I have an RFXrec433E with latest Ext2 firmware and am trying to control a Westinghouse Fan with HS3 but there is no response from the fan, just normal log entries as follows:
Feb-11 07:25:21 RFXCOM 33 (SetIOMulti) set value: 0->ref:1185 ControlType:Button
Feb-11 07:25:21 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to Off (0) by/from: CAPI Control Handler
Feb-11 07:25:19 RFXCOM Error: 33 (decode_Chime) Sound = undefined sound:F
Feb-11 07:25:19 RFXCOM 33 (SetIOMulti) set value: 147->ref:1185 ControlType:Button
Feb-11 07:25:19 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to Light (147) by/from: CAPI Control Handler
Feb-11 07:25:17 RFXCOM 33 (SetIOMulti) set value: 183->ref:1185 ControlType:Button
Feb-11 07:25:17 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to High (183) by/from: CAPI Control Handler
Feb-11 07:25:15 RFXCOM 33 (SetIOMulti) set value: 184->ref:1185 ControlType:Button
Feb-11 07:25:15 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to Medium (184) by/from: CAPI Control Handler
Feb-11 07:25:12 RFXCOM 33 (SetIOMulti) set value: 185->ref:1185 ControlType:Button
Feb-11 07:25:12 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to Low (185) by/from: CAPI Control Handler
I can control the fan with RFXmngr on its own (same com port) absolutely fine so I doubt that it is a problem with my RFXrec433E.
In HS3 the Fan device appears to have been created correctly as per the attached pic, but there is no control via HS3.
The only other devices I'm using the RFXrec433E for are a Byron Bell and a Somfy blind.
Both work perfectly.
I'm on Win10 64 Bit.
Any ideas anyone?
Feb-11 07:25:21 RFXCOM 33 (SetIOMulti) set value: 0->ref:1185 ControlType:Button
Feb-11 07:25:21 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to Off (0) by/from: CAPI Control Handler
Feb-11 07:25:19 RFXCOM Error: 33 (decode_Chime) Sound = undefined sound:F
Feb-11 07:25:19 RFXCOM 33 (SetIOMulti) set value: 147->ref:1185 ControlType:Button
Feb-11 07:25:19 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to Light (147) by/from: CAPI Control Handler
Feb-11 07:25:17 RFXCOM 33 (SetIOMulti) set value: 183->ref:1185 ControlType:Button
Feb-11 07:25:17 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to High (183) by/from: CAPI Control Handler
Feb-11 07:25:15 RFXCOM 33 (SetIOMulti) set value: 184->ref:1185 ControlType:Button
Feb-11 07:25:15 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to Medium (184) by/from: CAPI Control Handler
Feb-11 07:25:12 RFXCOM 33 (SetIOMulti) set value: 185->ref:1185 ControlType:Button
Feb-11 07:25:12 Device Control Device: RFXCOM RFXCOM Fan Master Bedroom to Low (185) by/from: CAPI Control Handler
I can control the fan with RFXmngr on its own (same com port) absolutely fine so I doubt that it is a problem with my RFXrec433E.
In HS3 the Fan device appears to have been created correctly as per the attached pic, but there is no control via HS3.
The only other devices I'm using the RFXrec433E for are a Byron Bell and a Somfy blind.
Both work perfectly.
I'm on Win10 64 Bit.
Any ideas anyone?
Comment