wave Device: Main Dining Room CT32 - Temperature Set to 21.1111111111111 (C)
Apr-01 08:58:48 Z-Wave Device: Node 20 Z-Wave MS002 - Test Motion Sensor Set to Off/Closed/No Motion
Apr-01 08:58:48 Z-Wave Device: Node 20 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
Apr-01 08:58:48 Z-Wave Node 17 is Z-Wave version: Lib: 2.78 App: 7.4
Apr-01 08:58:47 Z-Wave Node: 17 Supports Class(es): BASIC, INDICATOR, MANUFACTURER_SPECIFIC, SENSOR_MULTILEVEL_V2, THERMOSTAT_MODE_V3, THERMOSTAT_FAN_MODE, THERMOSTAT_SETPOINT_V3, THERMOSTAT_OPERATING_STATE_V2, VERSION_V2, CONFIGURATION, BATTERY, PROPRIETARY
Apr-01 08:58:47 Z-Wave Syncing Z-Wave nodes with device list...
Apr-01 08:58:47 Z-Wave Found 31 Z-Wave nodes
Apr-01 08:58:47 Z-Wave Getting Z-Wave node list for network C8E9XXXX...
Apr-01 08:58:49 Z-Wave 7 out of 7 Child devices of node 17 were created successfully.
Apr-01 08:58:49 Z-Wave Setting a polling interval of 21 Minutes, 38 Seconds on device Main Dining Room CT32 - Temperature
Apr-01 08:58:49 Z-Wave Node 17 Supports Thermostat Setpoint CC and supports these setpoints: Heating 1, Cooling 1
Apr-01 08:58:49 Z-Wave Node 17 Supports Thermostat Mode CC and supports these modes: Off, Heat, Cool
Apr-01 08:58:49 Z-Wave Node 17 Supports Thermostat Fan Mode CC and supports these modes: Auto, On
Apr-01 08:58:49 Z-Wave Device: Main Dining Room CT32 - Temperature Set to 21.1111111111111 (C)
Apr-01 08:58:48 Z-Wave Device: Node 20 Z-Wave MS002 - Test Motion Sensor Set to Off/Closed/No Motion
Apr-01 08:58:48 Z-Wave Device: Node 20 Z-Wave Home Security Set to NOTIFICATION for type Home Security, Event: No Event
Apr-01 08:58:48 Z-Wave Node 17 is Z-Wave version: Lib: 2.78 App: 7.4
Apr-01 08:58:47 Z-Wave Node: 17 Supports Class(es): BASIC, INDICATOR, MANUFACTURER_SPECIFIC, SENSOR_MULTILEVEL_V2, THERMOSTAT_MODE_V3, THERMOSTAT_FAN_MODE, THERMOSTAT_SETPOINT_V3, THERMOSTAT_OPERATING_STATE_V2, VERSION_V2, CONFIGURATION, BATTERY, PROPRIETARY
Apr-01 08:58:47 Z-Wave Syncing Z-Wave nodes with device list...
Apr-01 08:58:47 Z-Wave Found 31 Z-Wave nodes
Apr-01 08:58:47 Z-Wave Getting Z-Wave node list for network C8E9XXXX...
Apr-01 09:07:44 Z-Wave Warning Z-Wave Multilevel Sensor device Main Dining Room CT32 - Temperature is missing Sensor Type information - cannot update sensor status.
Apr-01 09:29:02 Z-Wave Warning Z-Wave Multilevel Sensor device Main Dining Room CT32 - Temperature is missing Sensor Type information - cannot update sensor status.
Apr-01 09:29:02 Z-Wave Warning Z-Wave Multilevel Sensor device Main Dining Room CT32 - Temperature is missing Sensor Type information - cannot update sensor status.
- Is this a nuisance error? I am still receiving temperature updates and I can control through my automated events which is what I care about.
- What is being polled/requested every 22 minutes from the sensor?
- Has any code update in version .298 broken something with this thermostat?
Thanks for any guidance.
Current config info:
Current Date/Time: 2017-04-01 09:44:20
HomeSeer Version: HS3 Standard Edition 3.0.0.313
Operating System: Microsoft Windows 10 Home - Work Station
System Uptime: 6 Days 1 Hour 5 Minutes 25 Seconds
IP Address: 192.168.0.XXX
Number of Devices: 182
Number of Events: 21
Available Threads: 400
Enabled Plug-Ins
3.0.0.15: EnvCan
3.0.0.68: HSTouch Server
1.0.16323.357: MyQ
3.0.1.87: Z-Wave
HomeSeer Version: HS3 Standard Edition 3.0.0.313
Operating System: Microsoft Windows 10 Home - Work Station
System Uptime: 6 Days 1 Hour 5 Minutes 25 Seconds
IP Address: 192.168.0.XXX
Number of Devices: 182
Number of Events: 21
Available Threads: 400
Enabled Plug-Ins
3.0.0.15: EnvCan
3.0.0.68: HSTouch Server
1.0.16323.357: MyQ
3.0.1.87: Z-Wave
Comment