So a couple of weeks ago, I tried to add my Neeo to my z-wave network which in turn created node 24. It was unsuccessful so I removed it. However, after a rescan of my Power Z-Wave Aeon Labs Multilevel Sensor, followed by optimize then full optimize, it seems to think node 24 is an available route. It doesn't show as a neighbour however....
What is the best way to resolve this? I did a full backup of my z-net before. Should I just restore?
Jan-08 1:38:31 PM Z-Wave MyZ-Net: Device Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root Optimization and Add Route completed successfully.
Jan-08 1:38:31 PM Z-Wave Assigning return route from node 24 to Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root
Jan-08 1:38:30 PM Z-Wave Assigning return route from node 1 to Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root
Jan-08 1:38:04 PM Z-Wave 6 out of 6 Child devices of node 14 were created successfully.
Auditing this node shows:
Auditing node 14 (Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root) ...
HomeSeer was able to send a frame to the node.
HomeSeer was able to query the node and receive information back from it.
The node's neighbor rating is: Excellent with 9 neighbors.
Neighboring nodes to Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root:
HVAC Z-Wave Hallway Thermostat (Node 6)
Lighting Family Room Bookcase Lights (Node 7)
Lighting Front Hallway Stairway Multi Root (Node 13)
Lighting Family Room Family Room Multi Root (Node 16)
Lighting Kitchen Counter Switch 1 (Node 18)
Lighting Kitchen Counter Switch 2 (Node 19)
HVAC Sarah's Room Sarah Booster Fan (Node 20)
Fire Place Family Room Fire Place Root (Node 21)
2nd Floor Master Bedroom Heating Blanket (Node 23)
This node supports associations on the following groups:
Group 1:
Node 1 Z-Wave MyZ-Net (Node 1)
INVALID/MISSING NODE 24
Finished!
Robert
EDIT: ah... I didn't power cycle the Z-net. Will try when I get home.
What is the best way to resolve this? I did a full backup of my z-net before. Should I just restore?
Jan-08 1:38:31 PM Z-Wave MyZ-Net: Device Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root Optimization and Add Route completed successfully.
Jan-08 1:38:31 PM Z-Wave Assigning return route from node 24 to Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root
Jan-08 1:38:30 PM Z-Wave Assigning return route from node 1 to Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root
Jan-08 1:38:04 PM Z-Wave 6 out of 6 Child devices of node 14 were created successfully.
Auditing this node shows:
Auditing node 14 (Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root) ...
HomeSeer was able to send a frame to the node.
HomeSeer was able to query the node and receive information back from it.
The node's neighbor rating is: Excellent with 9 neighbors.
Neighboring nodes to Power Z-Wave Aeon Labs Multilevel Sensor Node 14 Root:
HVAC Z-Wave Hallway Thermostat (Node 6)
Lighting Family Room Bookcase Lights (Node 7)
Lighting Front Hallway Stairway Multi Root (Node 13)
Lighting Family Room Family Room Multi Root (Node 16)
Lighting Kitchen Counter Switch 1 (Node 18)
Lighting Kitchen Counter Switch 2 (Node 19)
HVAC Sarah's Room Sarah Booster Fan (Node 20)
Fire Place Family Room Fire Place Root (Node 21)
2nd Floor Master Bedroom Heating Blanket (Node 23)
This node supports associations on the following groups:
Group 1:
Node 1 Z-Wave MyZ-Net (Node 1)
INVALID/MISSING NODE 24
Finished!
Robert
EDIT: ah... I didn't power cycle the Z-net. Will try when I get home.
Comment