Announcement

Collapse
No announcement yet.

Alarm panel for X10 and Visonic security sensors

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Alarm panel for X10 and Visonic security sensors

    The RFXCOM plug-in has an integrated alarm panel and supports X10 and Visonic PowerCode sensors.

    Supported receivers and transceivers:
    - The RFXtrx315 (available at www.rfxcom.com) can be used to receive US 310MHz X10 security sensors OR 315MHz Visonic PowerCode sensors.
    - The W800RF can be used to receive US 310MHz X10 security sensors
    - The RFXrec433, RFXtrx433 and RFXtrx433E can be used to receive also European 433.92MHz X10 security sensors and 433.92MHz Visonic PowerCode sensors.
    - The RFXtrx868X (not yet available) can be used to receive European 868.95MHz Visonic PowerCode sensors.
    - Older RFXCOM USB and RFXLAN 310, 433.92 and 868.95MHz receivers

    The Alarm Panel has 4 devices
    Alarm Panel State:
    This device displays the state like Disarmed, Armed-Away, Armed-Home etc.

    Alarm Panel Status:
    This device displays the status like Ready, Ready Home, Alarm, Panic, Arm Pending or Not Ready.

    Alarm Panel Display:
    This panel displays alarm messages and possible sensor errors like battery empty, tamper or communication failure. All stored messages can be displayed with the buttons Up-Down.
    The standard NMA (Notify My Android) function can be used to report warning and alarm messages to your Android phone.

    Alarm Panel Control:
    This device is in fact a virtual key fob with Arm, Arm-Home, Disarm and an optional Panic button.

    Alarm Panel Unlock:
    This device is used to enter an optional unlock code for the Alarm Panel Control - Disarm button.
    Attached Files
    Last edited by b_weijenberg; November 12, 2016, 06:00 AM. Reason: older RFXCOM receivers added

    #2
    I am eagerly awaiting the RFXtrx868X

    Comment

    Working...
    X