www.homeseer.com    
 

Go Back   HomeSeer Message Board > Lighting & Primary Technology Plug-ins > Lighting & Primary Technology Discussion > Insteon Plug-in (Mark Sandler)

Insteon Plug-in (Mark Sandler) Discussions related to Mark Sandler's 3rd parth plug-in for controlling Insteon devices via Smarthome's PLM interfaces (the 2412 & 2413 series controllers)

Reply
 
Thread Tools Display Modes
  #1  
Old August 28th, 2010, 12:33 AM
skozin's Avatar
skozin skozin is offline
Seer Master
 
Join Date: Oct 2002
Location: Buffalo Grove, IL
Posts: 627
Problem with new keypadlinc switch

I just received a new Keypadlinc today from Smarthome and tried to program the switch and received a message:

8/27/2010 11:21:16 PM Insteon ** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files (x86)\Homeseer HS2\Config\Insteon Error Report.Log
8/27/2010 11:21:16 PM Insteon ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
8/27
8/27/2010 11:24:32 PM Insteon WARNING: The GroupLinkAddress INI section for device 25(16.E4.05) is corrupted. Please delete and re-add your device!
8/27/2010 11:24:32 PM Insteon WARNING: The GroupLinkAddress INI section for device 25(16.E4.05) is corrupted. Please delete and re-add your device!
8/27/2010 11:26:25 PM Insteon ** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files (x86)\Homeseer HS2\Config\Insteon Error Report.Log
8/27/2010 11:26:25 PM Insteon ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.


I noticed that when I programmed the switch (It is an 8 button switch) the switch programmed as a 6 button, so I changed it to 8 button and here is my Device Link Table:

Device Link Table

Link #1 Button A/Load has local control reporting to HomeSeer
Link #2 Button B has local control reporting to HomeSeer
Link #3 Button C has local control reporting to HomeSeer
Link #4 Button D has local control reporting to HomeSeer
Link #5 Button E has local control reporting to HomeSeer
Link #6 Button F has local control reporting to HomeSeer
Link #7 Button G has local control reporting to HomeSeer
Link #8 Button H has local control reporting to HomeSeer
Link #10 Button A/Load is controlled by HomeSeer using PLM Database Link #19 (Button Control Group) - On Level 100%, Ramp Rate .1 Sec.
Link #9 Button A/Load is controlled by HomeSeer using PLM Database Link #254 HomeSeer 'All Devices Group' - On Level 100%, Ramp Rate .1 Sec.
Link #11 Button B is controlled by HomeSeer using PLM Database Link #20 (Button Control Group) - Command: On
Link #12 Button C is controlled by HomeSeer using PLM Database Link #21 (Button Control Group) - Command: On
Link #13 Button D is controlled by HomeSeer using PLM Database Link #22 (Button Control Group) - Command: On
Link #14 Button E is controlled by HomeSeer using PLM Database Link #23 (Button Control Group) - Command: On
Link #15 Button F is controlled by HomeSeer using PLM Database Link #24 (Button Control Group) - Command: On

As you can see, I am missing Button G and H. I tried to reread the links or program the links, but no good.

Device Type: KeypadLinc V2 Dimmer
Firmware Version: 36
Comm Reliability: 100% (0 failed out of 62 cmds)
Resume dim mode: False
Default local on level: 100%

Also this must be a new version switch 011c

[Device 25]
DeviceID=16.E4.05
DeviceName=Hallway Keypad
DeviceLocation=Insteon
PollingInterval=0
DeviceType=011C
FirmwareVer=36
DatabaseDelta=127
LinksDownloaded=1
EEValues=DefaultRampRate=31,ResumeDim=128,DefaultOnLevel=255 ,OnLEDMask1=0,OnLEDMask2=0,OnLEDMask3=0,OnLEDMask4=0,OnLEDMa sk5=0,OnLEDMask6=0,OnLEDMask7=0,OnLEDMask8=0,OffLEDMask1=0,O ffLEDMask2=0,OffLEDMask3=0,OffLEDMask4=0,OffLEDMask5=0,OffLE DMask6=0,OffLEDMask7=0,OffLEDMask8=0,NonToggleButtons=0,OpFl ags1=8
GroupLinkAddress 1=19
GroupLinkAddress 2=20
GroupLinkAddress 3=21
GroupLinkAddress 4=22
GroupLinkAddress 5=23
GroupLinkAddress 6=24
Protocol=2
LastContact=8/27/2010 11:54:14 PM
NumLinks=15
RecentDatabaseDelta=127
Link 1=E2 01 0F D4 EF FF 1F 01 1
Link 2=E2 02 0F D4 EF FF 1F 02 2
Link 3=E2 03 0F D4 EF FF 1F 03 3
Link 4=E2 04 0F D4 EF FF 1F 04 4
Link 5=E2 05 0F D4 EF FF 1F 05 5
Link 6=E2 06 0F D4 EF FF 1F 06 6
Link 7=E2 07 0F D4 EF FF 1F 07 7
Link 8=E2 08 0F D4 EF FF 1F 08 8
Link 9=A2 FE 0F D4 EF FF 1F 01 9
Link 10=A2 13 0F D4 EF FF 1F 01 10
Link 11=A2 14 0F D4 EF FF 1F 02 11
Link 12=A2 15 0F D4 EF FF 1F 03 12
Link 13=A2 16 0F D4 EF FF 1F 04 13
Link 14=A2 17 0F D4 EF FF 1F 05 14
Link 15=A2 18 0F D4 EF FF 1F 06 15

Any suggestions?
Attached Files
File Type: zip Insteon Error Report .zip (151.2 KB, 4 views)

Last edited by skozin; August 28th, 2010 at 01:01 AM.
Reply With Quote
  #2  
Old August 28th, 2010, 08:42 AM
mnsandler's Avatar
mnsandler mnsandler is offline
Insteon Overlord
 
Join Date: Apr 2005
Location: Virginia
Posts: 10,597
yah, been having problems with 8btn kpls

please do the following

shutdown hs
edit the insteon.ini and add the following to the device section for the new kpl

GroupLinkAddress 7=25
GroupLinkAddress 8=26


then restart hs

and use the program for homeseer btn to fix the missing links

please let me know if this resolves the problem
__________________
Mark

HS3 Pro 3.0.0.368
Hardware: Insteon Serial PLM | Vista Alarm 20P with AD2USB | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
Plugins: Insteon 3.0.6.23 (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire | RFXCOM | NetCAM | MyQ | BLRadar | Jon00 Charting
Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory
Reply With Quote
  #3  
Old August 29th, 2010, 12:32 AM
skozin's Avatar
skozin skozin is offline
Seer Master
 
Join Date: Oct 2002
Location: Buffalo Grove, IL
Posts: 627
All links are back, but later this evening the 2 links were missing again. I reinstalled them and will check tomorrow to see if all is well.

Thanks,
Steve
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:20 PM.


Copyright HomeSeer Technologies, LLC