Is anyone else having an issue getting the plugin to work

[gearyt]

Do u have any control and what command end are u useing

yes partial... CR/LF
going down the devices, Blade has been able to fix each as I test

currently on/standby, mute/unmute, volume work flawlessly
we are currently working on input and zone 2 volume

[sweet]

@gearyt what model are you testing with and @blade what format did the plugin use before change? is it possible to post previous version? still have no control and lost status wen I use remote in your latest release

[gearyt]

Testing w/ NR-626
.25 blew it up
.24 was getting close

[dmauer]

Testing w/ NR-626
.25 blew it up
.24 was getting close

.25 on my NR-717 really had issues -- no control

[Blade]

Try 2.0.26

[gearyt]

need to get home ( 4:00 PST ) and look at receiver

[gearyt]

ok.. back to where we were, but gained some

1) Stand-by /On works, toggle does not

2) MUte/UnMute works, toggle only works one direction (unmute to mute )

3) Video works, but references wrong input, video 1 does not
( we have discussed.. this is a feature problem with Onkyo

3) Zone 2 Power works On/Standby problem with Toggle, one direction Standby to On

4_) Any hit to Zone 2 Volume + or _ causes to go to minimum

noticed that main volume flashed "MIN" then goes correct..both up and down

Hope this helps
Geary

[gearyt]

on inputs (NR 626)
Selected by pull down gives...
Video 1 = no change
Video 2 = CBL/SAT
Video 3 = GAME
Video 4 = AUX
Video 5 = No Change
Video 6 = PC
video 7 = PC
DVD = BD/DVD
Tape 1 = no change
Tape 2 = no change
Phono = Phono
CD = TV
FM = FM
AM = AM
Tuner = FM
Music Server = NET
Internet Radio = Internet Radio
USB Front = USB
USB Rear = USB
MultiChannel = no change ? This is a audio option, not input
XM - not enabled to test
Sirius - not enabled to test
Universal port = not able to test, don't own

I know the NR-737 will be different

[sweet]

Gearyt have to gotten your 737 to connect or have u only tested 626? Still no luck

[gearyt]

will try 737 in am..... other side of house

[NicolaiL]

Volume controls are broken in 26 for me. I see 27 is in the updater so will give this one a try in a little while.

[Blade]

I would think that volume should work a lot better for everyone.
There must be something about some of the receivers.

[gearyt]

good morning.. starting to set up to test the 737

[NicolaiL]

Volume controls are broken in 26 for me. I see 27 is in the updater so will give this one a try in a little while.

I should probably qualify this a bit. Basically most (but not all) volume up/down and slider set volumes will now set an actual volume of "Min" (0) on the amplifier. Occasionally when I press the volume increase button will the volume go up, but most times it just goes straight to 0 (or Min as it says on the Amp itself).

The HS3 GUI seems to think all is OK and still shows the volume level as the number it should be at, so this is out of sync with the actual setting on the amp.

Blade, this all used to work perfectly before the beta you sent me so not sure what has changed since then?

[Blade]

You are seeing this with the latest in the updater?