Announcement

Collapse
No announcement yet.

HS3 on linux - Slow command response

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HS3 on linux - Slow command response

    Hey Mark
    i have been using HS3 on windows for quite some time now with fairly good insteon module response.
    about 3 weeks ago i ported to linux (finally!!) and got it running pretty fast.
    but it seems that there is a weird slow response when i send a few commands one after the other.
    when i send the first command it starts right away but the second module will response maybe 30-180 seconds later. i will open 3 or 4 open/close modules at the same time and the 4th will be open about 4-5 minutes later.

    what do you need from me to debug it?
    thanks

    #2
    Originally posted by ez1976 View Post
    Hey Mark
    i have been using HS3 on windows for quite some time now with fairly good insteon module response.
    about 3 weeks ago i ported to linux (finally!!) and got it running pretty fast.
    but it seems that there is a weird slow response when i send a few commands one after the other.
    when i send the first command it starts right away but the second module will response maybe 30-180 seconds later. i will open 3 or 4 open/close modules at the same time and the 4th will be open about 4-5 minutes later.

    what do you need from me to debug it?
    thanks
    there may be an issue with triggers and events; a loop or similar; I did this once and it slowed down hs a lot.

    otherwise you can post a detailed log snippet of the transaction; need to see what's going on during the delay
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment


      #3
      Hey Mark
      i set to close 3 shades. well it didnt take 2-3 minutes this time bust still a good few seconds response between them.
      here is the log:
      https://pastebin.com/ww2g0Jc3

      i will try to recreate the delay tomorrow.

      Comment


        #4
        Well for another reason all together i had to move back to windows.
        i again exported and imported the configuration but the delay is gone.
        i am guessing this has something to do with the port to linux

        Comment


          #5
          oh well. thanks for reporting back.
          Mark

          HS3 Pro 4.2.19.5
          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

          Comment


            #6
            Originally posted by mnsandler View Post
            oh well. thanks for reporting back.
            Hey Mark
            considering moving back to linux on a Raspberry pi 3.
            any complains about slow responses?
            should i try the latest version and let you know?
            thanks

            Comment


              #7
              Originally posted by ez1976 View Post
              Hey Mark
              considering moving back to linux on a Raspberry pi 3.
              any complains about slow responses?
              should i try the latest version and let you know?
              thanks
              do real feedback on response. I guess that means its not an issue, otherwise I would have heard.

              give it a go, and report back.
              Mark

              HS3 Pro 4.2.19.5
              Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
              Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
              Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

              Comment


                #8
                sure
                i will time and log starting 3-4 devices at once on both windows and linux.

                Comment


                  #9
                  Hi
                  i bumped up an old thread
                  https://forums.homeseer.com/showthread.php?t=178237


                  i did a full check on my normal windows setup with all the triggers, events and devices

                  and a brand new clean install on ubuntu linux with only 3 devices and your plugin.

                  i posted the detailed logs on both setup and saw a huge difference.

                  Comment

                  Working...
                  X