Announcement

Collapse
No announcement yet.

Smoke Bridge Links

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Smoke Bridge Links

    So, I replaced my controller today with a new PLM, I used the process in the plugin for this.

    I have noticed that some modules (including my Smoke Bridge) don't have a link that would cause them to send information to the PLM when status changes. I'm running plugin 3.0.5.0.

    #2
    use the "program device for homeseer" button on the smoke bridge page and see if that recreates the link.
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment


      #3
      Only the homeseer -> bridge but not the other way around.

      Comment


        #4
        Originally posted by dandrzejewski View Post
        Only the homeseer -> bridge but not the other way around.
        i just reprogrammed mine. it only creates the following:

        Link #1 Sensor is controlled by HomeSeer using PLM Group #0 (i2CS Registration Link) - Command: Off
        Link #2 Sensor is controlled by HomeSeer using PLM Group #254 (HomeSeer All Devices Group) - Command: On

        I think i need to get rid of #2; its not necessary
        Mark

        HS3 Pro 4.2.19.5
        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

        Comment


          #5
          Shouldn't there be a link where the bridge is a controller and homeseer is the responder?

          Comment


            #6
            Originally posted by dandrzejewski View Post
            Shouldn't there be a link where the bridge is a controller and homeseer is the responder?
            The bridge only transmits broadcast msgs not direct msgs to the plm. so no controller link is required
            Mark

            HS3 Pro 4.2.19.5
            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
            Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

            Comment

            Working...
            X