Announcement

Collapse
No announcement yet.

Keypadlinc - Buttons not in sync with HS

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #76
    Originally posted by aldo View Post
    I installed the new plugin,I'm getting "7/24/2010 5:19:39 PM - Insteon - Sending command 02 62 15 0D 4E 05 19 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False." Not sure what to do at this point. I'm attaching the error log. Your input is always very much appreciated.

    Thanks,
    Aldo
    Aldo,
    that is just a status request msg to the following device
    DeviceID=15.0D.4E
    DeviceName=Fireplace Light Switch

    what exactly is the problem?
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment


      #77
      I can't talk with these devices anymore thru the plugin. It goes Reading remote link database record for device ID 15.0D.8D record # 1, attempt # 3...
      The link tables and device settings could not be retrieved for your device. Same problem with all these ICONS below.
      The link tables and device settings for device(s):
      0F.5A.65
      15.0D.74
      15.0D.8D
      15.0A.B0
      15.0D.4E
      15.0A.AE
      Could not be downloaded. 10 devices were updated

      Thanks,
      Aldo

      Comment


        #78
        Aldo,
        try this build. I had a few others with issues related to icon devices.

        Please feel free to start a new thread for issues outside the current topic.
        Attached Files
        Mark

        HS3 Pro 4.2.19.5
        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

        Comment


          #79
          We are making great progress. It fixed the problem, I'm able to talk with these devices but I'm getting these errors on the KeypadLinc and the debugger still give me this message 7/26/2010 8:27:10 PM - Insteon - Sending command 02 62 15 17 59 05 19 01 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False. Is this normal?
          Thanks,
          Aldo


          <TABLE border=0 cellSpacing=1 cellPadding=0 width=0%><TBODY><TR><TD>Link #15</TD><TD>Button A is controlled by HomeSeer using PLM Database Link #2 (Bad Link Entry, unreferenced link #) - Command: On</TD></TR><TR><TD>Link #8</TD><TD>Button A is controlled by HomeSeer using PLM Database Link #3 (Bad Link Entry, unreferenced link #) - Command: On</TD></TR><TR><TD>Link #16</TD><TD>Button B is controlled by HomeSeer using PLM Database Link #3 (Bad Link Entry, unreferenced link #) - Command: On</TD></TR><TR><TD>Link #9</TD><TD>Button B is controlled by HomeSeer using PLM Database Link #4 (Bad Link Entry, unreferenced link #) - Command: On</TD></TR></TBODY></TABLE>

          Comment


            #80
            Originally posted by aldo View Post
            We are making great progress. It fixed the problem, I'm able to talk with these devices but I'm getting these errors on the KeypadLinc and the debugger still give me this message 7/26/2010 8:27:10 PM - Insteon - Sending command 02 62 15 17 59 05 19 01 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False. Is this normal?
            Thanks,
            Aldo


            <TABLE border=0 cellSpacing=1 cellPadding=0 width=0%><TBODY><TR><TD>Link #15</TD><TD>Button A is controlled by HomeSeer using PLM Database Link #2 (Bad Link Entry, unreferenced link #) - Command: On</TD></TR><TR><TD>Link #8</TD><TD>Button A is controlled by HomeSeer using PLM Database Link #3 (Bad Link Entry, unreferenced link #) - Command: On</TD></TR><TR><TD>Link #16</TD><TD>Button B is controlled by HomeSeer using PLM Database Link #3 (Bad Link Entry, unreferenced link #) - Command: On</TD></TR><TR><TD>Link #9</TD><TD>Button B is controlled by HomeSeer using PLM Database Link #4 (Bad Link Entry, unreferenced link #) - Command: On</TD></TR></TBODY></TABLE>
            the log msg is valid.

            delete these links and reprogram the device for homeseer
            Mark

            HS3 Pro 4.2.19.5
            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
            Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

            Comment


              #81
              I canot get a keypadlinc button light to sync with HS... can you tell me what I need to set, and to be looking for to ensure it is correct?

              thx

              Comment


                #82
                Originally posted by Ltek View Post
                I canot get a keypadlinc button light to sync with HS... can you tell me what I need to set, and to be looking for to ensure it is correct?

                thx
                you need to use the 'program device for homeseer' btn on the device edit page. one of the links is missing. if you get get dups after you finish, post the device section from the ini and i can tell you which links to delete
                Mark

                HS3 Pro 4.2.19.5
                Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                Comment


                  #83
                  Mark,
                  Does this looks correct...

                  Device Link Table

                  <TABLE border=0 cellSpacing=1 cellPadding=0 width=0%><TBODY><TR><TD>Link #14</TD><TD>Button A controls Kitchen Espresso Machine (01.03.CC)</TD></TR><TR><TD>Link #2</TD><TD>Button A has local control reporting to HomeSeer</TD></TR><TR><TD>Link #3</TD><TD>Button B has local control reporting to HomeSeer</TD></TR><TR><TD>Link #4</TD><TD>Button C has local control reporting to HomeSeer</TD></TR><TR><TD>Link #5</TD><TD>Button D has local control reporting to HomeSeer</TD></TR><TR><TD>Link #6</TD><TD>Button Off has local control reporting to HomeSeer</TD></TR><TR><TD>Link #1</TD><TD>Button On/Load has local control reporting to HomeSeer</TD></TR><TR><TD>Link #9</TD><TD>Button A is controlled by HomeSeer using PLM Database Link #9 (Button Control Group) - Command: On</TD></TR><TR><TD>Link #10</TD><TD>Button B is controlled by HomeSeer using PLM Database Link #10 (Button Control Group) - Command: On</TD></TR><TR><TD>Link #11</TD><TD>Button C is controlled by HomeSeer using PLM Database Link #11 (Button Control Group) - Command: On</TD></TR><TR><TD>Link #12</TD><TD>Button D is controlled by HomeSeer using PLM Database Link #12 (Button Control Group) - Command: On</TD></TR><TR><TD>Link #13</TD><TD>Button Off is controlled by HomeSeer using PLM Database Link #13 (Button Control Group) - Command: On</TD></TR><TR><TD>Link #7</TD><TD>Button On/Load is controlled by HomeSeer using PLM Database Link #254 HomeSeer 'All Devices Group' - On Level 100%, Ramp Rate .1 Sec.</TD></TR><TR><TD>Link #8</TD><TD>Button On/Load is controlled by HomeSeer using PLM Database Link #8 (Button Control Group) - On Level 100%, Ramp Rate .1 Sec.</TD></TR></TBODY></TABLE>

                  Comment


                    #84
                    this looks correct. is the kpl responding to hs correctly now? if not, my last suggestion is to reset the device (check the device manual) and reprogram as you just did
                    Mark

                    HS3 Pro 4.2.19.5
                    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                    Comment


                      #85
                      On the same token, I'm having similar issues and I can't seem to fix them. Garage door not working properly, KPL not sync. properly. I do not think it is your plugin but how do a reset all Insteon devices and restart from zero, including resetting the insteon ini file.

                      Thanks,
                      Aldo

                      Comment


                        #86
                        Originally posted by aldo View Post
                        On the same token, I'm having similar issues and I can't seem to fix them. Garage door not working properly, KPL not sync. properly. I do not think it is your plugin but how do a reset all Insteon devices and restart from zero, including resetting the insteon ini file.

                        Thanks,
                        Aldo
                        each device must be reset manually. it is not possible for me to reset a device via the plugin (i checked).

                        So, try starting with just one device like the kpl:

                        delete it from the plugin (this will remove it from the ini as well)
                        reset it based on the user's guide avail @ smarthome.com
                        readd it to the plugin

                        if you get a lot of warnings in the log when starting hs, you shoudl focus on those devices as well.
                        Mark

                        HS3 Pro 4.2.19.5
                        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                        Comment

                        Working...
                        X