Announcement

Collapse
No announcement yet.

Registering an Ambient Weather F007TH

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Registering an Ambient Weather F007TH

    How do I register this sensor?

    I have the Oregon protocol enabled and working

    the F007TH doesn't have a reset btn. I set the channel and inserted the batteries but the plugin isn't picking up sensor

    I tried Ch 1,2, 4.

    what am I missing
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    #2
    I updated the RFX firmware to 1015 and RFX recv now sees the device

    1. The plugin registers this as a "TFA30.3133 Temperature Sensor". is this correct?

    2. the plugin didn't pickup the Humidity reading (only temp and battery status). The user guide says it supports the F007TH but doesn't mention this limitation. is this a bug?
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment


      #3
      FW release 433_1016 28-02-2017
      TH9 - F007TH temperature+humidity sensor added (Ext2)

      Use the latest Ext2 firmware version 1022, available in the RFXCOM Downloads page

      Comment


        #4
        will this fw work on an rfxrec433?

        I can get it loaded but the plugin is complaining at startup. see log below

        Nov-22 6:10:07 PM RFXCOM Error: 36 (decode_InterfaceMessage) wrong transceiver type selected!
        Nov-22 6:10:07 PM RFXCOM Error: 36 (decode_InterfaceMessage) transceiver 1 off-line!
        Nov-22 6:10:06 PM Plug-In Finished initializing plug-in RFXCOM
        Nov-22 6:10:06 PM RFXCOM 36 (InitTRX) Connect Transceiver #1 on COM8
        Nov-22 6:10:05 PM RFXCOM 36 (InitIO) RFXCOM version is:30.0.0.34
        Nov-22 6:10:05 PM Info Plugin RFXCOM has connected. IP:127.0.0.1:36890
        Mark

        HS3 Pro 4.2.19.5
        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

        Comment


          #5
          I changed the transceiver type to a RFXtrx433 and it seems to be working

          #1. is this the correct procedure for using an Ext2 firmware?

          #2. the plugin recognizes the F007TH as "FineOffset,Viking 02038,TSS320,Proove311501 Temperature Sensor". Is this correct?
          Last edited by mnsandler; November 22, 2017, 06:30 PM. Reason: added #2
          Mark

          HS3 Pro 4.2.19.5
          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

          Comment


            #6
            The RFXrec433 can only be used with RFXrec, Type1 or Type2 firmware.
            The RFXrec433E (see the label on the bottom) can be used with all firmware types.
            If you do not use RFXrec firmware in the RFXrec433E you must define the device as RFXtrx433 in the plug-in.

            Correct, the plugin recognizes the F007TH as "FineOffset,Viking 02038,TSS320,Proove311501 Temperature Sensor"

            Comment


              #7
              Thanks. I have an RFXrec433E so that makes sense why i was able to load the Type2 fw.

              i know the user guide discusses the firmware vs devices a little, but i think it would be helpful on the firmware download page to have a matrix of firmware vs devices which outlines which firmware work on which devices, and vice versa.
              Mark

              HS3 Pro 4.2.19.5
              Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
              Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
              Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

              Comment


                #8
                Each firmware zip contains the "Important_ReadMe.txt" file

                Comment

                Working...
                X