Announcement

Collapse
No announcement yet.

New Insteon Motion Sensor II...beta support available in the Updater

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Read Settings after On cms - missing?

    On the MS-II config page, I do not see this line:
    Read settings after On cmds (0=Disable)____

    Should there be one for this new device?


    I made some settings changes and am having difficulty getting past this advisory notice:
    There are Setting and Op Flag changes pending.


    Log

    Apr-09 6:48:43 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:41:07 AM Insteon Setting status and value for device 41.61.63:1. Old status:100 Old Value:100, New Status:3 New Value:0
    Apr-09 6:41:07 AM Insteon ProcessGroupBroadcast: Device Hall MS (41.61.63) is group broadcast source (tgt group/button:1) sending cmd 13
    Apr-09 6:41:07 AM Insteon Received Hall MS Occupancy Sensor: (41.61.63) Go OFF
    Apr-09 6:40:44 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:39:48 AM Insteon Received a Direct ACK from Hall MS (41.61.63): 41 61 63 45 50 C8 2F 20 03
    Apr-09 6:39:48 AM Insteon Motion Sensor 41.61.63 Op Flags programmed successfully.
    Apr-09 6:39:46 AM Insteon Setting status and value for device 41.61.63:1. Old status:100 Old Value:100, New Status:2 New Value:100
    Apr-09 6:39:46 AM Insteon ProcessGroupBroadcast: Device Hall MS (41.61.63) is group broadcast source (tgt group/button:1) sending cmd 11
    Apr-09 6:39:46 AM Insteon Received Hall MS Occupancy Sensor: (41.61.63) Go ON
    Apr-09 6:39:45 AM Insteon Setting status and value for device 41.61.63:1. Old status:0 Old Value:0, New Status:2 New Value:100
    Apr-09 6:39:45 AM Insteon ProcessGroupBroadcast: Device Hall MS (41.61.63) is group broadcast source (tgt group/button:1) sending cmd 11
    Apr-09 6:39:45 AM Insteon Received Hall MS Occupancy Sensor: (41.61.63) Go ON
    Apr-09 6:39:27 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:39:00 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:37:17 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:29:56 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:25:17 AM Insteon Setting status and value for device 41.61.63:1. Old status:100 Old Value:100, New Status:3 New Value:0
    Apr-09 6:25:17 AM Insteon ProcessGroupBroadcast: Device Hall MS (41.61.63) is group broadcast source (tgt group/button:1) sending cmd 13
    Apr-09 6:25:17 AM Insteon Received Hall MS Occupancy Sensor: (41.61.63) Go OFF
    Apr-09 6:21:22 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:21:06 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:20:46 AM Insteon Edit Insteon Device #18 Addr: 41.61.63, Name:MS, Location:Hall
    Apr-09 6:20:36 AM Insteon Received a Broadcast message from Hall MS (41.61.63): 01 41 61 63 10 16 46 8F 02 00

    EDIT: I must have hit a default On cmd count, Settings updated and advisory notice went away.

    thanks,
    randy
    Last edited by randy_h; April 9, 2017, 09:11 AM.

    Comment


      #17
      Randy,

      On the MS-II config page, I do not see this line:
      Read settings after On cmds (0=Disable)____
      this is no longer necessary as the settings/readings are read during the heartbeat.
      Mark

      HS3 Pro 4.2.19.5
      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
      Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

      Comment


        #18
        I consider this a low priority cosmetic issue"

        Channel numbers for new features in Edit Device page are not reported exactly as they are on Device Management view.
        Attached Files
        Last edited by randy_h; April 9, 2017, 01:22 PM.

        Comment


          #19
          I added one MS-II normally and had no issues at all.

          I tried another with the device replacement option and while it did successfully replace the old motion, it did not add the new devices. Also there are some errors in the log:

          Apr-09 11:16:11 AM Insteon ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
          Apr-09 11:16:11 AM Insteon ** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files (x86)\HomeSeer HS3\Config\Insteon Error Report.Log
          Apr-09 11:16:11 AM Insteon ***:Error in ProcessRawReceive: Object reference not set to an instance of an object. -- Details System.NullReferenceException: Object reference not set to an instance of an object. at HSPI_Insteon.hspiAPI.HSAPI.GetDeviceAddress(Int32 ref) at Insteon.Support.Core.InsteonModule.SetHSDeviceValue(Int32 ref, Int32 Val, Boolean TriggerEvents) at Insteon.Support.Devices.MotionSensorIIClass.ProcessGroupBroa dcast(TransmitMsgType Msg, Boolean RemoteMsg) at Insteon.Support.Core.InsteonModule.ProcessRawReceive(Object iCmdStr)
          Apr-09 11:16:02 AM Insteon Received Master Bedroom Motion Occupancy Sensor: (41.5F.46) Go ON
          Apr-09 11:15:20 AM Insteon Received Master Bedroom Motion Occupancy Sensor: (41.5F.46) Go OFF
          Apr-09 11:15:00 AM FitbitSeer Timer elapsed. Updating Fitbit-data.
          Apr-09 11:13:43 AM Insteon Received Motion Occupancy Sensor: (41.5F.46) Go OFF
          Apr-09 11:13:40 AM Insteon Motion Sensor 41.5F.46 settings programmed successfully.
          Apr-09 11:13:34 AM Insteon Received Motion Occupancy Sensor: (41.5F.46) Go ON
          Apr-09 11:12:04 AM Insteon Replace device routine complete.
          Apr-09 11:12:04 AM Insteon Your system has been reprogrammed to support the replacement device. You will need to power down the device and restart it for some of the settings to take effect (Do NOT factory reset).
          Apr-09 11:12:04 AM Insteon Program And Replace Device - Process complete.
          Apr-09 11:11:59 AM Insteon ** To request help with this problem please post this log file to the forum along with a detailed description of what lead to this problem.
          Apr-09 11:11:59 AM Insteon ** An error occurred in this plug-in. The details have been written to the log file - C:\Program Files (x86)\HomeSeer HS3\Config\Insteon Error Report.Log
          Apr-09 11:11:59 AM Insteon ***:Error in CreateDevices: Device 18: Object reference not set to an instance of an object. -- Details System.NullReferenceException: Object reference not set to an instance of an object. at HSPI_Insteon.hspiAPI.HSAPI.CreateDevices(Boolean ReloadTables)
          Apr-09 11:11:46 AM Insteon Step 5 of 5: Updating Interface...
          Apr-09 11:11:46 AM Insteon Step 4 of 5: Finished updating linked devices, updating groups...
          Apr-09 11:11:46 AM Insteon Step 3 of 5: Updating linked devices...
          Apr-09 11:11:32 AM Insteon Step 1 of 5: Programming new device with links...
          Apr-09 11:11:32 AM Insteon Program And Replace Device - Process starting... (3F.CC.E9->41.5F.46)...
          Apr-09 11:11:30 AM Insteon Pass 2, Now attempting to reprogram your system for the replacement device...
          Apr-09 11:11:30 AM Insteon Pass 1, updating devices that appear to have stale link tables...RF devices are ignored..
          HomeSeer Version: HS3 Pro Edition
          Operating System: Microsoft Windows 10 Pro
          Processor Type and Speed: i7 - 3.26 GHz
          Total Physical Memory: 16Gig

          Plugins: BlBackup | EasyTrigger | FitbitSeer | HSTouchServer | Insteon | WeatherXML

          Comment


            #20
            Attempted re-program to no avail. Only way to recover was to factory reset the MS-II and then delete it from your plugin. Then once gone re-add it with a slightly different name. Then it came in correctly.

            I was intentionally pushing it with your first beta so was not surprised that it choked a bit.

            Tony
            HomeSeer Version: HS3 Pro Edition
            Operating System: Microsoft Windows 10 Pro
            Processor Type and Speed: i7 - 3.26 GHz
            Total Physical Memory: 16Gig

            Plugins: BlBackup | EasyTrigger | FitbitSeer | HSTouchServer | Insteon | WeatherXML

            Comment


              #21
              Originally posted by randy_h View Post
              I consider this a low priority cosmetic issue"

              Channel numbers for new features in Edit Device page are not reported exactly as they are on Device Management view.
              I could change the Channel number to match the :xx number of the address. I don't think they match for 6 btn KPLs either.
              Mark

              HS3 Pro 4.2.19.5
              Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
              Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
              Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

              Comment


                #22
                Originally posted by codemonkey View Post
                Attempted re-program to no avail. Only way to recover was to factory reset the MS-II and then delete it from your plugin. Then once gone re-add it with a slightly different name. Then it came in correctly.

                I was intentionally pushing it with your first beta so was not surprised that it choked a bit.

                Tony
                Not sure i'm going to be able to support the 'replacement' of an old MS with the a new MS. But please try this if you do it again.

                after the swap in the insteon.ini, add recreatedevice=1 to the [device] section of the new MS and restart the plugin. this may create the additional hs devices that are missing or incorrect
                Mark

                HS3 Pro 4.2.19.5
                Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                Comment


                  #23
                  Ok I don't have any more of the new motions at the moment but I will have replacements coming when they arrive. I'll be sure to give that a go if someone else doesn't beat me to it.

                  Correct me if I am wrong but I think you are creating the options for events for these devices. I'm wondering if there might be a way to create a range for the light level.

                  Right now it looks like you can only pick the exact level, but I would like to pick 0-150. That gives you more control than the dusk dawn trigger. (which I realize isn't working yet)
                  Attached Files
                  HomeSeer Version: HS3 Pro Edition
                  Operating System: Microsoft Windows 10 Pro
                  Processor Type and Speed: i7 - 3.26 GHz
                  Total Physical Memory: 16Gig

                  Plugins: BlBackup | EasyTrigger | FitbitSeer | HSTouchServer | Insteon | WeatherXML

                  Comment


                    #24
                    I want to point out that I have my heartbeat set to 23 minutes as I am actively using the temp sensor. Curious to see what the battery life will be. This will be day one of that test with 2 sensors.
                    HomeSeer Version: HS3 Pro Edition
                    Operating System: Microsoft Windows 10 Pro
                    Processor Type and Speed: i7 - 3.26 GHz
                    Total Physical Memory: 16Gig

                    Plugins: BlBackup | EasyTrigger | FitbitSeer | HSTouchServer | Insteon | WeatherXML

                    Comment


                      #25
                      Originally posted by mnsandler View Post
                      I could change the Channel number to match the :xx number of the address. I don't think they match for 6 btn KPLs either.
                      That would be beneficial, if you decide to implement. Helps my brain track devices/roles between pages.

                      randy

                      Comment


                        #26
                        HomeSeer Version: HS3 Pro Edition
                        Operating System: Microsoft Windows 10 Pro
                        Processor Type and Speed: i7 - 3.26 GHz
                        Total Physical Memory: 16Gig

                        Plugins: BlBackup | EasyTrigger | FitbitSeer | HSTouchServer | Insteon | WeatherXML

                        Comment


                          #27
                          insteon@verizon.net with paypal works just fine.
                          Mark

                          HS3 Pro 4.2.19.5
                          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                          Comment


                            #28
                            Without a space works for me.

                            Thank you.
                            HomeSeer Version: HS3 Pro Edition
                            Operating System: Microsoft Windows 10 Pro
                            Processor Type and Speed: i7 - 3.26 GHz
                            Total Physical Memory: 16Gig

                            Plugins: BlBackup | EasyTrigger | FitbitSeer | HSTouchServer | Insteon | WeatherXML

                            Comment


                              #29
                              Noticed that hearbeat related events are not logged. This may be by design but wanted to point it out.
                              HomeSeer Version: HS3 Pro Edition
                              Operating System: Microsoft Windows 10 Pro
                              Processor Type and Speed: i7 - 3.26 GHz
                              Total Physical Memory: 16Gig

                              Plugins: BlBackup | EasyTrigger | FitbitSeer | HSTouchServer | Insteon | WeatherXML

                              Comment


                                #30
                                Also noticed that the LED off command seems to be hit or miss.
                                When I set it to off, it seemed like it worked for a bit. But a half hour later I checked it again and the light LED was indicating motion again. The change may have occurred when the last heartbeat was transmitted.
                                HomeSeer Version: HS3 Pro Edition
                                Operating System: Microsoft Windows 10 Pro
                                Processor Type and Speed: i7 - 3.26 GHz
                                Total Physical Memory: 16Gig

                                Plugins: BlBackup | EasyTrigger | FitbitSeer | HSTouchServer | Insteon | WeatherXML

                                Comment

                                Working...
                                X