www.homeseer.com    
 

Go Back   HomeSeer Message Board > 3rd Party Plug-Ins/Scripts > Plug-ins by Author > Click Here for List of Author Forums > DonMor Plug-Ins > Lutron Radio RA2 Plug-In (3P)

Lutron Radio RA2 Plug-In (3P) Discussion area for DonMor's Lutron Radio RA2 plug-in

Reply
 
Thread Tools Display Modes
  #1  
Old May 17th, 2018, 04:18 PM
charlie468 charlie468 is offline
Viewer
 
Join Date: May 2018
Location: USA
Posts: 4
RadioRa2 VCRX Doesn't Communicate

Hello,

I'm relatively new to HS3, and brand new to this forum (so please be patient)
I checked other posts and have found that a smooth communication process between HS3, and RadioRa2 VCRX is possible. It's just not working for me. Hopefully someone can tell me what I'm doing wrong. I used "RadioRa2 Essentials" to configure the VCRX. I created the device, Programmed each of the 4 outputs to individual inputs, Activated the VCRX, and Transferred it to the Main Repeater.
Then in HS3 under the RadioRa2 Config menu clicked "System Create" button and received "Create 7" feed back.
The HS3 "Device Management" GUI displays 9 devices I can attribute to the VCRX (as follows) Relay 1, Relay 2, "Full/Security", Input 1, Input 2, Relay 3, Relay 4, "security Flash", "Visor Control". The 4 relays have an associated trigger which when activated updates the time stamp, but only output 1 cycles at the VCRX (for 30 sec (not the programmed cycle time)). Additionally if the relays or inputs are manually activated on the VCRX there is no activity reflected in HS3.

I have several (15+) other RR2 devices in system which all function as designed.

What am I missing?
Reply With Quote
  #2  
Old May 19th, 2018, 09:25 AM
DonMor DonMor is offline
Seer Deluxe
 
Join Date: Jan 2003
Location: Sherbrooke, Qc, Canada
Posts: 370
Can you uncheck the Donald not log on an output and also check the debug log in the config of the plugin, after use the Lutron apps to activate the relay. Than post the log, it should be something like this

May-19 9:21:29 AM LutronRA2 Debug Receive: ~DEVICE,42,83,9,1
May-19 9:21:29 AM LutronRA2 Debug Receive: ~OUTPUT,40,30,1,0.00
May-19 9:21:29 AM LutronRA2 Debug Receive: ~OUTPUT,40,29,6
May-19 9:21:29 AM LutronRA2 Device: Equipment Room LUTRONRA2 O Arm Alarm set to (Open 0)
May-19 9:21:29 AM LutronRA2 Debug Receive: ~OUTPUT,40,1,0.00
May-19 9:21:29 AM LutronRA2 Debug Command Send MAINTAINEDContact: #OUTPUT,40,1,0,,00:00:00
May-19 9:21:29 AM LutronRA2 Debug Send: #OUTPUT,40,1,0,,00:00:00
May-19 9:21:29 AM LutronRA2 Device: Equipment Room LUTRONRA2 O Arm Alarm set to (Open 0)
May-19 9:21:29 AM Device Control Device: LUTRONRA2 Equipment Room O Arm Alarm to Open (0) by/from: CAPI Control Handler
May-19 9:20:58 AM LutronRA2 Debug Receive: ~DEVICE,42,83,9,0
May-19 9:20:58 AM LutronRA2 Debug Receive: ~OUTPUT,40,30,1,100.00
May-19 9:20:58 AM LutronRA2 Debug Receive: ~OUTPUT,40,29,6
May-19 9:20:58 AM LutronRA2 Device: Equipment Room LUTRONRA2 O Arm Alarm set to (Close 100)
May-19 9:20:58 AM LutronRA2 Debug Receive: ~OUTPUT,40,1,100.00
Reply With Quote
  #3  
Old May 19th, 2018, 11:19 AM
charlie468 charlie468 is offline
Viewer
 
Join Date: May 2018
Location: USA
Posts: 4
Ok- I Unchecked "Do not log commands from this device" for
every device I associate with the VCRX under the "Device Management" tab.
Then in the RR2 Plug-in Config menu I checked "Debug logging", and "Debug
logging Developer Mode Window". I restarted HS3 and first cycled the four
outputs (triggers) in HS3, and second manually activated the four outputs, and inputs on the VCRX.

I really appreciate your help and I hope I gave you what you are looking for (kind of a long response)

Message/Source
May-19 10:07:40 AM LutronRA2 ERROR SerializedResponseVISOR_CONTROL_RECEIVER: error ID: 49Object reference not set to an instance of an object.
May-19 10:07:40 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 0)
May-19 10:07:40 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 4)
May-19 10:07:40 AM LutronRA2 Debug Receive: ~DEVICE,49,4,3
May-19 10:07:35 AM LutronRA2 ERROR SerializedResponseVISOR_CONTROL_RECEIVER: error ID: 49Object reference not set to an instance of an object.
May-19 10:07:35 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 0)
May-19 10:07:35 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 3)
May-19 10:07:35 AM LutronRA2 Debug Receive: ~DEVICE,49,3,3
May-19 10:07:30 AM LutronRA2 ERROR SerializedResponseVISOR_CONTROL_RECEIVER: error ID: 49Object reference not set to an instance of an object.
May-19 10:07:30 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 0)
May-19 10:07:30 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 2)
May-19 10:07:30 AM LutronRA2 Debug Receive: ~DEVICE,49,2,3
May-19 10:07:25 AM LutronRA2 ERROR SerializedResponseVISOR_CONTROL_RECEIVER: error ID: 49Object reference not set to an instance of an object.
May-19 10:07:25 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 0)
May-19 10:07:25 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 1)
May-19 10:07:25 AM LutronRA2 Debug Receive: ~DEVICE,49,1,3
May-19 10:07:24 AM LutronRA2 ERROR SerializedResponseVISOR_CONTROL_RECEIVER: error ID: 49Object reference not set to an instance of an object.
May-19 10:07:24 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 0)
May-19 10:07:24 AM LutronRA2 Device: Garage LUTRONRA2 Visor Control set to ( 1)
May-19 10:07:24 AM LutronRA2 Debug Receive: ~DEVICE,49,1,3
May-19 10:06:12 AM LutronRA2 Debug Receive: ~OUTPUT,48,30,1,0.00
May-19 10:06:12 AM LutronRA2 Debug Receive: ~OUTPUT,48,29,6
May-19 10:06:12 AM LutronRA2 Device: Garage LUTRONRA2 North OH Door set to (Open 0)
May-19 10:06:12 AM LutronRA2 Debug Receive: ~OUTPUT,48,1,0.00
May-19 10:06:12 AM LutronRA2 Debug Command Send PULSEDContact: #OUTPUT,48,1,0
May-19 10:06:12 AM LutronRA2 Device: Garage LUTRONRA2 North OH Door set to (Open 0)
May-19 10:06:12 AM LutronRA2 Debug Send: #OUTPUT,48,1,0
May-19 10:06:11 AM LutronRA2 Debug Receive: ~OUTPUT,48,30,1,1.00
May-19 10:06:11 AM LutronRA2 Debug Receive: ~OUTPUT,48,29,6
May-19 10:06:11 AM LutronRA2 Device: Garage LUTRONRA2 North OH Door set to (Trigger 1)
May-19 10:06:11 AM LutronRA2 Debug Receive: ~OUTPUT,48,1,1.00
May-19 10:06:11 AM LutronRA2 Device: Garage LUTRONRA2 North OH Door set to (Trigger 1)
May-19 10:06:11 AM LutronRA2 Debug Command Send PULSEDContact: #OUTPUT,48,1,1
May-19 10:06:11 AM LutronRA2 Debug Send: #OUTPUT,48,1,1
May-19 10:06:11 AM LutronRA2 Device: Garage LUTRONRA2 North OH Door set to (Trigger 1)
May-19 10:06:11 AM Device Control Device: LUTRONRA2 Garage North OH Door to Trigger (1) by/from: CAPI Control Handler
May-19 10:05:34 AM LutronRA2 Debug Receive: ~OUTPUT,47,30,1,0.00
May-19 10:05:34 AM LutronRA2 Debug Receive: ~OUTPUT,47,29,6
May-19 10:05:34 AM LutronRA2 Device: Garage LUTRONRA2 North Ctr OH Door set to (Open 0)
May-19 10:05:34 AM LutronRA2 Debug Receive: ~OUTPUT,47,1,0.00
May-19 10:05:34 AM LutronRA2 Debug Command Send PULSEDContact: #OUTPUT,47,1,0
May-19 10:05:34 AM LutronRA2 Device: Garage LUTRONRA2 North Ctr OH Door set to (Open 0)
May-19 10:05:34 AM LutronRA2 Debug Send: #OUTPUT,47,1,0
May-19 10:05:33 AM LutronRA2 Debug Receive: ~OUTPUT,47,30,1,1.00
May-19 10:05:33 AM LutronRA2 Debug Receive: ~OUTPUT,47,29,6
May-19 10:05:33 AM LutronRA2 Device: Garage LUTRONRA2 North Ctr OH Door set to (Trigger 1)
May-19 10:05:33 AM LutronRA2 Debug Receive: ~OUTPUT,47,1,1.00
May-19 10:05:33 AM LutronRA2 Device: Garage LUTRONRA2 North Ctr OH Door set to (Trigger 1)
May-19 10:05:33 AM LutronRA2 Debug Command Send PULSEDContact: #OUTPUT,47,1,1
May-19 10:05:33 AM LutronRA2 Debug Send: #OUTPUT,47,1,1
May-19 10:05:33 AM LutronRA2 Device: Garage LUTRONRA2 North Ctr OH Door set to (Trigger 1)
May-19 10:05:33 AM Device Control Device: LUTRONRA2 Garage North Ctr OH Door to Trigger (1) by/from: CAPI Control Handler
May-19 10:04:58 AM LutronRA2 Debug Receive: ~OUTPUT,45,30,1,0.00
May-19 10:04:58 AM LutronRA2 Debug Receive: ~OUTPUT,45,29,6
May-19 10:04:58 AM LutronRA2 Device: Garage LUTRONRA2 East OH Door set to (Open 0)
May-19 10:04:58 AM LutronRA2 Debug Receive: ~OUTPUT,45,1,0.00
May-19 10:04:58 AM LutronRA2 Debug Command Send PULSEDContact: #OUTPUT,45,1,0
May-19 10:04:58 AM LutronRA2 Device: Garage LUTRONRA2 East OH Door set to (Open 0)
May-19 10:04:58 AM LutronRA2 Debug Send: #OUTPUT,45,1,0
May-19 10:04:57 AM LutronRA2 Debug Receive: ~OUTPUT,45,30,1,1.00
May-19 10:04:57 AM LutronRA2 Debug Receive: ~OUTPUT,45,29,6
May-19 10:04:57 AM LutronRA2 Device: Garage LUTRONRA2 East OH Door set to (Trigger 1)
May-19 10:04:57 AM LutronRA2 Debug Receive: ~OUTPUT,45,1,1.00
May-19 10:04:57 AM LutronRA2 Device: Garage LUTRONRA2 East OH Door set to (Trigger 1)
May-19 10:04:57 AM LutronRA2 Debug Command Send PULSEDContact: #OUTPUT,45,1,1
May-19 10:04:57 AM LutronRA2 Debug Send: #OUTPUT,45,1,1
May-19 10:04:57 AM LutronRA2 Device: Garage LUTRONRA2 East OH Door set to (Trigger 1)
May-19 10:04:57 AM Device Control Device: LUTRONRA2 Garage East OH Door to Trigger (1) by/from: CAPI Control Handler
May-19 10:04:20 AM LutronRA2 Debug Receive: ~OUTPUT,46,30,1,0.00
May-19 10:04:20 AM LutronRA2 Debug Receive: ~OUTPUT,46,29,6
May-19 10:04:20 AM LutronRA2 Device: Garage LUTRONRA2 East Ctr OH Door set to (Open 0)
May-19 10:04:20 AM LutronRA2 Debug Receive: ~OUTPUT,46,1,0.00
May-19 10:04:20 AM LutronRA2 Debug Command Send PULSEDContact: #OUTPUT,46,1,0
May-19 10:04:20 AM LutronRA2 Device: Garage LUTRONRA2 East Ctr OH Door set to (Open 0)
May-19 10:04:20 AM LutronRA2 Debug Send: #OUTPUT,46,1,0
May-19 10:04:19 AM LutronRA2 Debug Receive: ~OUTPUT,46,30,1,1.00
May-19 10:04:19 AM LutronRA2 Debug Receive: ~OUTPUT,46,29,6
May-19 10:04:19 AM LutronRA2 Device: Garage LUTRONRA2 East Ctr OH Door set to (Trigger 1)
May-19 10:04:19 AM LutronRA2 Debug Receive: ~OUTPUT,46,1,1.00
May-19 10:04:19 AM LutronRA2 Device: Garage LUTRONRA2 East Ctr OH Door set to (Trigger 1)
May-19 10:04:19 AM LutronRA2 Debug Command Send PULSEDContact: #OUTPUT,46,1,1
May-19 10:04:19 AM LutronRA2 Debug Send: #OUTPUT,46,1,1
May-19 10:04:19 AM LutronRA2 Device: Garage LUTRONRA2 East Ctr OH Door set to (Trigger 1)
May-19 10:04:19 AM Device Control Device: LUTRONRA2 Garage East Ctr OH Door to Trigger (1) by/from: CAPI Control Handler
May-19 10:03:14 AM TTS Speak ():Web server port number is 81
May-19 10:03:14 AM TTS Speak ():Welcome to Home-Seer
May-19 10:03:10 AM Z-Wave Starting Z-Wave Polling for Network 0184DFF0...
May-19 10:02:51 AM Web Server Web Server authorized local login successful from: 192.168.0.140 User: Administrator
May-19 10:02:46 AM Z-Wave ************************************************************ *******************
May-19 10:02:46 AM Z-Wave STARTUP COMPLETE: All configured interfaces were successfully initialized.
May-19 10:02:46 AM Z-Wave ************************************************************ *******************
May-19 10:02:45 AM Z-Wave Butlers Pantry: ............................................................ ..........
May-19 10:02:45 AM Z-Wave Butlers Pantry: .............................. FINISHED ..............................
May-19 10:02:45 AM Z-Wave Butlers Pantry: ............................................................ ..........
May-19 10:02:45 AM Z-Wave Butlers Pantry is the SIS for the network.
May-19 10:02:45 AM Z-Wave Butlers Pantry There is a SUC/SIS in the network.
May-19 10:02:45 AM Z-Wave Butlers Pantry Controller is static lib.
May-19 10:02:45 AM Z-Wave Butlers Pantry Controller chip type is ZW050x.
May-19 10:02:45 AM Z-Wave The interface's security support has been set.
May-19 10:02:45 AM Z-Wave Butlers Pantry: Found 39 Z-Wave nodes in interface node ID 1 (Butlers Pantry)
May-19 10:02:45 AM Z-Wave Butlers Pantry: Z-Wave interface node ID: 1, Home ID: 0184DFF0
May-19 10:02:45 AM Z-Wave Butlers Pantry: Z-Wave Serial API version: 5
May-19 10:02:45 AM Z-Wave Butlers Pantry: Z-Wave services for the SECURITY COMMAND CLASS were successfully started.
May-19 10:02:43 AM Startup (Startup.vb script) No speaker clients detected, waiting up to 30 seconds for any to connect...
May-19 10:02:43 AM Startup (Startup.vb script) Scripting is OK and is now running Startup.vb
May-19 10:02:43 AM Info ASCII listener started on port 11000
Reply With Quote
  #4  
Old May 19th, 2018, 01:01 PM
DonMor DonMor is offline
Seer Deluxe
 
Join Date: Jan 2003
Location: Sherbrooke, Qc, Canada
Posts: 370
The id 49 was not import, be sure to have a name different than the default in the config of Lutron, try to re-import to see if the Id 49 import.

The input should be in the same adresse with device and the output should have a unique adresse for each.
Attached Images
  
Reply With Quote
  #5  
Old May 19th, 2018, 06:48 PM
charlie468 charlie468 is offline
Viewer
 
Join Date: May 2018
Location: USA
Posts: 4
This is the part that "I'm relatively new to HS3" comes into play. I understand the overview of what your telling me, but the finite details of how to achieve it escape me. In an attempt to follow your instructions in config I checked "Reset Name to RA2 default and then clicked on "System Create" Then in a separate step I entered 49 in the "devices to reset" box and clicked "System Create" As you probably know nothing changed in the system function.

I've tried to attach a screen shot of my HS3 desktop related to the Visor so you can see it looks incomplete. (nothing like the pic you provided me)
Attached Images
 
Reply With Quote
  #6  
Old May 19th, 2018, 09:43 PM
DonMor DonMor is offline
Seer Deluxe
 
Join Date: Jan 2003
Location: Sherbrooke, Qc, Canada
Posts: 370
Go in tool, setup, custom, and check the option Show Device Address/Code Column on Device Management Page, than post me the same screen
Reply With Quote
  #7  
Old May 20th, 2018, 07:22 AM
charlie468 charlie468 is offline
Viewer
 
Join Date: May 2018
Location: USA
Posts: 4
Thank You
Attached Images
 
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Plugin doesn't communicate with API The-Source BLGData (3P) 33 January 31st, 2018 07:05 AM
Monitor VCRX CCI Status VitaminTee Lutron Radio RA2 Plug-In (3P) 6 January 29th, 2018 06:55 PM
RA2 vcrx visor control for garage doors fran4383 Lutron Radio RA2 Plug-In (3P) 1 November 18th, 2017 11:22 PM
Possible to use HS3 and RadioRA2 just for the keypads? 416to305 Lutron Radio RA2 Plug-In (3P) 4 August 21st, 2017 12:06 PM
HomeSeer and RadioRA2 dkyork Lighting & Primary Technology Discussion 1 November 18th, 2010 01:20 PM


All times are GMT -4. The time now is 12:00 AM.


Copyright HomeSeer Technologies, LLC