Announcement

Collapse
No announcement yet.

Caseta Plug-in "lost" Smart Bridge IP Addresses

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Caseta Plug-in "lost" Smart Bridge IP Addresses

    donmor,

    Config:
    Current Date/Time: 6/4/2017 9:32:20 AM
    HomeSeer Version: HS3 Pro Edition 3.0.0.318
    Operating System: Microsoft Windows Embedded Standard - Work Station
    System Uptime: 0 Days 19 Hours 13 Minutes 19 Seconds
    IP Address: 10.0.1.2
    Number of Devices: 177
    Number of Events: 34
    Available Threads: 200

    Enabled Plug-Ins
    1.1.7.0: Honeywell WiFi Thermostat
    3.0.0.83: LutronCaseta

    Power outages occur every month or so in my area, especially with Spring storms. We had one on this past Friday evening, 2 Jun. The HomeSeer system came back up as usual, except Telnet did not connect for any of my three Smart Bridge Pro 2 units. Thus no Lutron control was possible. After trying a series of things I noticed that the IP address as indicated in the Homeseer log was NOT correct. I went to the Plug Ins>Lutron Caseta>Config and noticed two things, the IP addresses were blank for each Smart Bridge and none of them were enabled. I enabled all three and put in the correct IP address and all is well.

    Question: Can I expect this from now on with all power fail conditions or was this some sort of anomaly? Is there something I can do to prevent the IP addresses from "disappearing"? Do they have to be re-enabled each time?

    NOTE: In the middle of trouble shooting I went ahead and updated to the latest Plug-in. I think I was at 3.0.0.80 before this latest update.

    Justin in Dallas

    #2
    I'll take a look at it

    Comment

    Working...
    X