I use HomeTroller Series 3 with PLCBUS interface 1141 to control my PLCBUS modules. I have a very strange problem with the PLCBUS plug-in. During the controller startup, the plcbus plug-in initialized successfully and working fine. But this is function will not last more than 1 or 2 days and stop working. Seem like the communication between the controller and the plcbus interface 1141 has broken. I need to restart the homeseer controller to make the plcbus back to normal again. This always happens (almost) everyday, the controller stop communication with PLCBUS interface 1141.
Does anyone in this forum has any experience with this kind of problem?
Any advice and comment will be much appreciated.
Thanks in advance.
Benny Harlindong.
Below is the part of my homeseer log file showing the respond from plcbus interface stopped after 8/10/2012 11:30:03 AM
(Address P1 is dummy address to show whether the communication between the PLCBUS connector and the interface okay or not) :
8/10/2012 12:15:00 PM* Device Control* Device: Toggle state (P1) ON
8/10/2012 12:15:00 PM* Event* Event Trigger "Trial 2 - ON"
8/10/2012 12:00:10 PM* Device Control* Device: Toggle state (P1) OFF
8/10/2012 12:00:10 PM* Event* Event Trigger "Trial 1 - OFF"
8/10/2012 11:45:00 AM* Device Control* Device: Toggle state (P1) ON
8/10/2012 11:45:00 AM* Event* Event Trigger "Trial 4 - ON"
8/10/2012 11:30:03 AM* PLCBUS Error* Too long wait for Ack response to command: (255) P1 Off Data1:0 Data2:0 Tx:False AckReq:True Ack:False IDreq:False Id:False 3PhReq:False RiscOK:False PlcBusOK:False
8/10/2012 11:30:00 AM* Device Control* Device: Toggle state (P1) OFF
8/10/2012 11:30:00 AM* Event* Event Trigger "Trial 3 - OFF"
8/10/2012 11:15:03 AM* PLCBUS Error* Too long wait for Ack response to command: (255) P1 On Data1:0 Data2:0 Tx:False AckReq:True Ack:False IDreq:False Id:False 3PhReq:False RiscOK:False PlcBusOK:False
8/10/2012 11:15:00 AM* Device Control* Device: Toggle state (P1) ON
8/10/2012 11:15:00 AM* Event* Event Trigger "Trial 2 - ON"
8/10/2012 11:00:13 AM* PLCBUS Error* Too long wait for Ack response to command: (255) P1 Off Data1:0 Data2:0 Tx:False AckReq:True Ack:False IDreq:False Id:False 3PhReq:False RiscOK:False PlcBusOK:False
8/10/2012 11:00:10 AM* Device Control* Device: Toggle state (P1) OFF
8/10/2012 11:00:10 AM* Event* Event Trigger "Trial 1 - OFF"
Does anyone in this forum has any experience with this kind of problem?
Any advice and comment will be much appreciated.
Thanks in advance.
Benny Harlindong.
Below is the part of my homeseer log file showing the respond from plcbus interface stopped after 8/10/2012 11:30:03 AM
(Address P1 is dummy address to show whether the communication between the PLCBUS connector and the interface okay or not) :
8/10/2012 12:15:00 PM* Device Control* Device: Toggle state (P1) ON
8/10/2012 12:15:00 PM* Event* Event Trigger "Trial 2 - ON"
8/10/2012 12:00:10 PM* Device Control* Device: Toggle state (P1) OFF
8/10/2012 12:00:10 PM* Event* Event Trigger "Trial 1 - OFF"
8/10/2012 11:45:00 AM* Device Control* Device: Toggle state (P1) ON
8/10/2012 11:45:00 AM* Event* Event Trigger "Trial 4 - ON"
8/10/2012 11:30:03 AM* PLCBUS Error* Too long wait for Ack response to command: (255) P1 Off Data1:0 Data2:0 Tx:False AckReq:True Ack:False IDreq:False Id:False 3PhReq:False RiscOK:False PlcBusOK:False
8/10/2012 11:30:00 AM* Device Control* Device: Toggle state (P1) OFF
8/10/2012 11:30:00 AM* Event* Event Trigger "Trial 3 - OFF"
8/10/2012 11:15:03 AM* PLCBUS Error* Too long wait for Ack response to command: (255) P1 On Data1:0 Data2:0 Tx:False AckReq:True Ack:False IDreq:False Id:False 3PhReq:False RiscOK:False PlcBusOK:False
8/10/2012 11:15:00 AM* Device Control* Device: Toggle state (P1) ON
8/10/2012 11:15:00 AM* Event* Event Trigger "Trial 2 - ON"
8/10/2012 11:00:13 AM* PLCBUS Error* Too long wait for Ack response to command: (255) P1 Off Data1:0 Data2:0 Tx:False AckReq:True Ack:False IDreq:False Id:False 3PhReq:False RiscOK:False PlcBusOK:False
8/10/2012 11:00:10 AM* Device Control* Device: Toggle state (P1) OFF
8/10/2012 11:00:10 AM* Event* Event Trigger "Trial 1 - OFF"
Comment