Discussions related to HomeSeer Beta builds 3.0.0.369->3.0.0.423

[ServiceXp]

Ok So I checked all PI's logging level. I found 2 with logging (to file) set to debug. Shut the logging down completely for those apps. I shut down HS3; renamed the HS3 log file and restarted. Not sure how logging to file would cause this, but....

So after ~7 hrs It looks like the Virtual Memory may be creeping up again.. The only changes I know I've made was add 3 motion sensors and Spuds CC PI. And a couple of events that working with those item's.

Current Date/Time: 3/20/2018 4:44:50 PM
HomeSeer Version: HS3 Pro Edition 3.0.0.423
Operating System: Microsoft Windows 10 Pro - Work Station
System Uptime: 0 Days 7 Hours 24 Minutes 9 Seconds
IP Address: 192.168.1.26
Number of Devices: 658
Number of Events: 182
Available Threads: 1200
HSTouch Enabled: True
Event Threads: 2
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed: Windows Defender

Enabled Plug-Ins
3.3.0.0: APCUPSD
2.0.54.0: BLBackup
3.0.11.0: BLLock
2.0.35.0: BLSecurity
3.1.1.24385: Blue-Iris
3.0.0.17: Chromecast
1.2.2.0: Device History
3.0.0.44: EasyTrigger
3.7.1.0: Harmony Hub
3.7.1.0: Harmony Hub
1.2.1.0: Honeywell WiFi Thermostat
3.0.0.28: ImperiHome
1.5.0.0: MQTT
1.0.5687.23871: MySensors
3.0.1.109: PHLocation
0.0.0.38: Pushover 3P
1.0.0.7: Restart
30.0.0.36: RFXCOM
3.0.5.7: SDJ-Health
3.0.6554.33094: UltraMon3
3.0.0.83: weatherXML
3.0.1.206: Z-Wave

[concordseer]

Permissions issue possibly or is the database corrupted. Do you have a restore point or a backup you could restore prior to the problem.

[Eman]

Do you have any of Jon00's plugins like Jon00Graphing running?
Jon's plugins never get listed and if you get their settings wrong like timing in events when a script runs you will get excessive logging!


Eman.

[Eman]

Another trick is to restore the HomeSeer to an earlier point as @concordseer says and also repair the system with the same .exe HomeSeer installer. But with this, care must be taken of your licenses.bin file that you don't lose it! Save it first then repair and replace it after and restart the system.



Eman.

[ServiceXp]

Permissions issue possibly or is the database corrupted. Do you have a restore point or a backup you could restore prior to the problem.

Do you have any of Jon00's plugins like Jon00Graphing running?
Jon's plugins never get listed and if you get their settings wrong like timing in events when a script runs you will get excessive logging!


Eman.

Another trick is to restore the HomeSeer to an earlier point as @concordseer says and also repair the system with the same .exe HomeSeer installer. But with this, care must be taken of your licenses.bin file that you don't lose it! Save it first then repair and replace it after and restart the system.

Eman.

Thanks guys, I do have Jon00Graphing running, but I haven't touched it in a while (like at least a year), but will check it out to make sure I didn't somehow screw it up.

I have backup's but at this point I would only pull that ripcord if absolutely necessary. I'd rather try and find the source of the problem if at all possible.

[racerfern]

Why is the Harmony Hub PI listed twice?

[ServiceXp]

Why is the Harmony Hub PI listed twice?

One for each Hub

Sent from my ASUS_Z00AD using Tapatalk

[efrey]

Here is a 5 1/2 day capture of HSConsole.exe memory usage for beta release 423 (w/ Zwave 3.0.1.190) on an HS3 ZEE S2.

The data indicates a memory leak remains. Although the memory usage levels off after about 3 days, but the trend remains upward.

My bet is that this is a mono problem given others on this forum who don't see this behavior when running the latest mono 5.x release. I agree with previous posts requesting an updated Zee image with the latest Mono included. FWIW, I made several attempts attempting to upgrade mono, and despite help from others on this forum, concluded it was nearly impossible to upgrade mono because of how it is built into the Zee Z2 Linux image.

-------------
Current Date/Time: 3/22/2018 9:02:25 AM
HomeSeer Version: HS3 ZEE S2 Edition 3.0.0.423
Linux version: Linux HTZeeS2V2-4015 4.1.19-v7+ #858 SMP Tue Mar 15 15:56:00 GMT 2016 armv7l GNU/Linux System Uptime: 5 Days 11 Hours 25 Minutes 0 Seconds
IP Address: 10.0.0.129
Number of Devices: 28
Number of Events: 40
Available Threads: 396
HSTouch Enabled: True
Event Threads: 789
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed:

Enabled Plug-Ins
3.0.1.190: Z-Wave

[TechFan]

ZWave broke again last night after HSConsole ate up all the memory again. . .I wish mine would stay around the 200MB level. . .it is going over 850MB in a 4-5 days.

[bdickhaus]

I am seeing the memory rise in .423 as well. I am running Ubuntu 16.04.4 with Mono 5.10.0.160. Could it have something to do with the log file maintenance? I was going to try and figure out which release to go back to before that was re-enabled.

Current Date/Time: 3/22/2018 11:57:35 AM
HomeSeer Version: HS3 Pro Edition 3.0.0.423
Linux version: Linux rock64 4.4.77-rockchip-ayufan-136 #1 SMP Thu Oct 12 09:14:48 UTC 2017 aarch64 aarch64 aarch64 GNU/Linux System Uptime: 6 Days 14 Hours 13 Minutes 17 Seconds
IP Address: 192.168.2.236
Number of Devices: 411
Number of Events: 235
Available Threads: 399
HSTouch Enabled: True
Event Threads: 0
Event Trigger Eval Queue: 0
Event Trigger Priority Eval Queue: 0
Device Exec Queue: 0
HSTouch Event Queue: 0
Email Send Queue: 0
Anti Virus Installed:

Enabled Plug-Ins
2.0.54.0: BLBackup
2.0.39.0: BLLAN
2.0.93.0: BLRF
2.0.75.0: BLSpeech
1.2.2.0: Device History
3.0.0.44: EasyTrigger
2.0.2.0: JowiHue
3.1.3.0: mcsMQTT
3.0.1.90: PHLocation
30.0.0.36: RFXCOM
3.0.5.7: SDJ-Health
3.0.0.79: weatherXML
3.0.1.206: Z-Wave

[The Profit]

I am seeing the memory rise in .423 as well. I am running Ubuntu 16.04.4 with Mono 5.10.0.160. Could it have something to do with the log file maintenance? I was going to try and figure out which release to go back to before that was re-enabled.



Current Date/Time: 3/22/2018 11:57:35 AM

HomeSeer Version: HS3 Pro Edition 3.0.0.423

Linux version: Linux rock64 4.4.77-rockchip-ayufan-136 #1 SMP Thu Oct 12 09:14:48 UTC 2017 aarch64 aarch64 aarch64 GNU/Linux System Uptime: 6 Days 14 Hours 13 Minutes 17 Seconds

IP Address: 192.168.2.236

Number of Devices: 411

Number of Events: 235

Available Threads: 399

HSTouch Enabled: True

Event Threads: 0

Event Trigger Eval Queue: 0

Event Trigger Priority Eval Queue: 0

Device Exec Queue: 0

HSTouch Event Queue: 0

Email Send Queue: 0

Anti Virus Installed:



Enabled Plug-Ins

2.0.54.0: BLBackup

2.0.39.0: BLLAN

2.0.93.0: BLRF

2.0.75.0: BLSpeech

1.2.2.0: Device History

3.0.0.44: EasyTrigger

2.0.2.0: JowiHue

3.1.3.0: mcsMQTT

3.0.1.90: PHLocation

30.0.0.36: RFXCOM

3.0.5.7: SDJ-Health

3.0.0.79: weatherXML

3.0.1.206: Z-Wave

I believe it was .420 that the log maint was still turned off.


HS3 3.0.0.420 & HSTouch 3.0.55 with 700 Devices, 358 Events
Plugin's:
BLBackup, BLOccupied, BLShutdown, EasyTrigger, Ecobee,
EnvisaLink DSC, PHLocation, Pushover, SONOS, Blue Iris, UltraRachio3,
weatherXML, Jon00 Alexa Helper, Network Monitor, Z-Wave 3.0.1.200

[John245]

I believe it was .420 that the log maint was still turned off.


HS3 3.0.0.420 & HSTouch 3.0.55 with 700 Devices, 358 Events
Plugin's:
BLBackup, BLOccupied, BLShutdown, EasyTrigger, Ecobee,
EnvisaLink DSC, PHLocation, Pushover, SONOS, Blue Iris, UltraRachio3,
weatherXML, Jon00 Alexa Helper, Network Monitor, Z-Wave 3.0.1.200

[Malosa]

here i am again,

still no problems and see the prefmon from jon,

Low: 5.01 High: 17.03 Av: 5.88 Homeseer hs3 usage


i only see a memory increase but thats it, nothing strange going on on windows 7 x64.

Hi all ,

my system is running 1 Day 1 Hour 4 Minutes 16 Seconds.
i didn't have any problems.
i did go from 315 to 423.
.315 i had almost 1 year running with no errors but constant working on the server.

i have now a very low cpu usage and nothing weird detected.
its even a lower cpu usage then my old version.

this is what i have enabled :
Random:,Restart:,Plugwise Pro:,BULLET:,PHLocation:,RFXCOM:,EasyTrigger:,Pushover 3P:,UltraLog3:,JsonConfigForHomekit:,MQTT:,BLXbox:,BLBackup: ,UltraWeatherWU3:,SCSIP:

also a lot of scrips from jon running from every 10 seconds till 3 minutes every time, and also every 5 minutes and realtime output for my own created charts from highstock...

till now not even 1 error or high cpu.
min cpu for homeseer is 2 and high is 8.

i don't use z-wave so i can't test it.

(i wil report back in 1 week)


regards

[ServiceXp]

It's a risen'

.

[Eman]

If you have Jon00 plugins running and working correctly, turn off their logging in the settings so you can rule them out and concentrate on the zwave plugin ====> There is a beta zwve .206 to try as well.



Eman.