Announcement

Collapse
No announcement yet.

All Speech doubled

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    All Speech doubled

    Hi Bob,

    I noticed over the last week that my triggers are firing once, but the speech is happening twice. I have a trigger when the front door opens to greet. It has started doubling and sometimes gives 3 greetings. The log shows firing once but the activity log in BLSpeech shows twice.


    Jun-04 14:41:14 EnvisaLinkAdemco INFO Z03 Front Door status change: Closed
    Jun-04 14:41:14 EnvisaLinkAdemco INFO Partition 1 status change: Ready
    Jun-04 14:40:55 TTS Speak: (SPEAKEFAULT):Good afternoon. It is currently 2:40 PM and 78.3 degrees.
    Jun-04 14:40:49 EnvisaLinkAdemco INFO Z08 Sitting Room Motion status change: Opened
    Jun-04 14:40:49 EnvisaLinkAdemco INFO Z07 Living Room Motion status change: Opened
    Jun-04 14:40:49 EnvisaLinkAdemco INFO Z03 Front Door status change: Opened
    Jun-04 14:40:49 Event Event Trigger "Announcements Greeting when Front Door Opens"


    6/4/2017 2:40:56 PM 0 {priority=normal,speaker=Living Room,volume=50,source=3,queue=queue}Good afternoon. It is currently 2:40 PM and 78.3 degrees. Yes SPEAKEFAULT Normal Normal Queue No
    6/4/2017 2:40:41 PM 0 {priority=normal,speaker=Living Room,volume=50,source=3,queue=queue}Good afternoon. It is currently 2:40 PM and 78.3 degrees. Yes SPEAKEFAULT Normal Normal Queue No

    What do you need from me? Debug log?

    I have always had the option in the event set to do not repeat for 20 seconds because it would always repeat until the door shows closed. In the example above, the door closed at 14:41:14 but the speech activity shows 40:41 and again 40:56. This is less than the 20 seconds so it should not have repeated.
    Since there is no second trigger to make it speak again in the log, I assume there is an issue within BLSpeech that is making it speak again.

    Thanks,

    Michael

    I am using .66 version of BLSpeech
    .
    Attached Files
    HS3Pro & HS4Pro on Win2012R2
    Aeotec, Cooper, Cree, GE/Jasco, Intermatic, LIFX, Fortrezz, OSRAM, RCS, Trane, Zooz
    BLBackup, BLGData, BLRussound, BLSpeech, HSTouch, InvisaLink, HSBuddy, IFTTT, JowiHue, NetCAM, PHLocation, Pushover 3P, Random, rnbWeather, UltraLighting3, weatherXML, ZigBee, Z-Wave

    #2
    Are you sure you do not have 2 speech proxies enabled?
    Cheers,
    Bob
    Web site | Help Desk | Feature Requests | Message Board

    Comment


      #3
      I cannot find where I would see if I do. I only have BLSpeech as a proxy. If I shut it off (UnRegister from Options) and open the back door, I get no speech. I do get the log, but nothing spoken.


      Jun-04 18:32:45 TTS Speak (SPEAKEFAULT):{priority=normal,speaker=Kitchen,volume=50} Good evening. It is currently 6:32 PM and 72.1 degrees.
      Jun-04 18:32:44 EnvisaLinkAdemco INFO Z02 Back Doors status change: Closed
      Jun-04 18:32:44 EnvisaLinkAdemco INFO Partition 1 status change: Ready
      Jun-04 18:32:40 Event Event Trigger "Announcements Greeting when Back Door Opens"
      Jun-04 18:32:40 EnvisaLinkAdemco INFO Z02 Back Doors status change: Opened
      HS3Pro & HS4Pro on Win2012R2
      Aeotec, Cooper, Cree, GE/Jasco, Intermatic, LIFX, Fortrezz, OSRAM, RCS, Trane, Zooz
      BLBackup, BLGData, BLRussound, BLSpeech, HSTouch, InvisaLink, HSBuddy, IFTTT, JowiHue, NetCAM, PHLocation, Pushover 3P, Random, rnbWeather, UltraLighting3, weatherXML, ZigBee, Z-Wave

      Comment


        #4
        I up'd the do not repeat in the options of the event from 20 to 30 seconds and this seems to have muted the additional speech events.
        HS3Pro & HS4Pro on Win2012R2
        Aeotec, Cooper, Cree, GE/Jasco, Intermatic, LIFX, Fortrezz, OSRAM, RCS, Trane, Zooz
        BLBackup, BLGData, BLRussound, BLSpeech, HSTouch, InvisaLink, HSBuddy, IFTTT, JowiHue, NetCAM, PHLocation, Pushover 3P, Random, rnbWeather, UltraLighting3, weatherXML, ZigBee, Z-Wave

        Comment

        Working...
        X