NOTICE: PHLocation version 1 is no longer being developed or supported due to heavy reliance on Google's API, which was free for personal use at the time of development.
PHLocation2 is currently available as an early beta release and is discussed in this thread. The user guide for PHL2 is in development and you can expect a rough draft bu the end of January 2019. Keep an eye on the above thread and the PHL2 release notes for further information.
Version 3.0.1.109
----------------------------------------
Version 3.0.1.108Version 3.0.1.107Version 3.0.1.90
----------------------------------------
Version 3.0.1.84
----------------------------------------
Version 3.0.1.83
----------------------------------------
Version 3.0.1.82
----------------------------------------
Version 3.0.1.79
----------------------------------------
Version 3.0.1.78
----------------------------------------
Version 3.0.1.77
----------------------------------------
Version 3.0.1.76
----------------------------------------
Version 3.0.1.75
----------------------------------------
Version 3.0.1.71
----------------------------------------
Version 3.0.1.70
----------------------------------------
Version 3.0.1.52
----------------------------------------
Version 3.0.1.51
----------------------------------------
Version 3.0.1.47
----------------------------------------
Version 3.0.1.36
NOTE:
There have been a lot of changes to iCloud support in this version, some of which will affect the way the HS devices associated with an iCloud account operate. If you have iCloud accounts that were configured in a previous version, please hit the Reset VS/VG pairs button on the general config page after installing this version to ensure that all devices are properly configured.
----------------------------------------
Version 3.0.1.17
NOTE 1:
For the new intervals and resume default options to be available on existing iCloud accounts, you must have the Allow
VS/VG pairs option switched on from the plug-in's general config page before installing this version.
NOTE 2:
This update will break any HS events that you have configured to change the refresh interval on an iCloud account. You
will need to open any such events, reselect the refresh interval action and collapse the event.
----------------------------------------
Version 3.0.1.4
----------------------------------------
Version 3.0.1.9
----------------------------------------
Version 3.0.1.7
----------------------------------------
Version 3.0.1.5
----------------------------------------
Version 3.0.1.3
----------------------------------------
Version 3.0.1.2
Just a couple of small fixes over 3.0.1.1
----------------------------------------
PHLocation2 is currently available as an early beta release and is discussed in this thread. The user guide for PHL2 is in development and you can expect a rough draft bu the end of January 2019. Keep an eye on the above thread and the PHL2 release notes for further information.
Version 3.0.1.109
- Fixed - EgiGeoZone fence change events not processed if received via the built in http server.
- Changed - Built in http server is enabled by default following a plug-in update.
----------------------------------------
Version 3.0.1.108Version 3.0.1.107Version 3.0.1.90
- Fixed - Error when Google Elevation Data was not available.
- Fixed - Fence names containing an apostrophe would cause a database recording error.
- Added - Option to suppress Google Distance Matrix lookup errors.
----------------------------------------
Version 3.0.1.84
----------------------------------------
Version 3.0.1.83
----------------------------------------
Version 3.0.1.82
- Fixed - iCloud authentication failures due to change in Apple security requirements.
- Fixed - Hopefully fixed fence names displaying html encoding.
----------------------------------------
Version 3.0.1.79
- Fixed - ID instead of name was being used in message panel and database for Geofency devices.
----------------------------------------
Version 3.0.1.78
- Fixed - Time conversion error if position timestamp received in milliseconds.
- Fixed - Removed orphaned debug log message from maps page.
- Added - Show address only option for position based user devices.
----------------------------------------
Version 3.0.1.77
- Fixed - iCloud conversion error if location services enabled but device is off-line.
- Added - Near any fence child device to fence type users.
- Changed - Nearest known place now considers common places as well as known locations.
- Changed - Improved processing of incoming geofence data.
----------------------------------------
Version 3.0.1.76
- Fixed - Various errors processing iCloud position updates on systems where "," is the decimal separator.
----------------------------------------
Version 3.0.1.75
- Fixed - Error when selecting dynamic map icon on the PHL tab of device config page.
- Fixed - Various GUI cosmetic fixes.
- Added - Ability to enter Google Maps API key on the mapping configuration page.
- Added - All Users static map.
- Changed - Home location feature has been replaced with common places which allows up to 5 common places to be created.
----------------------------------------
Version 3.0.1.71
- Fixed - iCloud 2FA verification would fail unless done one the first device registered to an account.
----------------------------------------
Version 3.0.1.70
----------------------------------------
Version 3.0.1.52
- Fixed - iCloud authentication errors on some Linux distributions.
- Fixed - Date format error on some Linux distributions.
- Changed - User guide is now located on-line.
----------------------------------------
Version 3.0.1.51
- Added - "ForceHttpStart" ini setting to enable http server force start.
- Added - "Tasker" type user device for receiving position data via a Tasker http post action. See here for how to set up.
- Enhancement - Prevented EgiGeoZone tracking test data from updating user devices.
- Fixed - Issue with iCloud where devices could be incorrectly updated with old position data.
- Changed - Fix Type child device now has VS/VG pairs as opposed to just a string value. Requires deleting and rebuilding child devices for any existing Fix Type devices.
- Fixed - Add button not showing on known places page if EGI tracking was the only type of user device configured.
- Fixed - Issue with iCloud device location data being incorrectly identified as old therefore being ignored.
- Fixed - iCloud account polling could cause HS3 to stop processing other events.
----------------------------------------
Version 3.0.1.47
- Fixed - Folder permission issue affecting Linux installations only..
- Fixed - Issue with iCloud account authentication failing if Apple ID or password was changed.
- Added - Support for getting location data into the plug-in via http post from Tasker and other such apps. See user guide for instructions.
----------------------------------------
Version 3.0.1.36
- The majority of changes over version 3.0.1.17 are iCloud service improvements.
- Removed VS/VG pairs rebuilding routine from startup procedure to a user controlled option on the general config page.
- Added support for EgiGeoZone tracking. NOTE: This is only available in the beta version of EgiGeoZone.
NOTE:
There have been a lot of changes to iCloud support in this version, some of which will affect the way the HS devices associated with an iCloud account operate. If you have iCloud accounts that were configured in a previous version, please hit the Reset VS/VG pairs button on the general config page after installing this version to ensure that all devices are properly configured.
----------------------------------------
Version 3.0.1.17
- Added 15, 30, 45 and 60 minute refresh interval options for iCloud accounts.
- Added option to suppress no location log messages for iCloud accounts. This is a per account setting found on the PHL tab of a root iCloud account device. Useful to prevent unwanted log messages when an iCloud account has non location aware devices registered.
- Added option to resume default refresh interval for iCloud accounts.
NOTE 1:
For the new intervals and resume default options to be available on existing iCloud accounts, you must have the Allow
VS/VG pairs option switched on from the plug-in's general config page before installing this version.
NOTE 2:
This update will break any HS events that you have configured to change the refresh interval on an iCloud account. You
will need to open any such events, reselect the refresh interval action and collapse the event.
----------------------------------------
Version 3.0.1.4
- Fixed update interval changes for iCloud accounts not working.
NOTE: Interval changes do not persist over a re-start of HS3 or the plug-in and will revert to the default interval. - Hopefully fixed an issue where the first poll of an iCloud account could produce errors.
- Fixed an issue where forcing a manual update on a paused iCloud account would cause the scheduled polling to resume.
----------------------------------------
Version 3.0.1.9
- Fixed an issue where authentication wasn't working on Linux based systems for incoming POST requests.
- Removed auth bypass feature when plug-in is installed on a Linux system pending further investigation into a potential issue.
----------------------------------------
Version 3.0.1.7
- Changes to iCloud support to stop Apple security email alerts each time the plug-in connects to an iCloud Account.
NOTE: To prevent nag emails a connection to the account must be made at least once every 30 days.
----------------------------------------
Version 3.0.1.5
- Another (hopefully final) fix for latitude / longitude device strings not being set properly. If you have lat / lon devices stuck at "Awaiting Update" then delete the devices from the HS3 device management page, then rebuild the child devices from the PHL tab of the root device to fix.
- Fixed an issue where an inactive iDevice on an iCloud account would cause the discovery of other devices on that account to fail.
----------------------------------------
Version 3.0.1.3
- Fixed issue with latitude and longitude device strings sticking at "Awaiting Update"
----------------------------------------
Version 3.0.1.2
Just a couple of small fixes over 3.0.1.1
- Removed warning status of log message for iCloud account interval changes.
- Fixed # of decimal places not being honoured for latitude and longitude devices.
----------------------------------------
Comment