Announcement

Collapse
No announcement yet.

xapmcs1Wire - 1 Wire (DS9097U / DS9490D) xAP Node

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #91
    Hi Michael,

    I had a chat with Matisere,
    I guess he's trying to slow down some of the pollings as well. If he can get the temp. only every 10 mins, then going through the critical devices (switches, ...) will go faster as there are less to poll ?

    Is it now possible to change polling freq on a per device base?
    br,
    Migube

    Comment


      #92
      All devices are polled at the primary polling rate. The 01,05,12, and 29 family devices are polled at the switch rate. The DS2405 is a family 05 device. No provisions exist to assign individual rates to sensors.

      Comment


        #93
        run-time error 13 Type Mismatch

        Hello,
        When i launch the setup menu on the XAPMcs1Wire, i get this error :
        Run-time error "13" : Type mismatch

        i have a DS9490 module which is well installed, the onewireviewer of the maxim-ic web site return to me all mine dallas modules.
        someboby have a good idea ?

        Thank's

        Fabrice

        Comment


          #94
          From the tray icon there is a browser-based setup and a window-based setup. Are either of these the ones you are using? Where does the error message appear? If it is in an xAP message then there should also be a procedure name and line number that will provide more insight into the source of the error.

          Comment


            #95
            Hello

            My error appears when i use the window-based setup, you can find the 2 screens copies. browser-based setup with no error, and window-based setup with the error.

            thank's
            Attached Files

            Comment


              #96
              Zip up and post the contents of your xapmcs1Wire\Config folder. Info in this folder is what is used by setup

              Comment


                #97
                Hello,
                This is my config folder.
                There is not a lot of information in my folder ...

                Fabrice.
                Attached Files

                Comment


                  #98
                  You are correct, you are not getting out of the starting gate. Error messages are delivered using the Homeseer.Event/Event.Log xAP schema. With the xAP message viewer look at the output generated by xapmcs1Wire as it starts up.

                  Comment


                    #99
                    this is the XAP message i can see in the viewer :

                    xap-header
                    {
                    v=12
                    hop=1
                    uid=FF000500
                    class=Homeseer.Event
                    source=mcs.OneWire.BTW44310
                    }
                    Event.Log
                    {
                    Time=28/02/2006 20:39:27
                    Type=xapmcs1Wire
                    Data= InitHW: Line 70 ActiveX component can't create object
                    }

                    Comment


                      The one wire drivers were being accessed before being downloaded. I posted an update that sould fix this. V1.10.3

                      Comment


                        Thank's for the update, we are on the good way.
                        Now, it's possible to launch the windows-based setup.

                        When i click on the "poll for adapters" button, the interface does not detect my DS9490 (it is well detect by the "default 1-wire Net" software from Maxim)==> the xap viewer return this text :
                        xap-header
                        {
                        v=12
                        hop=1
                        uid=FF000500
                        class=Homeseer.Config
                        source=mcs.OneWire.BTW44310
                        }
                        Config.Notification
                        {
                        Index=0
                        File=mcsXap1Wire.ini
                        Section=OneWire
                        Key=DSPort
                        Value=
                        }


                        This error is visible in the Xap Viewer:
                        xap-header
                        {
                        v=12
                        hop=1
                        uid=FF000500
                        class=Homeseer.Event
                        source=mcs.OneWire.BTW44310
                        }
                        Event.Log
                        {
                        Time=28/02/2006 22:57:56
                        Type=xapmcs1Wire
                        Data=SetIniValue Line 460 ActiveX component can't create object
                        }

                        Comment


                          In mcsTemperature I download drivers if they are not installed. I thought I had done this with xapmcs1wire as well, but I had not. I added this to the V1.10.4 posting. Note also that if you are running XP that you will likely also need to download the Microsoft Java VM. There have been some recent posts in this or a related forum on getting it.

                          Comment


                            I'm using the 5.00.3810 java version of Microsoft.

                            A new error :

                            xap-header
                            {
                            v=12
                            hop=1
                            uid=FF000500
                            class=Homeseer.Event
                            source=mcs.OneWire.BTW44310
                            }
                            Event.Log
                            {
                            Time=01/03/2006 16:54:34
                            Type=xapmcs1Wire
                            Data=SetIniValue Line 780 Object variable or With block variable not set
                            }
                            this error appear just after the click on the message about "1-wire drivers ....interface"



                            "Poll for adapters" is always empty.

                            Comment


                              The location that I'm using for the download is
                              ftp://ftp.dalsemi.com/pub/auto_id/li...ers_v400b4.msi
                              It will take a few minutes and then a Windows installer started which requires some interaction from you. If you are not getting the drivers autodownload and installed, then just do it manually to install the drivers. Part of the process is to identify the type of interface (DS9490) and its USB port.

                              Comment


                                Yes !!!!
                                my driver version was ftp://ftp.dalsemi.com/pub/auto_id/li...ivers_v400.msi
                                and not ftp://ftp.dalsemi.com/pub/auto_id/li...ers_v400b4.msi

                                I'd uninstalled the first one to put the beta version, my adapter is well detected.


                                Thank's for your work !
                                Fabrice

                                Comment

                                Working...
                                X