Hoping someone is facing the same....
I have two HS-WS100 switches that immediately after turning them on, they switch off and back on independently. I have no Events tied to these devices. When I look in the log, it seems to be a Scene change - (see Below)
When I initially turn it on, it sets to 1000, then it switches off with a 255, then back on with a 2000 and stays on..... Note no events or anything happens in between.
I tried updating the firmware to 5.17, but that made no difference...
-------------------LOG------------------------------
Jan-25 11:24:36 AM Z-Wave Device: BEDROOMS LIGHTING CS_REDRM_LIGHT Set to 2000
Jan-25 11:24:33 AM Z-Wave Device: BEDROOMS LIGHTING REDRM_LIGHT Set to 255
Jan-25 11:24:33 AM Z-Wave Device: BEDROOMS LIGHTING CS_REDRM_LIGHT Set to 1000
-------------------LOG------------------------------
I have two HS-WS100 switches that immediately after turning them on, they switch off and back on independently. I have no Events tied to these devices. When I look in the log, it seems to be a Scene change - (see Below)
When I initially turn it on, it sets to 1000, then it switches off with a 255, then back on with a 2000 and stays on..... Note no events or anything happens in between.
I tried updating the firmware to 5.17, but that made no difference...
-------------------LOG------------------------------
Jan-25 11:24:36 AM Z-Wave Device: BEDROOMS LIGHTING CS_REDRM_LIGHT Set to 2000
Jan-25 11:24:33 AM Z-Wave Device: BEDROOMS LIGHTING REDRM_LIGHT Set to 255
Jan-25 11:24:33 AM Z-Wave Device: BEDROOMS LIGHTING CS_REDRM_LIGHT Set to 1000
-------------------LOG------------------------------
Comment