Announcement

Collapse
No announcement yet.

Aeotec Smart Dimmer 6 G5 not showing Volts

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Aeotec Smart Dimmer 6 G5 not showing Volts

    Finally starting to use some new gifts from Santa. Received a number of Aeotec Smart Dimmer 6 (Gen 5) Everything is working except the Volts.

    The log has:


    Jan-19 20:43:01 Z-Wave Setting device Watts 1 to value 10.905
    Jan-19 20:43:01 Z-Wave Set_New_Level, Parent: 3 Master Bedroom Aeon Labs Switch Multilevel, Child:3 Master Bedroom Watts 1
    Jan-19 20:43:01 Z-Wave Set_New_Level_Real called for 3 Master Bedroom Watts 1, Type=COMMAND_CLASS_METER_V3, EndPoint=1
    Jan-19 20:43:01 Z-Wave Set_New_Level_Real: Initial device is 3 Master Bedroom Watts 1
    Jan-19 20:43:01 Z-Wave Device: 3 Master Bedroom Watts 1 Set to 10.905 (10.905 Watts)
    Jan-19 20:43:01 Z-Wave Setting device Watts 1 to value 10.905
    Jan-19 20:43:01 Z-Wave Set_New_Level, Parent: 3 Master Bedroom Aeon Labs Switch Multilevel, Child:3 Master Bedroom Watts 1
    Jan-19 20:43:01 Z-Wave Set_New_Level_Real called for 3 Master Bedroom Watts 1, Type=COMMAND_CLASS_METER_V3, EndPoint=1
    Jan-19 20:43:01 Z-Wave Set_New_Level_Real: Initial device is 3 Master Bedroom Watts 1
    Jan-19 20:43:01 Z-Wave ApplicationCommandHandler from node 7 HANDLING: COMMAND_CLASS_MULTI_CHANNEL_V3 Frame(7)=13
    Jan-19 20:43:00 Z-Wave Setting device Amperes 1 to value 0.098
    Jan-19 20:43:00 Z-Wave Set_New_Level, Parent: 3 Master Bedroom Aeon Labs Switch Multilevel, Child:3 Master Bedroom Amperes 1
    Jan-19 20:43:00 Z-Wave Set_New_Level_Real called for 3 Master Bedroom Amperes 1, Type=COMMAND_CLASS_METER_V3, EndPoint=1
    Jan-19 20:43:00 Z-Wave Set_New_Level_Real: Initial device is 3 Master Bedroom Amperes 1
    Jan-19 20:43:00 Z-Wave Device: 3 Master Bedroom Amperes 1 Set to 0.098 (0.098 Amperes)
    Jan-19 20:43:00 Z-Wave Setting device Amperes 1 to value 0.098
    Jan-19 20:43:00 Z-Wave Set_New_Level, Parent: 3 Master Bedroom Aeon Labs Switch Multilevel, Child:3 Master Bedroom Amperes 1
    Jan-19 20:43:00 Z-Wave Set_New_Level_Real called for 3 Master Bedroom Amperes 1, Type=COMMAND_CLASS_METER_V3, EndPoint=1
    Jan-19 20:43:00 Z-Wave Set_New_Level_Real: Initial device is 3 Master Bedroom Amperes 1
    Jan-19 20:43:00 Z-Wave ApplicationCommandHandler from node 7 HANDLING: COMMAND_CLASS_MULTI_CHANNEL_V3 Frame(7)=13

    and the device is:

    Reference ID 1117
    Technology Address F83F974B-007-Q28
    Status 0 = OFF
    Value 0 = "0 "
    String
    Supports Status True
    Dimmable False
    Interface Z-Wave
    Extra Data Store 39 Named entries, 0 UnNamed entries.
    Device Type Internal Energy API, Type: Volts, SubType:
    Device Type (String)
    Z-Wave Volts

    So I'm not sure what the issue is. I have about 50 of their nano/micro smart switch and they all have Volts and they work.

    Michael

    .
    Attached Files
    HS3Pro & HS4Pro on Win2012R2
    Aeotec, Cooper, Cree, GE/Jasco, Intermatic, LIFX, Fortrezz, OSRAM, RCS, Trane, Zooz
    BLBackup, BLGData, BLRussound, BLSpeech, HSTouch, InvisaLink, HSBuddy, IFTTT, JowiHue, NetCAM, PHLocation, Pushover 3P, Random, rnbWeather, UltraLighting3, weatherXML, ZigBee, Z-Wave
    Tags: None
    #2
    Originally posted by Jobee View Post
    Finally starting to use some new gifts from Santa. Received a number of Aeotec Smart Dimmer 6 (Gen 5) Everything is working except the Volts.

    The log has:


    Jan-19 20:43:01 Z-Wave Setting device Watts 1 to value 10.905
    Jan-19 20:43:01 Z-Wave Set_New_Level, Parent: 3 Master Bedroom Aeon Labs Switch Multilevel, Child:3 Master Bedroom Watts 1
    Jan-19 20:43:01 Z-Wave Set_New_Level_Real called for 3 Master Bedroom Watts 1, Type=COMMAND_CLASS_METER_V3, EndPoint=1
    Jan-19 20:43:01 Z-Wave Set_New_Level_Real: Initial device is 3 Master Bedroom Watts 1
    Jan-19 20:43:01 Z-Wave Device: 3 Master Bedroom Watts 1 Set to 10.905 (10.905 Watts)
    Jan-19 20:43:01 Z-Wave Setting device Watts 1 to value 10.905
    Jan-19 20:43:01 Z-Wave Set_New_Level, Parent: 3 Master Bedroom Aeon Labs Switch Multilevel, Child:3 Master Bedroom Watts 1
    Jan-19 20:43:01 Z-Wave Set_New_Level_Real called for 3 Master Bedroom Watts 1, Type=COMMAND_CLASS_METER_V3, EndPoint=1
    Jan-19 20:43:01 Z-Wave Set_New_Level_Real: Initial device is 3 Master Bedroom Watts 1
    Jan-19 20:43:01 Z-Wave ApplicationCommandHandler from node 7 HANDLING: COMMAND_CLASS_MULTI_CHANNEL_V3 Frame(7)=13
    Jan-19 20:43:00 Z-Wave Setting device Amperes 1 to value 0.098
    Jan-19 20:43:00 Z-Wave Set_New_Level, Parent: 3 Master Bedroom Aeon Labs Switch Multilevel, Child:3 Master Bedroom Amperes 1
    Jan-19 20:43:00 Z-Wave Set_New_Level_Real called for 3 Master Bedroom Amperes 1, Type=COMMAND_CLASS_METER_V3, EndPoint=1
    Jan-19 20:43:00 Z-Wave Set_New_Level_Real: Initial device is 3 Master Bedroom Amperes 1
    Jan-19 20:43:00 Z-Wave Device: 3 Master Bedroom Amperes 1 Set to 0.098 (0.098 Amperes)
    Jan-19 20:43:00 Z-Wave Setting device Amperes 1 to value 0.098
    Jan-19 20:43:00 Z-Wave Set_New_Level, Parent: 3 Master Bedroom Aeon Labs Switch Multilevel, Child:3 Master Bedroom Amperes 1
    Jan-19 20:43:00 Z-Wave Set_New_Level_Real called for 3 Master Bedroom Amperes 1, Type=COMMAND_CLASS_METER_V3, EndPoint=1
    Jan-19 20:43:00 Z-Wave Set_New_Level_Real: Initial device is 3 Master Bedroom Amperes 1
    Jan-19 20:43:00 Z-Wave ApplicationCommandHandler from node 7 HANDLING: COMMAND_CLASS_MULTI_CHANNEL_V3 Frame(7)=13

    and the device is:

    Reference ID 1117
    Technology Address F83F974B-007-Q28
    Status 0 = OFF
    Value 0 = "0 "
    String
    Supports Status True
    Dimmable False
    Interface Z-Wave
    Extra Data Store 39 Named entries, 0 UnNamed entries.
    Device Type Internal Energy API, Type: Volts, SubType:
    Device Type (String)
    Z-Wave Volts

    So I'm not sure what the issue is. I have about 50 of their nano/micro smart switch and they all have Volts and they work.

    Michael

    .
    Rich said he changed the inclusion process on those such that voltage reporting is not set by default, to reduce unnecessary traffic. He felt that volt reporting on every device is superfluous. You should be able to go into Z-Wave settings on the root and select the items you want reported on each of the three group schedules.
    HS4 Pro, 4.2.19.0 Windows 10 pro, Supermicro LP Xeon

    Comment

      #3
      I do have some Aeotec devices but not these. Aren't they line powered? If so, the volts will be relatively constant. The amps and watts are what compute energy usage as long as voltage is constant. On a line connected device, I just don't see why volts is an important variable. It should be a constant. For me, I prefer watts.

      Now, should this device be a battery powered device, I'll claim a Roseanne Roseannadanna. Never mind...

      Comment

        #4
        Does your dimmer status in Homeseer update when switched locally? I’ve set the root device to enable notifications but nothing shows up in the log when the unit is switched manually. I can get it to poll the unit and update but I’d rather have instant notification.

        Comment

          #5
          Most times it updated without issue. I have only had a couple times where it did not. I have since added the WallMote and removed all switches and have had no issues. I love them as I can switch and scene with one unit instead of 4 switches.
          HS3Pro & HS4Pro on Win2012R2
          Aeotec, Cooper, Cree, GE/Jasco, Intermatic, LIFX, Fortrezz, OSRAM, RCS, Trane, Zooz
          BLBackup, BLGData, BLRussound, BLSpeech, HSTouch, InvisaLink, HSBuddy, IFTTT, JowiHue, NetCAM, PHLocation, Pushover 3P, Random, rnbWeather, UltraLighting3, weatherXML, ZigBee, Z-Wave

          Comment

          Previous template Next
          Working...
          X