Hi I a newbie and have a set of non branded remote controlled roller blinds with their remote and am trying to control via homeseer HS3.
I cant seem to find which device to setup as. I have tried using all blind types by setting my blinds into learn mode and clicking up or on but don't get any result.
I have a RFCOM 433e transmitter HW ver 1.3 Firmware 1013 ext
( I have used this successfully to control somfy blinds)
I have HS3 Pro 3.0.0.297
I have the remote for the blinds and have used RFXCOM Mngr to capture the transmit info of Up button of remote (see below)
From RFXCOM user guide I think this undecoded ARC protocol which it says to use Lighting 4 as the device type. I have used the instructions to translate the capture data into lighting 4 code and used rfxcom manger to transmit without success, I believe this is down to my error in application of instructions as my code doesn't match the format in the user guide, user guide has 8 characters in code where as my capture has 14. In 8 digit format first 2 characters are ignored and reaming 6 are used to calculate code. So with my capture I don't know what 6 to use
If any has advice on above or how to go about a different way I would great appreciate it
CAPTURED TRANSMIT OF "UP" Button
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:43FFFFFFFFAEA50004B6
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:2CD60204B004B7
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:43FFFFFFFFAEA50004AD
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:2CD60204B004C0
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:43FFFFFFFFAEA50004AD
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:2CD605F93004B7
Cheers
Fergus
I cant seem to find which device to setup as. I have tried using all blind types by setting my blinds into learn mode and clicking up or on but don't get any result.
I have a RFCOM 433e transmitter HW ver 1.3 Firmware 1013 ext
( I have used this successfully to control somfy blinds)
I have HS3 Pro 3.0.0.297
I have the remote for the blinds and have used RFXCOM Mngr to capture the transmit info of Up button of remote (see below)
From RFXCOM user guide I think this undecoded ARC protocol which it says to use Lighting 4 as the device type. I have used the instructions to translate the capture data into lighting 4 code and used rfxcom manger to transmit without success, I believe this is down to my error in application of instructions as my code doesn't match the format in the user guide, user guide has 8 characters in code where as my capture has 14. In 8 digit format first 2 characters are ignored and reaming 6 are used to calculate code. So with my capture I don't know what 6 to use
If any has advice on above or how to go about a different way I would great appreciate it
CAPTURED TRANSMIT OF "UP" Button
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:43FFFFFFFFAEA50004B6
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:2CD60204B004B7
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:43FFFFFFFFAEA50004AD
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:2CD60204B004C0
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:43FFFFFFFFAEA50004AD
------------------------------------------------
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:2CD605F93004B7
Cheers
Fergus